Walker Edison B48SXDEB Assembly Instructions Manual

Walker Edison Logo

Walker Edison B48SXDEB

Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com

 

General Assembly Guidelines

  1. Ensure that all parts and hardware are available before beginning assembly.
  2. Follow each step carefully to ensure the proper assembly of this product.
  3. Two people are recommended for ease in the assembly of this product.
  4. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts.
  5. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hole for the dowel, place a small amount of glue in the hole and insert the dowel. Wipe away excess glue immediately.                               FIG 1 General Assembly Guidelines                                                                                        In future assembly steps when dowels are necessary to attach assembly parts together, place a small amount of glue on the end of the dowel before attaching parts together. Wipe away excess glue immediately.                                                                    FIG 2 General Assembly Guidelines
  6. A Phillips head screwdriver is required for the assembly of this product.  FIG 3 General Assembly Guidelines
  7. Power tools should not be used to assemble this product.   FIG 4 General Assembly Guidelines
  8. Drill may be needed for securing product to wall.

 

Parts List

FIG 5 Parts List

FIG 6 Parts List

 

Hardware List

FIG 7 Hardware List

FIG 8 Hardware List

 

FIG 9 Philips head screwdriver Philips head screwdriver required for assembly (not included)

The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included.

 

Step 1

FIG 10 Step 1

Insert wooden dowel (A) into part (7), then secure cam bolt (B) into part (1) with Philips head screwdriver as per diagram.

Step 2

FIG 11 Step 2

Secure cam bolt (B) into parts (8,9,10) with Philips head screwdriver as per diagram.

 

Step 3

FIG 12 Step 3

Insert wooden dowel (A) into parts (5,6), then secure cam bolt (B) into parts (5,6) with Philips
head screwdriver as per diagram.

 

Step 4

FIG 13 Step 4

Insert wooden dowel (A) into parts (3,4,12) as per diagram.

 

Step 5

FIG 14 Step 5

FIG 15 Step 5

Using cam lock(C) secure part (9) into parts (5,6) with Philips head screwdriver as per diagram.

 

Step 6

FIG 16 Step 6

FIG 17 Step 6

Using cam lock(C) secure part (10) into parts (4) ,part (8) into part (3) with Philips head screwdriver as per diagram.

 

Step 7

FIG 18 Step 7

FIG 19 Step 7

Using cam lock(C) secure part (5) into parts (12) with Philips head screwdriver as per diagram.

 

Step 8

FIG 20 Step 8

FIG 21 Step 8

Using cam lock(C) secure part (6) into parts (12) with Philips head screwdriver as per diagram.

 

Step 9

FIG 22 Step 9

FIG 23 Step 9

Using cam lock(C) attach parts (8,10) into part (7) with Philips head screwdriver as per diagram.

 

Step 10

FIG 24 Step 10

Using screw (D) attach part (2) into parts (5,6) with hex key (E) as per diagram.

 

Step 11

FIG 25 Step 11

Secure part (18) into part (2),then using screw (D) attach part (2) into parts (3,4) with hex key (E) as per diagram.

 

Step 12

FIG 26 Step 12

Using bolt (F) attach connector (M) to parts (14,15,16) with hex key (E) as per diagram.

 

Step 13

FIG 27 Step 13

Using bolt (F) attach connector (L) to parts (14,15,16) with hex key (E) as per diagram.

 

Step 14

FIG 28 Step 14

Using bolt (F) attach connector (M) to part (2) with hex key (E) as per diagram.

 

Step 15

FIG 29 Step 15

Put part (13) as per diagram.

 

Step 16

FIG 30 Step 16

FIG 31 Step 16

Using cam lock(C) secure part (1) to parts (3,4,5,6,7) with Philips head screwdriver as per diagram.

 

Step 17

FIG 32 Step 17

Using screw (S) secure plastic wedge (N) to part (13) with Philips head screwdriver as per diagram.

 

Step 18

FIG 33 Step 18

Place sticker (P) cover the holes as per diagram .

 

Step 19

FIG 34 Step 19

Insert shelf support pin (G) into parts (3,4,5,6) as per diagram. Make sure you place the four shelf  support pins (G) in the same level. So the shelf is not titled .Put part (11) into unit as per diagram. Tilt and rest the adjustable shelf(11) onto the shelf support pins .

 

Step 20

FIG 35 Step 20

Using bolt (R) secure pulley (K) into part (17) ,then using screw (J) attach plate (Q) into part (17)
with Philips head screwdriver as per diagram.

 

Step 21

FIG 36 Step 21

Place plate (Q) on door into groove.

 

Step 22

FIG 37 Step 22

Hang pulley (K) to part (7), then press down to hold the door.

 

Step 23

FIG 38 Step 23

if necessary, adjust the pre-attached Floor Levelers at the bottom to level the unit.

 

Step 24

FIG 39 Step 24

 

 

Read More About This Manual & Download PDF:

Walker Edison B48SXDEB Assembly Instructions Manual – Download [optimized]
Walker Edison B48SXDEB Assembly Instructions Manual – Download

Questions about your Manual? Post in the comments!

Leave a comment

Your email address will not be published.