Walker Edison B48CLY Bench Assembly Instruction Manual

Item # : B48CLY

Assembly Instructions

Item no. B48CLY

Walker logo

Walker Edison®

Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com

Revised 10/07/2019 (E)

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.  P.1

General Assembly Guidelines

I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hole for the dowel, place a small amount of glue in the hole and insert the dowel. Wipe away excess glue immediately.

Glue 1Glue 2

In future assembly steps when dowels are necessary to attach assembly parts together, place a small amount of glue on the end of the dowel before attaching parts together. Wipe away excess glue immediately.

Glue 3

VI. A Phillips head screwdriver is required for the assembly of this product.

Phillips head screwdriver

VII. Power tools should not be used to assemble this product.

Power Tools Should Not Use

VIII. Drill may be needed for securing product to wall.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.  P.2

Parts List

B48CLY - Part List - 1

3 B48CLY - Part List - 3B48CLY - Part List - 9

3 B48CLY - Part List - 10

10 B48CLY - Part List - 10 2B48CLY - Part List - 2

B48CLY - Part List - 4B48CLY - Part List - 5B48CLY - Part List - 7

B48CLY - Part List - 8B48CLY - Part List - 6

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.  P.3

Hardware List

Wooden               Ø8x30mm    Wooden dowel   4 pcs
Cam lock                   Ø15x11mm   Cam lock   4 pcs
C    Cam bolt    Ø6x35mm     Cam bolt   4 pcs
Sticker                       Ø30mm         Sticker      4 pcs
Hex Key              M 4                Hex Key   1 pc
F    Bolt 12mm                  Ø6x12mm      Bolt          2 pcs
Bolt 25mm                Ø6x25mm       Bolt          12 pcs
Self support pin                                           Shelf support pin    4 pcs
Screw              Ø4x38mm        Screw   2 pcs
L   Plastic wedge                                   Plastic wedge   3 pcs
Screw              Ø3x17mm       Screw               3 pcs
Glue tube                              Glue tube         1 pc

 

 

Phillips head screwdriverPhilips head screwdriver required for assembly (not included)

The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.4

 

Step 1

B48CLY - Part List 1 - Step 1

Using cam bolt (C) secure part (1) with Philips head screwdriver as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.5

Step 2

B48CLY - Part List 6 - Step 1  B48CLY - Part List 6 - Step 2

 

 

 

 

 

Insert wooden dowel (A) into parts (6,8) and screw cam bolt (C) into designated hole on the side panel as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.  P.6

Step 3

B48CLY - Part List 7 - Step 1B48CLY - Part List 7 - Step 2

Using bolt (G) secure parts (4,5) into parts (2,3,10 ) with hex key (E) as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.7

Step 4

B48CLY - Part List 8 - Step 1

 

 

B48CLY - Part List 8 - Step 2

Attach and align the bottom panel (8) to side panel (6) using cam lock (B).

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.8

Step 5

B48CLY - Part List 9 - Step 2

B48CLY - Part List 9 - Step 1

Using screw (K) secure part (5) into part (8) with Philips head screwdriver as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.9

Step 6

B48CLY - Part List 10 - Step 1

Put part (9) into parts (5,6,8) as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.10

Step 7

B48CLY - Part List 11 - Step 1

 

 

B48CLY - Part List 11 - Step 2

 

Position the Top Panel (1) onto the inserted Wooden Dowels and fasten it in place with Cam Lock (B) and Bolts (F, G) as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.11

Step 8

B48CLY - Part List 12 - Step 1

B48CLY - Part List 12 - Step 2B48CLY - Part List 12 - Step 3

Using screw (M) secure plastic wedge (L) with Philips head screwdriver as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.12

Step 9

B48CLY - Part List - 13

Place sticker (D) cover the holes as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.13

Step 10

B48CLY - Part List - 14

B48CLY - Part List 14 - Step 1B48CLY - Part List 14 - Step 2

Put shelf support pin (J) into parts (5,6) ,then put part (7) into cabinet as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.   P.14

Step 11

B48CLY - Part List - 15

Final Assembly

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.  P.15

Walker Edison B48CLY Bench Assembly Instruction Manual – Download [optimized]
Walker Edison B48CLY Bench Assembly Instruction Manual – Download

Leave a comment

Your email address will not be published.