Walker Edison B48AIEB Bench Assembly Instructions Manual

Item # : B48AIEB
Assembly Instructions

Walker Edison B48AIEB Bench

Walker logo
Walker Edison

Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com

Revised 16/07/2019(L)

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.      P.1

General Assembly Guidelines

I.     Ensure that all parts and hardware are available before beginning assembly.
II.    Follow each step carefully to ensure the proper assembly of this product.
III.  Two people are recommended for ease in the assembly of this product.
IV.   The main type of hardware used to assemble this product are: bolts and screws.
V.     Power tools should not be used to assemble this product.

Power tools
VI.    Drill may be needed for securing product to wall.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.2

Parts List

Walker Edison B48AIEB Bench Parts List

 

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.    P.3

 

Hardware List

Hardware Bolt       Ø1/4x12mm       Bolt             12 pcs
Hardware Bolt       Ø1/4x30mm       Bolt             2 pcs
Hardware      M4                      Hex Key     1 pc

The hardware quantities listed above are required for proper assembly.

Some extra hardware may also have been included.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.    P.4

Step 1

Walker Edison B48AIEB Bench Assembly Step 1

Using bolts (A,B) secure part (2) into part (1) with hex key (c) as per diagram.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.5

Step 2

Walker Edison B48AIEB Bench Assembly Step 2

Using bolt (A) secure part (4) into part (3) with hex key (C)as per diagram.
Note: Do not fully tighten all the bolts until you finish assembling all parts .Once assembled ,go back to fully tighten all bolts .This will make the assembly easier.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.6

Step 3

Walker Edison B48AIEB Bench Assembly Step 3

Using bolt (A) secure part (4) into part (2) with hex key (c) as per diagram. Then fully tighten all the bolts.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.7

Step 4

Walker Edison B48AIEB Bench Assembly Step 4

Position the assembled unit at the desired location If necessary, adjust the floor levelers at the bottom of the legs (4) to the level the unit.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.   P.8

Step 5

Walker Edison B48AIEB Bench

Final Assembly

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.9

 

Walker Edison B48AIEB Bench Assembly Instructions Manual – Download [optimized]
Walker Edison B48AIEB Bench Assembly Instructions Manual – Download

Leave a comment

Your email address will not be published.