VIVOTEK FD9369 MP Dome Network Camera Fixed Lens

Warning Before Installation

The product must be installed and protected in a location that is not easily accessible, and is away from impacts or heavy vibration. For example, at the location where the surveillance cameras are looking down or installed at high positions such as on a wall, or at least 3 meters above the ground.

• The product should be used in compliance with local laws and regulations.
• Before installation, the product should be stored in a dry and ventilated environment.

Package Contents

Hardware Installation

NOTE:

1. The camera is only to be connected to PoE networks without routing to outside plants.
2.  For PoE connection, use only UL listed I.T.E. with PoE output.
3. If powered by a power adapter, the adapter should be properly grounded.

1. Stretch the waterproof tape by twice its length and wind around the cables.
2. The tape should overlap the cable joints by 20mm.
3. All connectors, whether they are used or not, should be waterproof.

Please contact authorized distributors for warranty and RMA service. Visit https://www.vivotek.com/support/warranty-rma”

All specifications are subject to change without noice. Copyright © 2021 VIVOTEK INC. All rights reserved.

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C. |T: +886-2-82455282| F: +886-2-82455532| E: sales@vivotek.com

VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics T: +31 (0)20 800 3817 E: saleseurope@vivotek.com

VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131 |T: 408-773-8686| F: 408-773-8298| E: salesusa@vivotek.com 

Documents / Resources

VIVOTEK FD9369 MP Dome Network Camera Fixed Lens [pdf] Installation Guide FD9369, MP Dome Network Camera Fixed Lens, FD9369 MP Dome Network Camera Fixed Lens

References

• User Manual