vimitty OTH-AB202MAX Max Pro Detachable Wireless Remote Selfie Tripod Stand
Product Introduction
Product Parameters
| Model | OTH-AB202MAX+ |
| Weight | 342 g /12.06 oz |
| Battery Capacity | 50mAh |
| Remote Distance | ＜10m(33ft) |
| Remote Button Lifespan | ＞20,000 times |
| Input | 5V/110mAh |
| Folded Size | 1.57×1.41×11.45 in |
| Extended length without tripod activated | Approx. 11.45-57.08 in |
| Extended length with tripod activated | Approx. 12-56.88 in |
| Compatible Device | IOS 7.0/Android 5.0 and above |
| Device width | Approx. 2.16-3.42 in |
| Material | Aluminum+ABS+PC |
Detach/attach Remote Controller & Charging
Charging port
When battery is low, detach the remote controller and charge with the Micro USB included in the package.
Detach Remote Controller:
Lift and pull out the remote controller.
Attach Remote Controller:
Insert top of the remote controller first and press down untill a click sound is heard.
How To Use
Step 1:
Press the triangle button on the bottom of the tripod to release tripod legs.
Step 2:
Hold the handle sleeve with one hand and the pull handle of the phone holder with the other hand to pull out the telescopic rod. Adjust to desired height.
Tripod legs will open automatically as the telescopic rod being pulled out.
Step 3:
Widthwise set your phone inside the samartphone holder by releasing the top cap.
Note: please avoid stuck the button of your phone.
Attention
- Do not pull legs to open tripod.
- Push the handle sleeve all the way down so that the tripod legs are fully opened and stable.
How to close
Step 1:
Remove your mobile phone by releasing the top cap.
Step 2:
Hold the handle sleeve and use the other hand to push the aluminum alloy telescopic arm back from the top cap.
Step 3:
If the tripod legs are not fully closed, press it by hand again.
NOTE: if you open the tripod, the tripod will close automatically when push back the aluminum alloy telescopic arm.
Manual opera on is prohibited.
Additional Features
Dual-Cold Shoe Mount
Vimitty selfie stick tripod is equipped with two additional cold shoe mount, which can be installed with fill lights, flashes, microphone and other devices to expand more usage scenarios, suitable for night video recording, live broadcast, Selfie, etc.
Multi-rotation Angle Support
Vimitty selfie stick is super adjustable which provides a 180° vertical rotation angle of bracket and a 270° horizontal rotation angle of phone holder
Connect Bluetooth
Step 1:
Press button on remoter controller for 35, green light flashes into pairing mode.
Step 2:
Active Bluetooth function on your device.
Select “vimitty” for pairing The blue light goes out after connected.
Step 3:
Press the button once to take pictures when connected smartphone is in camera mode.
LED Indicator
| Status | Light Type | Description |
| Switch On | Green light flashing | Press and hold on to the camera button for 3s into pairing mode |
| Switch Off | LED light off | Press and hold on to the camera button for 3s to turn off remote |
| Standby | LED light off | Remote will standby after 10 minutes without operation. Press the button once to active, green light will flash,please reconnect with phone again. |
| Low Power | Red light flashing | Charging with Micro-USB cable included |
| Charging | Red light on | Charge for 2 hours |
| Fully Charged | LED light off | Remove USB cable and keep it |
| Connected | Green light on | Press button once to take pictures |
NOTE: Bluetooth will automatically disconnect when the distance is greater than or equal to 10 meters.
Web: www.vimitty.com
Email: support@vimitty.com
Made in China
Documents / Resources
 | vimitty OTH-AB202MAX Max Pro Detachable Wireless Remote Selfie Tripod Stand [pdf] User Manual OTH-AB202MAX, OTH-AB202MAX Max Pro Detachable Wireless Remote Selfie Tripod Stand, Max Pro Detachable Wireless Remote Selfie Tripod Stand, Detachable Wireless Remote Selfie Tripod Stand, Wireless Remote Selfie Tripod Stand, Remote Selfie Tripod Stand, Tripod Stand |
