VZ4W Wireless Visualizer
Wi-Fi Connection
Instruction
VZ4W Wireless Visualizer
WiFi AP Mode Connection
- Switch to the Wi-Fi mode and the Wi-Fi LED indicator will be emitted green with flashing.
- Open the wireless network list on the computer then select the [VZ4W_5G_xxxxxx] in the network list and input the password for connection (default: 88889999) to start the connection.
- When the connection is successful, the Wi-Fi LED indicator will emit green light.
- Launch VisualCam software and select the connection mode to “Direct Wi-Fi (APMode) Connection”.
PS. When the direct Wi-Fi AP mode is connected, the Internet will be disconnected.
User can launch any web browser and enter the default IP [192.168.100.1] in the address bar.
Setting Wi-Fi Client (STA) mode to connect to the Internet.
WiFi Client (STA) Mode Connection
- Switch to the Wi-Fi mode and the Wi-Fi LED indicator will be emitted green with flashing.
- Open the wireless network list on the computer then select the [VZ4W_5G_xxxxxx] in the network list and input the password for connection (default: 88889999) to start the connection.
- Open the web browser and enter the default IP [192.168.100.1] in the address bar.
- Enter the login account [admin] and default password [9999] and click Login.
- After logging to the web page, you can do the live preview and configure the settings on the web page.
No Item Function Descriptions 1 Wi-Fi Mode Select Client Mode 2 List of Wi-Fi Wireless Click the wireless device and the following image will be displayed.
| Network Device Names |  Enter the password to connect to various wireless network devices |
When the STA mode is configured, the VZ4W Wi-Fi will reconnect, and Wi-Fi LED indicator will emit blue light
If successfully connected to the network, the device will be in Wi‐Fi Client mode.
If unable to connect to the network, switch to AP mode by pressing the resolution button on the control panel, or reset by pressing the Reset on the back panel.
Setting the PC, or NB, to the same Wi-Fi-SSID,(ex:Mysher), Launch VisualCam software and select the connection mode to “WiFi STA (Client Mode) Connection”.
Web Page Menu Function Description
Login Screen
| ||
| No | Item | Function Descriptions |
| 1 | User Login Account | Enter user login account (default: admin) |
| 2 | User Password | Enter user password (default: 9999) |
| 3 | Remember user account and password | Save user login account and password to the browser. When you log in next time, there is no need to re-enter them |
| 4 | Login | Log into the administrator screen on the website |
Live Viewing
| ||
| No | Item | Function Descriptions |
| 1 | Preview window | Display the screen currently captured by VZ4W |
| 2 | Autofocus | Automatically adjust the image to have the best brightness and focusing performance |
| 3 | Lamp mode toggle switch | Click lamp mode toggle switch: off / brightness 1 / brightness 2 / brightness 3 |
| 4 | Zoom In | Zoom in image |
| 5 | Zoom Out | Zoom out image |
| 6 | Rotate the image | Rotate the image: 0° / 90° / 180° / 270° / Flip / Mirror |
| 7 | Logout | Log out of the web page |
RTSP Streaming Settings
 | ||
| No | Item | Function Descriptions |
| 1 | Resolution | Show or set the RTSP output resolution and fps |
| 2 | Bit Rate (kbps) | Show or set the RTSP Bit rate (0 ~ 20000) |
| 3 | Port Number | Set the RTSP port (0 ~ 10000) |
| 4 | Audio Setting | Turn on/off RTSP audio |
| 5 | RTSP URL | Show current RTSP URL connection |
| 6 | Save | Save and change the RTSP streaming settings |
| 7 | Cancel | Cancel without saving |
| 8 | Default | Restore to default |
Wi-Fi Setting (Access Point Mode)
| ||
| No | Item | Function Descriptions |
| 1 | Wi-Fi Mode | Select Access Point or Client Mode |
| 2 | Wi-Fi 5G/2.4G | Switch between 5G / 2.4G under Wi-Fi Access Point mode |
| 3 | SSID | VZ4W SSID of wireless network |
| 4 | Channel | Select the channel based on different regions |
| 5 | Security | Wi-Fi encryption setting |
| 6 | Password | Connect the Wi-Fi SSID password |
| 7 | Show Password | Show the Wi-Fi SSID password |
| 8 | Save | Save and change the wireless network settings |
| 9 | Cancel | Cancel without saving |
Wi-Fi Setting (Client Mode)
| ||
| No | Item | Function Descriptions |
| 1 | Wi-Fi Mode | Select Access Point or Client Mode |
| 2 | Scan | Scan nearby wireless network devices |
| 3 | Disconnection | Disconnect from current wireless network device |
| 4 | Remove | Remove the selected wireless network device from the list |
| 5 | List of Wi-Fi Wireless Network Device Names | Click the wireless device and the following image will be displayed. Enter the password to connect to various wireless network devices |
| 6 | Device Name | Device name of wireless network |
| 7 | Connection Status | Display the wireless network device to which VZ4W is currently connecting. If connected, the corresponding field of said wireless device will display “Connected”, otherwise it would stay blank |
| 8 | Encryption | The current encryption setting of the wireless network device |
| 9 | Signal Status | Show the degree of the Wi-Fi signal |
System Network Information
| ||
| No | Item | Function Descriptions |
| 1 | Network | The network setting of this VZ4W device. When the DHCP function is closed, click edit to enter edit mode and change the network setting. |
Maintenance
 | ||
| No | Item | Function Descriptions |
| 1 | Reset to the default value | Select the reset button to resume the factory default setting as the web page setting |
| 2 | Reboot | Click the reboot button and reboot the device |
| 3 | Current Firmware version | Display current firmware version |
| 4 | Upgrade file path | Choose firmware *.bin file |
| 5 | Start Update | Click and start update the firmware |
User Account
 | ||
| No | Item | Function Descriptions |
| 1 | Device Name | Allow modify the Device Name |
| 2 | User Name | Allow modify the user login account (default: admin) |
| 3 | Password | Allow modify the login password (default: 9999) |
| 4 | Save | Save and change the wireless network settings |
| 5 | Cancel | Cancel without saving |
Launch VisualCam software and select the connection mode to “WiFi STA (Client Mode) Connection”.
Device name will show in the device list.
About
 | ||
| No | Item | Function Descriptions |
| 1 | Related Information | Display information about the manufacturing of this device |
Web Page Settings
Instruction
V1.2
Documents / Resources
 | VIISAN VZ4W Wireless Visualizer [pdf] Instruction Manual VZ4W_5G_xxxxxx, VZ4W, VZ4W Wireless Visualizer, Wireless Visualizer, Visualizer |