Trust DOORCAM-4000 Wireless Outdoor Video Doorbell

Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your Trust DOORCAM-4000 Wireless Outdoor Video Doorbell. This device features a 2K HD 3MP camera, two-way audio communication, person detection, night vision, and can be controlled via the free Trust WiFi application. It includes a wireless chime for indoor alerts.

Nội dung gói

Vui lòng kiểm tra xem tất cả các mục có trong gói hàng không:

• Camera chuông cửa có hình
• Wireless Chime Unit
• Mounting Materials (screws, wall plugs)
• Cáp sạc USB-C
• Hướng dẫn sử dụng

Các tính năng chính

• 2K HD 3MP Camera: Provides clear video recording and live view.
• Kết nối WiFi 2.4GHz: Ensures stable connection to your home network.
• Âm thanh hai chiều: Communicate with visitors directly through the app.
• Phát hiện người: Advanced motion detection to minimize false alerts.
• Xếp hạng chống nước IP65: Được thiết kế để sử dụng ngoài trời trong nhiều điều kiện thời tiết khác nhau.
• Tầm nhìn ban đêm: Tầm nhìn rõ ràng ngay cả trong điều kiện ánh sáng yếu.
• Kiểm soát ứng dụng: Manage settings, view live feed, and receive notifications via the Trust WiFi app.
• Lưu trữ cục bộ: Supports Micro SD card up to 256GB for secure video storage (card not included).
• Tùy chọn nguồn điện linh hoạt: Can be powered wirelessly via battery or wired (8-24V).
• Wireless Chime Included: Hear doorbell rings inside your home.

The Trust Video Doorbell features 2K HD 3MP video, night vision, motion detection, and IP65 splash resistance for reliable outdoor performance.

Cài đặt

Follow these steps to set up your Trust DOORCAM-4000 Video Doorbell and connect it to the Trust WiFi app.

App Installation and Device Pairing

1. Step 1: Download the Trust WiFi App.
   Tìm kiếm "Trust WiFi" in your smartphone's app store (iOS or Android) and install the application.
2. Step 2: Open the Trust WiFi App.
   Launch the Trust WiFi application on your smartphone.
   

   The Trust WiFi app allows full control and monitoring of your doorbell.
3. Step 3: Add Device.
   In the app, select "Add Device" or tap the "+" icon. Ensure Bluetooth is enabled on your smartphone.
4. Step 4: Select Doorbell Camera.
   From the list of device categories, navigate to "Doorbell Camera" and select your doorbell model (DOORCAM-3000/4000).
5. Step 5: Reset Device.
   Follow the on-screen instructions to activate the doorbell camera by holding down the ON/OFF button for 5 seconds. Ensure the LED indicator is flashing red and a tone is heard. If the LED is not flashing red or no tone is heard, press the reset button for 5 seconds. Then select "Next step" in the app.
6. Step 6: Connect to 2.4GHz WiFi.
   Select your 2.4 GHz WiFi network and enter the password. Quan trọng: The camera only operates on a 2.4 GHz WiFi network. Click "Next".
7. Step 7: Confirm WiFi Credentials.
   Review your WiFi details and click "Confirm and Proceed".
8. Step 8: Scan QR Code.
   Scan the QR code displayed on your smartphone screen with the doorbell camera. Hold the camera at a distance of 15 to 20 cm from the QR code. The camera will emit a confirmation signal. Select "I Heard a Prompt" in the app.
9. Step 9 (Optional): Name Your Camera.
   You can assign a custom name to your doorbell camera. Press "Done" to confirm.
10. Bước 10: Quá trình cài đặt hoàn tất.
    The device will now be added to your app. Once the installation is complete, you can access the live feed and settings.

Cài đặt vật lý

The doorbell offers flexible installation options, either wireless (battery-powered) or wired (8-24V).

The doorbell can be installed wirelessly or wired, offering flexible placement options.

• Cài đặt không dây: Use the provided mounting materials to secure the doorbell to your desired outdoor location. Ensure the battery is charged via the USB-C cable before installation.
• Cài đặt có dây: Connect the doorbell to existing 8-24V doorbell wiring. Consult a qualified electrician if you are unsure about wiring procedures.

Hướng dẫn Cài đặt Video

Hướng dẫn sử dụng

Once installed and connected, operate your video doorbell using the Trust WiFi app.

• Sống View: Mở ứng dụng để view Bạn có thể xem trực tiếp hình ảnh từ camera chuông cửa bất cứ lúc nào.
• Giao tiếp hai chiều: When a visitor presses the doorbell or motion is detected, you will receive a notification. Tap the notification to answer and speak with the visitor using the built-in microphone and speaker.
• Ghi âm: The camera can optionally record in 3MP (2K) HD when the doorbell is pressed or motion is detected. Recordings are saved to a Micro SD card (if installed).
• Tầm nhìn ban đêm: The doorbell automatically switches to night vision mode in low-light conditions, providing clear images.
• Chime Operation: The included wireless chime will sound when the doorbell button is pressed, alerting you inside your home.

Monitor your entrance 24/7 with motion detection and night vision capabilities.

Engage in two-way audio communication with visitors directly from your smartphone.

BẢO TRÌ

• Vệ sinh: Lau sạch ống kính camera và bề mặt chuông cửa bằng khăn mềm.amp vải. Tránh chất tẩy rửa mài mòn.
• Sạc pin: If using wireless installation, monitor the battery level via the app. Recharge the doorbell using the provided USB-C cable when necessary.
• Cập nhật chương trình cơ sở: Regularly check the Trust WiFi app for available firmware updates to ensure optimal performance and security.
• Thẻ micro SD: If using local storage, periodically check the Micro SD card for storage capacity and data integrity. Format the card through the app if needed.

Easily recharge your doorbell using the included USB-C cable.

Xử lý sự cố

• Chuông cửa không kết nối được với WiFi: Ensure your WiFi network is 2.4 GHz. Check your WiFi password. Move the doorbell closer to your router.
• Không có thông báo: Check app notification settings on your smartphone and within the Trust WiFi app. Ensure the doorbell has a stable internet connection.
• Chất lượng video kém: Ensure the camera lens is clean. Check your WiFi signal strength.
• Các vấn đề về phát hiện chuyển động: Adjust motion detection sensitivity in the app. Ensure the detection area is clear of obstructions.
• Chuông không reo: Ensure the wireless chime is powered on and paired with the doorbell. Check its proximity to the doorbell.
• Pin hết nhanh: Reduce motion detection sensitivity or frequency of recordings. Ensure the doorbell is not in an area with constant activity.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

The Trust DOORCAM-4000 Video Doorbell comes with a Bảo hành 2 năm kể từ ngày mua. Bảo hành này bao gồm các lỗi sản xuất và trục trặc trong quá trình sử dụng bình thường.

For technical support, troubleshooting assistance, or warranty claims, please visit the official Trust webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để xác nhận bảo hành.