1. Giới thiệu
Thank you for choosing the HEBEOT Self-Resetting Door Release Button. This device is designed for secure and convenient access control in various environments. It features a durable construction and a self-resetting mechanism for reliable operation. Please read this manual carefully before installation and use to ensure proper function and safety.
Hình 1: Mặt trước view of the HEBEOT Self-Resetting Door Release Button, showing the "PRESS TO EXIT" text and green button.
2. Tính năng sản phẩm
- Vật liệu bền: Constructed from aluminum alloy with a stainless steel panel, ensuring suitability for both indoor and outdoor use.
- Độ bền được cải thiện: Features a built-in anti-deformation spring for extended service life.
- Thiết kế thanh lịch: The 3.85mm thick stainless steel panel is brushed using a wire drawing process, providing a beautiful and shiny appearance.
- Hiệu suất mạnh mẽ: IK10 explosion-proof rating for increased safety.
- Clear Indication: The green button is highly visible and engraved with "PRESS TO EXIT" for clear operation.
- Ứng dụng đa năng: Ideal for various access control security and electronic access control systems.
Figure 2: Detail of the 3.85mm thick stainless steel panel, highlighting its brushed finish for durability and corrosion resistance.
3. Nội dung gói hàng
Khi mở gói hàng, vui lòng kiểm tra xem tất cả các thành phần đều có đầy đủ và không bị hư hỏng:
- 1 x HEBEOT Self-Resetting Door Release Button
- 2 x Vít lắp
- 2 x Rubber Plugs (for screw holes)
Figure 3: Contents of the package, including the door release button, two mounting screws, and two rubber plugs for secure installation.
4. Thông số kỹ thuật
| Tham số | Giá trị |
|---|---|
| Tên sản phẩm | Switch Button / Door Release Button |
| Thương hiệu | HEBEOT |
| Số hiệu mẫu | PE7J254XY81SW4DNT4F2 |
| Màu sắc | As shown (Silver panel, Green button) |
| Vật liệu | Stainless Steel, Aluminum Alloy |
| Tậptage | 12-24 V DC |
| Dòng điện định mức | 5 Một |
| Chế độ hoạt động | Self-Resetting Type |
| Explosion-proof Class | IK10 |
| Nhiệt độ hoạt động | -20 đến 50 °C |
| Độ ẩm hoạt động | 10% ~ 99% Relative Humidity |
| Kích thước bảng điều khiển | Xấp xỉ 86 x 86 mm (3.39 x 3.39 inch) |
| Kích thước sản phẩm (D x R x C) | 8 x 5 x 5 cm (3.15 x 1.97 x 1.97 inch) |
| Trọng lượng sản phẩm | 100 g (0.22 lbs) |
5. Thiết lập và Cài đặt
This door release button is designed for easy installation. Please follow these steps carefully:
- Chọn Vị trí: Select a suitable location near the door or access point where the button will be easily accessible. Ensure the surface is flat and stable.
- Đánh dấu điểm khoan: Place the button panel against the wall or door frame and mark the positions for the two mounting screws.
- Lỗ khoan: Drill appropriate holes at the marked points. If installing on a hollow wall, use the provided rubber plugs as anchors.
- Dây điện: Connect the button's wires to your access control system. Refer to your access control system's manual for specific wiring diagrams. Typically, the button acts as a normally open (NO) or normally closed (NC) contact to trigger the door release.
Hình 4: Phía sau view of the button showing the wiring terminals. Ensure correct polarity and connection type (NO/NC) as per your access control system requirements.
- Mount the Button: Align the button panel with the drilled holes and secure it using the provided screws. Do not overtighten.
- Chức năng kiểm tra: After installation, test the button to ensure it properly triggers the door release mechanism of your access control system.
Ghi chú: Professional installation is recommended for complex access control systems. Always disconnect power before performing any wiring.
6. Hướng dẫn vận hành
The HEBEOT Self-Resetting Door Release Button operates on a simple push-to-exit principle.
- To exit a controlled area, simply press the green "PRESS TO EXIT" button.
- The button will momentarily activate the door release mechanism of your access control system.
- Once released, the button will automatically return to its original position, ready for the next use.
Hình 5: Ví dụample of the button in use within an office setting, demonstrating its application in access control systems.
7. Bảo trì
The HEBEOT Door Release Button requires minimal maintenance to ensure long-term performance:
- Vệ sinh: Periodically wipe the surface of the button and panel with a soft, damp vải. Tránh sử dụng chất tẩy rửa hoặc dung môi có tính mài mòn vì chúng có thể làm hỏng lớp hoàn thiện.
- Điều tra: Regularly inspect the button for any signs of physical damage, loose connections, or unusual operation.
- Điều kiện môi trường: While designed for indoor and outdoor use, avoid exposing the button to extreme conditions beyond its specified operating temperature and humidity ranges.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your HEBEOT Door Release Button, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Button does not trigger door release. |
|
|
| Button feels stuck or does not self-reset. |
|
|
| Button panel is loose. |
|
|
9. Bảo hành và Hỗ trợ
No specific warranty information is provided with this product. For technical support, troubleshooting assistance, or inquiries regarding replacement parts, please contact your retailer or the HEBEOT customer service department through the contact information provided at the point of purchase.
Please have your model number (PE7J254XY81SW4DNT4F2) and purchase date ready when contacting support.