Giới thiệu
This manual provides instructions for the Jada Toys Bigtime Muscle 1:24 2024 Ford Mustang Dark Horse Die-cast Car. This highly detailed replica is designed for display and light play, featuring opening parts and a durable die-cast metal construction. Please read this manual carefully to ensure proper handling and care of your model car.
Image: The Jada Toys 2024 Ford Mustang Dark Horse die-cast car displayed in its retail packaging.
Thông tin an toàn
Choking Hazard-Small parts. Not for children under 3 years.
This product contains small parts which may pose a choking hazard. Adult supervision is recommended for children playing with this item. Keep away from infants and young children.
Cài đặt
- Mở hộp: Carefully remove the die-cast car from its packaging. Ensure all protective materials are removed.
- Điều tra: Inspect the model for any visible damage or loose parts. If any issues are found, contact customer support.
- Vị trí: Place the model on a stable, flat surface for display or play. Avoid placing it in direct sunlight or extreme temperatures to prevent material degradation.
Các tính năng hoạt động
The Jada Toys 2024 Ford Mustang Dark Horse die-cast car features several interactive elements:
- Mở cửa: Gently pull the doors outward to open them. Do not force them beyond their natural range of motion.
- Mở nắp capo: Locate the small tab or groove on the front edge of the hood. Gently lift the hood to reveal the engine detail.
- Mở cốp xe: Locate the small tab or groove on the rear edge of the trunk. Gently lift the trunk to access the storage area.
- Bánh xe lăn: The wheels are designed to roll smoothly. Push the car gently on a flat surface for movement.
Image: The die-cast model with its hood and both doors open, showcasing the engine bay and interior.
Image: The die-cast model with its trunk and both doors open, showing the rear storage and interior.
BẢO TRÌ
- Vệ sinh: Use a soft, dry cloth to gently wipe the surface of the car. Avoid abrasive cleaners or solvents, as these can damage the paint finish.
- Loại bỏ bụi: For intricate areas, use a soft brush or compressed air to remove dust.
- Kho: When not on display, store the model in a cool, dry place away from direct sunlight and excessive humidity to preserve its condition.
Xử lý sự cố
- Stiff Opening Parts: If doors, hood, or trunk are stiff, apply gentle, even pressure. Do not force them, as this may cause breakage. Over time, mechanisms may loosen slightly with careful use.
- Bánh xe không lăn trơn tru: Check for any debris caught in the axles. Ensure the car is on a clean, flat surface.
- Vết xước/bong tróc sơn: Die-cast models are susceptible to paint damage from impacts. Handle with care. Minor touch-ups may be possible with model-specific paints, but consult a specialist if unsure.
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Kích thước sản phẩm | 8.5 x 3.63 x 2.5 inch |
| Trọng lượng sản phẩm | 1.3 pound |
| Số hiệu mẫu | 35276 |
| Tỉ lệ | 1:24 |
| Vật liệu | Kim loại đúc |
| Độ tuổi khuyến nghị | 8 tuổi trở lên |
| Nhà sản xuất | Đồ chơi Jada |
Hình ảnh: Side profile of the die-cast car, showing its length against a ruler for scale reference.
Bảo hành và Hỗ trợ
For information regarding warranty, returns, or customer support, please refer to the retailer's policy where the product was purchased or visit the official Jada Toys webđịa điểm.
Jada Toys Official Webđịa điểm: www.jadatoys.com
For specific product inquiries, please have your model number (35276) ready.