COMTEC ZDR043 Front and Rear Dash Camera System User Manual

1. Giới thiệu

Cảm ơn bạn đã muaasing the COMTEC ZDR043 Front and Rear Dash Camera System. This device is designed to record driving footage in Full HD, providing crucial evidence in case of an incident. It features a front camera, a rear camera, GPS functionality, a 2.7-inch LCD, and advanced safety features such as rear vehicle approach alerts and parking surveillance. This package also includes the HDROP-15 direct wiring cord for a stable power supply. Please read this manual thoroughly before installation and operation to ensure correct usage and optimal performance.

2. Sản phẩm hếtview

2.1 Các tính năng chính

• Front and Rear Full HD Recording: Captures clear footage from both the front and rear of your vehicle with 2 million effective pixels.
• Chức năng GPS: Records location and speed data, which can be viewed with dedicated playback software.
• Rear Vehicle Approach Alert: Notifies the driver when a vehicle approaches too closely from behind, helping to prevent potential road rage incidents.
• Parking Surveillance Function: Monitors your vehicle while parked, recording events triggered by impacts or motion (requires HDROP-15 direct wiring).
• High-Speed Start-up: Begins recording quickly after the vehicle starts.
• Màn hình LCD 2.7 inch: Allows for real-time viewing and playback of recorded footage.
• Included 32GB microSD Card: Cung cấp ample storage for recorded video.
• HDROP-15 Direct Wiring Cord: Enables direct power connection to the vehicle's ACC and IG lines for stable operation and parking surveillance.

2.2 Thành phần

The COMTEC ZDR043 system includes the following components:

• ZDR043 Main Unit (Front Camera)
• Camera sau
• Cáp kết nối máy ảnh phía sau
• Mounting Bracket (for front camera)
• Cigarette Lighter Power Cable (standard, though HDROP-15 is included in this set)
• Thẻ nhớ microSD 32GB
• HDROP-15 Direct Wiring Cord (approx. 4.0m)
• Hướng dẫn sử dụng (tài liệu này)

2.3 Sản phẩm View

3. Thiết lập và Cài đặt

Proper installation is crucial for the dash camera's performance. It is recommended to have this product installed by a professional if you are not familiar with automotive electrical systems.

3.1 Lắp thẻ nhớ microSD

1. Hãy đảm bảo camera hành trình đã được tắt nguồn.
2. Locate the microSD card slot on the main unit.
3. Insert the included 32GB microSD card into the slot until it clicks into place. Ensure the correct orientation.
4. Để tháo ra, hãy nhẹ nhàng đẩy thẻ cho đến khi thẻ bật ra.

3.2 Lắp đặt camera trước

1. Choose a location on your windshield that does not obstruct the driver's view and is within the wiper's sweep area. The area behind the rearview Gương thường là vật dụng lý tưởng.
2. Clean the chosen area thoroughly with an alcohol wipe and let it dry.
3. Gắn giá đỡ vào thiết bị chính.
4. Peel off the protective film from the adhesive pad on the mounting bracket.
5. Firmly press the bracket onto the windshield for at least 30 seconds.
6. Adjust the camera angle to ensure the lens captures a clear view of the road ahead, with approximately 60% road and 40% sky.

3.3 Lắp đặt camera sau

1. Select a position on your rear window that provides an unobstructed view and is centrally located.
2. Làm sạch kỹ lưỡng khu vực đã chọn.
3. Attach the rear camera using its adhesive mount.
4. Route the rear camera connection cable from the rear camera to the main unit, tucking it neatly along the headliner and pillar trims.
5. Connect the cable to the designated rear camera input port on the main unit.

3.4 Power Connection (HDROP-15 Direct Wiring)

The HDROP-15 direct wiring cord (approx. 4.0m) allows for a stable power supply directly from your vehicle's fuse box, enabling parking surveillance mode. This connection typically involves ACC (Accessory) and IG (Ignition) lines.

1. Xác định nguồn điện: Locate suitable ACC (power when ignition is on) and IG (constant power) fuse locations in your vehicle's fuse box. Consult your vehicle's owner's manual or a professional for assistance.
2. Kết nối dây: Connect the corresponding wires from the HDROP-15 to the identified power sources using appropriate fuse taps (not included).
3. Nối đất: Securely connect the ground wire of the HDROP-15 to a metal part of the vehicle chassis.
4. Kết nối với camera hành trình: Plug the HDROP-15 connector into the power input port on the main unit.
5. Bài kiểm tra: Start your vehicle to confirm the dash camera powers on and begins recording. Turn off the vehicle to test parking surveillance activation.

Thận trọng: Incorrect wiring can damage your vehicle's electrical system or the dash camera. If you are unsure, seek professional installation.

4. Hướng dẫn vận hành

4.1 Bật / Tắt nguồn

• Bật nguồn: The dash camera will automatically power on and begin continuous recording when the vehicle's ignition is turned on (ACC power is supplied).
• Tắt nguồn: The dash camera will automatically power off a few seconds after the vehicle's ignition is turned off. If parking surveillance is enabled, it will transition to parking surveillance mode.

4.2 Chế độ ghi

• Ghi liên tục: Records continuously in short segments (e.g., 1 minute files). When the microSD card is full, the oldest files bị ghi đè.
• Event Recording (G-sensor): Tự động lưu và khóa footage khi cảm biến G phát hiện ra tác động, ngăn không cho tác động đó bị ghi đè.
• Ghi sự kiện thủ công: Press a designated button on the unit to manually save and lock the current recording segment.

4.3 Chức năng GPS

The built-in GPS module records your vehicle's location, speed, and time data. This information is embedded in the video files và có thể viewed using the dedicated COMTEC playback software on a computer. Ensure the GPS antenna has a clear view trên bầu trời để thu sóng tối ưu.

4.4 Rear Vehicle Approach Alert

This function uses the rear camera to detect vehicles approaching rapidly or staying too close behind your car. When a potential threat is detected, the system will issue an audible and/or visual alert on the main unit's display. This feature is designed to increase driver awareness and help prevent dangerous situations.

• Kích hoạt: This feature is typically enabled by default or can be configured in the system settings.
• Độ nhạy: The sensitivity of the detection can usually be adjusted in the settings menu to suit your driving preferences.

4.5 Parking Surveillance Function

When connected via the HDROP-15 direct wiring cord, the ZDR043 can monitor your vehicle while parked. It will automatically start recording if an impact is detected (G-sensor) or if motion is detected in the camera's field of view (motion detection). This provides security even when you are away from your vehicle.

• Cài đặt: Parking surveillance settings, including sensitivity and recording duration, can be adjusted in the menu.
• Âm lượng thấptage Điểm dừng: The HDROP-15 includes a low voltage cut-off feature to prevent draining your vehicle's battery. You can typically set the voltage threshold in the dash camera's settings.

4.6 LCD Display and Menu Navigation

The 2.7-inch LCD displays live view, đã ghi âm footage, and menu options. Use the physical buttons on the unit to navigate through the menu, adjust settings, and playback videos. Refer to the on-screen prompts for specific button functions.

5. Bảo trì

5.1 Quản lý thẻ nhớ microSD

• Định dạng: It is recommended to format the microSD card regularly (e.g., once a month) using the dash camera's menu to maintain optimal recording performance and prevent data corruption.
• Thay thế: microSD cards have a limited lifespan. If you experience recording errors or frequent freezing, consider replacing the card with a high-quality, dash-cam-compatible microSD card.

5.2 Vệ sinh

• Ống kính: Gently wipe the front and rear camera lenses with a soft, lint-free cloth to ensure clear video quality. Avoid abrasive materials or harsh chemicals.
• Nội dung đơn vị: Clean the main unit and rear camera body with a slightly damp cloth. Do not use excessive moisture or spray cleaners directly onto the device.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your COMTEC ZDR043, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact COMTEC customer support.

7. Thông số kỹ thuật

8. Bảo hành và Hỗ trợ

The COMTEC ZDR043 main unit comes with a Bảo hành 3 năm của nhà sản xuất from the date of purchase. The HDROP-15 direct wiring cord and other accessories typically carry a Bảo hành 1 năm của nhà sản xuất. Vui lòng giữ lại bằng chứng mua hàng để yêu cầu bảo hành.

For technical support, troubleshooting assistance, or warranty inquiries, please contact COMTEC customer service through their official webtrang web hoặc thông tin liên lạc được cung cấp trên bao bì sản phẩm của bạn.

COMTEC Official Webđịa điểm: www.comtec.co.jp