Electro-Voice ZLX-12P-G2 12-inch Powered Loudspeaker User Manual

Giới thiệu

This manual provides essential information for the safe and effective use of your Electro-Voice ZLX-12P-G2 12-inch 2-way 1000W Bluetooth-enabled powered loudspeaker. It covers setup, operation, maintenance, troubleshooting, and technical specifications. Please read this manual thoroughly before operating the device.

The ZLX-12P-G2 is designed for professional audio applications, including live sound, DJ setups, and stage monitoring. This product bundle includes the ZLX-12P-G2 loudspeaker, an Auray SS-4420 Steel Speaker Stand, an Auray Speaker Stand Bag, and an XLR Cable.

Cài đặt

1. Mở hộp và kiểm tra

Carefully remove all components from the packaging. Verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your dealer immediately.

• Electro-Voice ZLX-12P-G2 Powered Loudspeaker
• Cáp nguồn IEC
• Auray SS-4420 Steel Speaker Stand
• Auray Speaker Stand Bag 51" Interior
• Cáp XLR

2. Vị trí vật lý

The ZLX-12P-G2 offers versatile placement options:

• Lắp đặt loa lên giá đỡ: Insert the loudspeaker onto the included Auray SS-4420 Steel Speaker Stand using the integrated pole cup. Ensure the stand is stable and properly secured.
• Floor Wedge Monitor: The enclosure is designed to be used on its side as a floor wedge monitor or kick-back.
• Subwoofer Pole Mounting: The loudspeaker can also be mounted on a subwoofer pole (sold separately).

Hình 1: Mặt trước view of the ZLX-12P-G2 loudspeaker.

Figure 2: Auray SS-4420 Steel Speaker Stand.

3. Kết nối

The ZLX-12P-G2 features a variety of input and output options on its rear panel:

• Input 1 & 2 (XLR-1/4" Combo): Connect microphones, mixers, or other audio sources using XLR or 1/4-inch TRS/TS cables.
• Aux Input (3.5mm): Connect mobile devices, laptops, or other consumer audio sources.
• Trộn ra (XLR): Provides a mixed output signal for connecting to additional loudspeakers or recording devices.

Hình 3: Các kết nối và điều khiển ở mặt sau.

Figure 4: Included XLR cable for audio connections.

4. Kết nối nguồn điện

Connect the supplied IEC power cable to the AC mains input on the rear panel of the loudspeaker and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting to power.

Hướng dẫn sử dụng

1. Bật/Tắt nguồn

To power on the loudspeaker, ensure all audio connections are made and then flip the power switch to the ON position. To power off, flip the switch to the OFF position. It is recommended to power off the loudspeaker before disconnecting any cables.

2. Ghép nối Bluetooth

The ZLX-12P-G2 features a built-in Bluetooth receiver for wireless audio streaming and control.

1. Ensure Bluetooth is enabled on your mobile device or computer.
2. On the ZLX-12P-G2 rear panel, activate Bluetooth pairing mode (refer to the LCD display and one-knob control for navigation).
3. Tìm kiếm available Bluetooth devices on your mobile device. The loudspeaker will appear as "ZLX-12P-G2".
4. Select the loudspeaker to pair. Once paired, you can stream audio wirelessly.

3. DSP Control and Input/Output Gain

The integrated DSP (Digital Signal Processor) can be controlled via the one-knob interface and LCD display on the rear panel. This allows for efficient setup and signal adjustment, including:

• Độ lợi đầu vào: Adjust the level for each input (Input 1, Input 2, Aux).
• Đầu ra tăng: Control the overall output level.
• Cài đặt trước EQ: Select from various equalization presets for different applications.
• Tích hợp loa siêu trầm: Configure settings for use with an external subwoofer.

Refer to the on-screen menu for detailed DSP parameter adjustments.

BẢO TRÌ

1. Vệ sinh

Để vệ sinh loa, hãy sử dụng một miếng vải mềm, khô. Đối với những vết bẩn cứng đầu, hãy dùng khăn hơi ẩm.amp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and internal components.

2. Lưu trữ

When not in use, store the loudspeaker in a cool, dry environment, away from direct sunlight and extreme temperatures. The included Auray Speaker Stand Bag can be used to protect the speaker stand during transport and storage.

Figure 5: Auray Speaker Stand Bag for protection.

Xử lý sự cố

If you encounter issues with your ZLX-12P-G2 loudspeaker, refer to the following common problems and solutions:

• Không có âm thanh:
  • Ensure the loudspeaker is powered on and the power cable is securely connected.
  • Check that input cables (XLR, 1/4", 3.5mm) are properly connected to both the source and the loudspeaker.
  • Verify that input and output gain levels are not set to minimum.
  • Confirm the audio source is playing and its volume is up.
• Bluetooth không kết nối:
  • Ensure Bluetooth is enabled on your device and the loudspeaker is in pairing mode.
  • Move your device closer to the loudspeaker to ensure it is within the 10-meter Bluetooth range.
  • Hãy thử hủy ghép nối và ghép nối lại thiết bị.
• Âm thanh bị méo:
  • Reduce the input gain on the loudspeaker or the output level from your audio source to prevent clipping.
  • Kiểm tra cáp xem có bị hư hỏng hoặc kết nối lỏng lẻo không.
  • Ensure the DSP settings are appropriate for your application.
• Loudspeaker Not Powering On:
  • Verify the power cable is fully inserted into both the loudspeaker and a working power outlet.
  • Kiểm tra ổ cắm điện bằng một thiết bị khác để xác nhận nó hoạt động bình thường.

If the issue persists after attempting these steps, please contact Electro-Voice customer support.

Thông số kỹ thuật

Figure 6: ZLX-12P-G2 loudspeaker dimensions.

Thông tin bảo hành

The Electro-Voice ZLX-12P-G2 loudspeaker comes with a Bảo hành nhà sản xuất 3 năm có giới hạn. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and registration details, please refer to the official Electro-Voice webtrang web hoặc liên hệ với bộ phận hỗ trợ khách hàng của họ.

Vui lòng giữ lại bằng chứng mua hàng của bạn để yêu cầu bảo hành.

Hỗ trợ khách hàng

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Electro-Voice customer support. You can typically find contact information, including phone numbers and online support portals, on the official Electro-Voice webđịa điểm.

Webđịa điểm: www.electrovoice.com

When contacting support, please have your product model (ZLX-12P-G2) and serial number ready.