ATOMSTACK A12 Pro

Hướng dẫn sử dụng máy khắc laser ATOMSTACK A12 Pro

Thương hiệu: ATOMSTACK | Người mẫu: A12 chuyên nghiệp

1. Giới thiệu

This manual provides detailed instructions for the safe and efficient operation of your ATOMSTACK A12 Pro Laser Engraving Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

Cảnh báo an toàn:

  • Always wear UV-filtering eye protection when operating the laser engraver.
  • Ensure proper ventilation to dissipate fumes and smoke generated during engraving/cutting.
  • Không để máy không có người giám sát trong quá trình vận hành.
  • Để vật liệu dễ cháy cách xa khu vực làm việc.
  • Familiarize yourself with the emergency stop button location.

2. Nội dung gói hàng

Xác minh rằng tất cả các mục được liệt kê dưới đây đều có trong gói hàng của bạn:

ATOMSTACK A12 Pro Laser Engraving Machine and accessories

Figure 2.1: ATOMSTACK A12 Pro Laser Engraving Machine and included accessories.

  • ATOMSTACK A12 Pro Laser Engraving Machine (Unibody Frame)
  • Đầu Laser
  • Bộ đổi nguồn (24V, 5A)
  • Cáp nguồn
  • Cáp USB (Loại-C)
  • Goggles (UV-filtering eye protection)
  • Fixed Focus Lens
  • Hướng dẫn sử dụng
  • Tools (H3 hexagon L-shaped wrench, M4 thumb screws)
  • Ổ đĩa flash
  • Ăng ten WiFi
  • Silicone Hose (air hose)
  • Wire Anchor
  • Cáp Clamp
  • 100*30 lint free cloth
  • Thanh trượt
  • Chuyển đổi phím

3. Hướng dẫn cài đặt

The ATOMSTACK A12 Pro features an unibody design for minimal assembly. Follow these steps to get started:

  1. Mở hộp: Carefully remove the machine and all accessories from the packaging. The machine is pre-calibrated and shipped as a single unit.
    Unboxing the ATOMSTACK A12 Pro

    Figure 3.1: The ATOMSTACK A12 Pro is ready to use right out of the box with its unibody design.

  2. Cài đặt thanh trượt: Attach the slider component to the designated rail on the machine. Secure it with the provided screws.
  3. Lắp đặt đầu laser: Mount the laser head onto the slider. Ensure it is firmly attached.
  4. Lắp đặt ăng-ten WiFi: Screw the WiFi antenna into its port on the machine's side.
  5. Lắp đặt ống dẫn và đường nối trục X: Connect the tubing and X-axis link lines as shown in the diagram to ensure proper cable management and operation.
  6. Kết nối nguồn và USB: Plug the power adapter into the machine and a power outlet. Connect the USB cable from the machine to your computer.
  7. Bật nguồn: Insert the switch key and turn it to the ON position. The machine is now ready for software setup.

    8. Video 3.1: A detailed guide on how to install and set up the ATOMSTACK laser engraver.

4. Hướng dẫn vận hành

4.1 Điều khiển bằng phần mềm

The ATOMSTACK A12 Pro supports multiple control methods:

  • ATOMSTACK PC Software: Exclusive software for simplified operation, ideal for beginners.
  • LightBurn & LaserGRBL: Traditional PC software for advanced users.
  • ATOMSTACK Mobile APP: Available on Android and Apple App Stores for WiFi control via smartphone.
Diverse control methods for ATOMSTACK A12 Pro

Hình 4.1: Hếtview of the various software and app control options for the laser engraver.

4.2 Quy trình khắc

  1. Vị trí vật liệu: Place your material flat on the engraving bed.
  2. Điều chỉnh tiêu điểm: Use the fixed-focus design for rapid and precise focusing in approximately 10 seconds.
  3. Cross Positioning: Utilize the newly added cross laser positioning feature for clear visibility of the laser's location, ensuring perfect alignment for engraving and easy horizontal adjustment.
    4. Cross positioning system for precise engraving

    Figure 4.2: The cross positioning system helps align objects and lock to edges for precise horizontal carving.

  4. Cài đặt phần mềm: Adjust engraving parameters (speed, power, passes) in your chosen software based on the material.
  5. Bắt đầu khắc: Initiate the engraving process from the software.

5. Tính năng và khả năng

  • Thiết kế nguyên khối: Sturdy all-aluminum unibody design, installation-free and pre-calibrated.
  • Tốc độ cao và độ chính xác: New dual-axis linear guide rail structure and high-speed motherboard allow engraving speeds up to 600mm/s, 3-6 times faster than traditional frame machines. Accuracy within 0.004 inches.
    • Amazing working speed of ATOMSTACK A12 Pro

    Figure 5.1: Comparison showing the significantly faster engraving speed of the A12 Pro.

  • Tia laser mạnh mẽ: 12000mW diode laser (Laser Class 4) with 50W machine power and a 0.05*0.06mm ultra-fine laser spot focus.
  • Thicker Cuts: Can cut through 8mm wood, 5mm black acrylic, and 0.02mm stainless steel in a single pass.
    • Enhanced laser cutting capabilities

    Figure 5.2: Demonstrates the maximum cutting thickness for various materials with the A12 Pro.

  • Diverse Material Compatibility: Engraves and cuts a wide range of materials including wood, acrylic, metal, glass, ceramics, leather, paper, cardboard, and more.
    • Diverse materials compatible with ATOMSTACK A12 Pro

    Hình 5.3: Ví dụamples of various materials that can be engraved or cut by the machine.

  • Automatic Power Failure Recovery: Memorizes engraving position and swiftly resumes from the paused point, ensuring uninterrupted production and material saving.
  • Tăng cường bảo mật: Equipped with 4-way limit switches, UV-filtering eye protection, a tilt detector with a 15-degree alarm, and an emergency stop button.

6. Bảo trì

  • Vệ sinh ống kính: Regularly clean the laser lens with the provided lint-free cloth to maintain optimal performance and prevent residue buildup.
  • Bôi trơn đường ray: Periodically apply a small amount of lubricant to the guide rails to ensure smooth movement of the laser head.
  • Loại bỏ mảnh vụn: Keep the engraving bed and surrounding area free of debris and dust. Use an air compressor or brush to clear away small particles.
  • Cập nhật chương trình cơ sở: Kiểm tra ATOMSTACK chính thức website periodically for firmware updates to ensure your machine has the latest features and bug fixes.

KHAI THÁC. Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Máy không bật nguồnPower cable loose; Emergency stop engaged; Key not turned.Check power connections; Disengage emergency stop; Turn key to ON.
Laser not firing/weak outputLens dirty; Incorrect focus; Low power setting in software.Clean laser lens; Adjust focus; Increase power setting.
Engraving is distorted/inaccurateLoose belts/rails; Material shifting; Incorrect software settings.Check and tighten belts/rails; Secure material; Verify software settings.
Phần mềm không kết nối được với máy tính.USB cable issue; Driver not installed; Incorrect COM port.Try different USB port/cable; Install drivers; Select correct COM port in software.

8. Thông số kỹ thuật

  • Kích thước sản phẩm: 23.22 x 23.22 x 7.08 inch
  • Trọng lượng sản phẩm: 18.74 pound
  • Công suất đầu ra của tia laser: 12000mW (12W)
  • Công suất máy: 50W
  • Kích thước điểm laser: 0.05*0.06mm
  • Tốc độ khắc: Lên tới 600 mm/giây
  • Sự chính xác: Sai số trong vòng 0.004 inch.
  • Kết nối: USB, WiFi (via Mobile APP)
  • Phần mềm được hỗ trợ: ATOMSTACK PC Software, LightBurn, LaserGRBL
  • Nhà sản xuất: Thâm Quyến AtomStack Technologies Co., Ltd.
  • Nước xuất xứ: Trung Quốc

9. Bảo hành và Hỗ trợ

Your ATOMSTACK A12 Pro Laser Engraving Machine comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official ATOMSTACK webđịa điểm.

Our professional technical and support teams are available 24/7 to answer any questions or concerns you may have.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.