Transformers EarthSpark Cyber-Combiner Terran Twitch and Robby Malto Instruction Manual

Sản phẩm trênview

This Transformers EarthSpark Cyber-Combiner set includes two action figures: Terran Twitch and Robby Malto. These figures can be played with individually or combined in two distinct configurations to create super-powered forms. The set also includes a detachable blaster accessory.

Độ tuổi: Phù hợp cho trẻ em từ 6 tuổi trở lên.

Cảnh báo: Choking Hazard – Small parts may be generated. Not for children under 3 years.

Image: The Transformers EarthSpark Cyber-Combiner set, showing Terran Twitch and Robby Malto figures in their retail packaging.

Cài đặt

Carefully remove the Terran Twitch and Robby Malto figures, along with the blaster accessory, from their packaging. Ensure all components are present. No assembly is required for initial play.

Hướng dẫn sử dụng

Terran Twitch Conversion

The Terran Twitch figure can convert from robot mode to stealth drone mode in 9 steps. Follow the visual cues on the figure to articulate its limbs and body panels into the desired form.

Image: The Terran Twitch figure transformed into its stealth drone mode.

Figure Combination

The Terran Twitch and Robby Malto figures can be combined in two different configurations to create a super-powered Twitch or Robby. Identify the connection points on each figure and securely attach them to form the combined robot.

The set also includes a detachable blaster accessory that can be held by either figure or attached to the combined forms for enhanced play.

Image: A combined form of the figures, holding the detachable blaster accessory.

BẢO TRÌ

To maintain the condition of your figures, wipe them with a soft, dry cloth. For minor dirt, a slightly damp cloth can be used. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish. Store figures in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.

Xử lý sự cố

• Độ khó chuyển đổi: If a figure is difficult to convert, ensure all joints are properly aligned and not obstructed. Do not force parts, as this may cause breakage. Refer to the visual instructions on the packaging for guidance.
• Các bộ phận không kết nối được: When combining figures, ensure the designated connection points are clean and free of debris. Apply gentle, firm pressure to secure the connection.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

For product support or inquiries, please contact the manufacturer, Hasbro. Specific warranty details may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

You can find more information about Transformers products by visiting the official Cửa hàng Transformers.