Tecno KI8

TECNO Spark 10 5G Smartphone User Manual

Model: KI8

1. Giới thiệu

This manual provides essential information for setting up, operating, and maintaining your TECNO Spark 10 5G smartphone. Please read this guide thoroughly to ensure proper use and to maximize the device's capabilities. The TECNO Spark 10 5G is designed for reliable performance, featuring a 5G processor, a high-resolution camera, and a long-lasting battery.

2. Có gì trong hộp

Xác minh rằng tất cả các mặt hàng đều có trong bao bì sản phẩm:

  • TECNO Spark 10 5G Smartphone
  • Bộ đổi nguồn 18W
  • Cáp Type-C
  • TPU Cover
  • Công cụ đẩy SIM

3. Bố cục thiết bị

Đằng trước view of TECNO Spark 10 5G smartphone

Hình 3.1: Đằng trước view of the TECNO Spark 10 5G smartphone, showing the display and front camera.

Mặt sau view of TECNO Spark 10 5G smartphone with camera module

Hình 3.2: Mặt sau view of the TECNO Spark 10 5G smartphone, highlighting the dual rear camera module.

Bên view of TECNO Spark 10 5G smartphone showing power and volume buttons

Hình 3.3: Bên view of the TECNO Spark 10 5G smartphone, illustrating the placement of the power button and volume controls.

Đáy view of TECNO Spark 10 5G smartphone showing ports

Hình 3.4: Đáy view of the TECNO Spark 10 5G smartphone, displaying the USB Type-C port, 3.5mm audio jack, and speaker grille.

4. Thiết lập

4.1. Lắp thẻ SIM và thẻ nhớ SD

  1. Xác định vị trí khay SIM ở bên cạnh thiết bị của bạn.
  2. Insert the provided SIM ejector tool into the small hole on the SIM tray. Press gently until the tray pops out.
  3. Đặt thẻ Nano-SIM và/hoặc thẻ nhớ microSD vào các khe cắm được chỉ định trên khay. Đảm bảo các chân tiếp xúc màu vàng hướng xuống dưới.
  4. Cẩn thận lắp lại khay SIM vào điện thoại cho đến khi nghe thấy tiếng tách.

4.2. Sạc thiết bị

Before first use, fully charge your TECNO Spark 10 5G. Connect the Type-C cable to the phone's charging port (Figure 3.4) and the 18W power adapter. Plug the adapter into a power outlet. The device supports 18W flash charging, allowing for a 50% charge in approximately 50 minutes.

4.3. Bật / Tắt nguồn

  • Để bật nguồn: Press and hold the Power button (Figure 3.3) until the TECNO logo appears.
  • Để Tắt Nguồn: Nhấn và giữ nút Nguồn, sau đó chọn 'Tắt nguồn' từ các tùy chọn trên màn hình.
  • Khởi động lại: Nhấn và giữ nút Nguồn, sau đó chọn 'Khởi động lại' từ các tùy chọn.

4.4. Trình hướng dẫn thiết lập ban đầu

Khi bật nguồn lần đầu, hãy làm theo hướng dẫn trên màn hình để thiết lập các cài đặt cơ bản như ngôn ngữ, kết nối Wi-Fi, tài khoản Google và các tùy chọn bảo mật.

5. Vận hành thiết bị của bạn

5.1. Hiển thị và Điều hướng

The TECNO Spark 10 5G features a 6.56-inch HD+ Perfect Dot display with a 90Hz refresh rate. This provides smoother scrolling and more fluid animations. Navigate the interface using touch gestures: tap to select, swipe to scroll, pinch to zoom.

5.2. Sử dụng máy ảnh

The device is equipped with an Ultra Clear 50MP superior AI rear camera (Figure 3.2). Open the Camera application to access various modes such as Photo, Video, Portrait, and Super Night. The 50MP sensor with F1.6 larger aperture and PDAF (Phase Detection Auto Focus) is designed to capture high-quality images in diverse lighting conditions, including vivid and clear Super Night shots with RAW domain noise reduction algorithm.

5.3. Hiệu suất và lưu trữ

Powered by a 7nm Dimensity 6020 processor with two Arm Cortex-A76 cores clocked at 2.2GHz, the phone offers efficient performance. It includes 4GB of physical RAM, expandable with up to 4GB of customizable memory fusion RAM for enhanced multitasking. The UFS 2.2 internal storage provides up to 64GB of space, further expandable via a dedicated 1TB SD card slot.

5.4. Quản lý pin

The 5000mAh battery provides extended usage, with up to 39 days of standby time. To optimize battery life, manage background applications, reduce screen brightness, and enable power-saving modes when necessary.

5.5. Kết nối

The TECNO Spark 10 5G supports 10 5G bands, Dual 5G Dual active, and Carrier Aggregation for high-speed data connectivity. It also includes 2.4G and 5G Wi-Fi, Bluetooth, and USB connectivity. For audio, a 3.5mm audio jack is available (Figure 3.4).

6. Bảo trì

6.1. Cập nhật phần mềm

Thường xuyên kiểm tra và cài đặt các bản cập nhật phần mềm để đảm bảo thiết bị của bạn có các tính năng, bản vá bảo mật và cải tiến hiệu suất mới nhất. Điều hướng đến Cài đặt > Hệ thống > Cập nhật hệ thống để kiểm tra các bản cập nhật có sẵn.

6.2. Vệ sinh thiết bị của bạn

Use a soft, lint-free cloth to clean the screen and body of your phone. Avoid using harsh chemicals or abrasive materials, which can damage the device's finish. For stubborn smudges, slightly damplau bằng vải với nước hoặc chất tẩy rửa màn hình chuyên dụng cho thiết bị điện tử.

6.3. Chăm sóc pin

To prolong battery lifespan, avoid exposing the device to extreme temperatures. Do not let the battery completely drain frequently. Use only the provided charger and cable for optimal charging performance.

KHAI THÁC. Xử lý sự cố

Nếu bạn gặp sự cố với thiết bị của mình, hãy tham khảo các giải pháp phổ biến sau:

  • Thiết bị không bật nguồn: Đảm bảo pin đã được sạc. Kết nối bộ sạc và đợi vài phút trước khi thử bật lại.
  • Kết nối mạng kém: Check if your SIM card is correctly inserted. Try restarting the device. Verify that mobile data or Wi-Fi is enabled and that you are within network coverage.
  • Ứng dụng bị treo/đóng băng: Close and reopen the application. If the issue persists, clear the app's cache (Settings > Apps > [App Name] > Storage > Clear cache). Restarting the phone can also resolve many software glitches.
  • Âm lượng thấp: Check the volume settings for media, calls, and alarms. Ensure the speaker grille (Figure 3.4) is not obstructed or dirty. If using headphones, ensure they are properly connected.
  • Hiệu suất chậm: Close unnecessary background applications. Clear cached data regularly. Consider uninstalling unused apps to free up storage space.

For persistent issues, consult the official TECNO support resources or contact customer service.

8. Thông số kỹ thuật

Tính năngĐặc điểm kỹ thuật
Số hiệu mẫuKI8
Hệ điều hànhAndroid 13.0
Bộ xử lý7nm Dimensity 6020 (2.2 GHz CPU Speed)
ĐẬP4 GB (Expandable with 4GB Memory Fusion)
Bộ nhớ trong64 GB UFS 2.2 (Expandable up to 1TB via SD card)
Trưng bày6.56-inch HD+ Perfect Dot Display, 90Hz Refresh Rate
Nghị quyết1280 x720
Camera sau50MP Dual Rear Camera (F1.6 Aperture, PDAF)
Ắc quy5000mAh
Sạc18W Flash Charger (Type-C)
Kết nối5G (10 bands), Dual 5G Dual Active, Wi-Fi (2.4G, 5G), Bluetooth, USB
Jack âm thanh3.5mm
Kích thước16.4 x 7.5 x 0.8cm
Cân nặng193 gam
Màu sắcMeta White

9. Bảo hành và Hỗ trợ

9.1. Thông tin bảo hành

The TECNO Spark 10 5G smartphone comes with a Bảo hành 1 năm của nhà sản xuất Kể từ ngày mua. Bảo hành này bao gồm các lỗi sản xuất trong điều kiện sử dụng bình thường. Vui lòng giữ lại hóa đơn mua hàng để yêu cầu bảo hành. Bảo hành không bao gồm các hư hỏng do sử dụng sai cách, tai nạn, sửa chữa trái phép hoặc hao mòn thông thường.

9.2. Chi tiết nhà sản xuất

Nhà sản xuất: G Mobiles India, Ismartu India Private Limited, D-197 and 198, Sector 63, Noida, Gautam Buddha Nagar, Uttar Pradesh 201301

Người nhập khẩu: G-Mobile Devices Private Limited, Unit No. B 301, Third Floor Tower B Plot no 7, Sec - 142, Noida, Uttar Pradesh PIN - 201301

9.3. Hỗ trợ khách hàng

For further assistance, technical support, or warranty claims, please refer to the official TECNO webtrang web hoặc liên hệ với dịch vụ khách hàng của họ. Bạn cũng có thể truy cập Cửa hàng Tecno trên Amazon để biết thêm thông tin về sản phẩm và tài nguyên hỗ trợ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.