Hướng dẫn sử dụng máy hút sữa đeo tay rảnh tay Momcozy M6

1. Thông tin an toàn quan trọng

Cảnh báo: Do NOT use this device if you have a cardiac pacemaker, implanted defibrillator, or any other metallic or electronic implant, as it may cause electromagnetic interference or serious injury.

Tuyên bố miễn trừ trách nhiệm: Các tuyên bố liên quan đến thực phẩm bổ sung chưa được FDA đánh giá và không nhằm mục đích chẩn đoán, điều trị, chữa khỏi hoặc ngăn ngừa bất kỳ bệnh tật hoặc tình trạng sức khỏe nào.

2. Sản phẩm hếtview

The Momcozy M6 Hands-Free Wearable Breast Pump is designed for discreet and efficient milk expression. It features a 2nd Gen motor for strong suction, 3 modes, and 9 adjustable levels to optimize comfort and milk production. The DoubleFit Flange ensures a secure and comfortable fit, while the stand-up milk collector simplifies pouring. The pump is designed for easy cleaning with only 4 parts.

Các tính năng chính:

• Ideal Rhythm: Optimized pumping rhythm for enhanced comfort and increased milk production.
• Lực hút mạnh mẽ: Advanced 2nd Gen motor with 295 mmHg suction.
• Nhiều chế độ và cấp độ: 3 modes (Stimulation, Expression, Mixed) and 9 adjustable levels.
• Thiết kế kín đáo: Contours to breast shape for seamless fit within a bra.
• DoubleFit Flange: Soft and hard silicone dual-seal for comfort and safety.
• Stand-Up Milk Collector: Simplifies milk transfer without spills.
• Phù hợp tùy chỉnh: Available in 4 sizes (17/19/21/24mm) for personalized comfort.
• Pin sử dụng lâu dài: Up to 180 minutes (6 sessions) on one charge.
• Màn hình thân thiện với người dùng: Large LED display shows time, battery, and intensity.
• Bảo trì dễ dàng: Only 4 easy-to-clean parts.

3. Thành phần sản phẩm

The Momcozy M6 Breast Pump consists of the following main components:

• Động cơ bơm: The main unit that generates suction and houses controls.
• Flange (24mm): Phần tiếp xúc với vú.
• Flange Inserts (17/19/21mm): For personalized nipple sizing.
• Người thu gom sữa: Gathers expressed milk.
• Flange Cover: Protects the flange.
• Cơ hoành: Prevents backflow of milk.
• Silicone Valve: Directs milk flow into the collector.
• Cáp USB Type-C: For charging the pump.
• Trường hợp thiếu thốn: Thuận tiện cho việc vận chuyển và bảo quản.

Hình ảnh: Chi tiết view of all components included in the Momcozy M6 two-pack box, showing pump motors, flanges, milk collectors, covers, diaphragms, valves, flange inserts, USB cables, user manual, flange size ruler, operating instructions, and storage case.

4. Thiết lập và lắp ráp

Before first use, sterilize all pump parts that come into contact with breast milk (flange, milk collector, flange cover, diaphragm, silicone valve) according to the cleaning instructions.

Các bước lắp ráp:

1. Insert the silicone valve firmly into the bottom of the milk collector. Ensure it is securely seated to prevent leaks.
2. Place the diaphragm onto the top of the milk collector, ensuring a tight seal.
3. Attach the flange (with any necessary insert) to the milk collector, aligning the pouring spout with the groove. Ensure the lip of the flange is securely over the edge of the collector.
4. Connect the pump motor to the assembled flange and collector unit. Ensure the electrical contacts align and the motor clicks securely into place.

Flange Sizing:

Correct flange sizing is crucial for comfort and effective pumping. Use the provided nipple measurement card to determine your size. If your nipple diameter requires a size smaller than 24mm, use the appropriate flange insert (17/19/21mm) with the 24mm flange.

Image: Nipple Measurement Card to help determine the correct flange or insert size for optimal pumping.

5. Hướng dẫn vận hành

The Momcozy M6 pump features an LED display and intuitive controls for easy operation.

Bảng điều khiển:

Image: Diagram of the pump motor's control panel, indicating running time/suction level display, battery display, On/Off/Pause button, Mode Selection button, Increase button, Decrease button, and Milk Outlet.

Modes and Levels:

The pump offers 3 modes and 9 adjustable suction levels:

• Chế độ kích thích: Quick and short sucking pattern to initiate milk flow.
• Chế độ biểu hiện: Slow sucking pattern for efficient milk expression.
• Chế độ hỗn hợp: Combines quick and short sucking with a slow and long sucking pattern.

Image: Visual representation of the 3 modes (Stimulation, Expression, Mixed) and 9 suction levels of the Momcozy M6 pump.

Bật/Tắt nguồn:

• Press and hold the Power button to turn the pump On or Off.
• A short press of the Power button will pause or resume pumping.

Điều chỉnh cài đặt:

• Use the Mode Selection button to switch between Stimulation, Expression, and Mixed modes.
• Use the Increase (+) and Decrease (-) buttons to adjust the suction level (1-9) within each mode.
• It is recommended to start with a lower suction level and gradually increase to a comfortable setting that provides effective milk expression.

6. Bảo trì và vệ sinh

Proper cleaning and maintenance are essential for hygiene and optimal pump performance. The Momcozy M6 is designed with only 4 easy-to-clean parts.

Hướng dẫn vệ sinh:

1. Disassemble all pump parts that come into contact with breast milk (flange, milk collector, flange cover, diaphragm, silicone valve).
2. Wash these parts with warm soapy water.
3. Rửa sạch lại bằng nước sạch.
4. Air dry completely on a clean surface or use a dedicated drying rack.
5. The pump motor should NOT be washed or submerged in water. Wipe it clean with a damp vải nếu cần thiết.

Khử trùng:

Sterilize all milk-contacting parts at least once a day. These parts are dishwasher safe and can be sterilized in a cooking pot (boiling water) or a steam sterilizer. Do NOT use a microwave for sterilization.

Image: The four main parts of the Momcozy M6 pump shown disassembled and submerged in water, highlighting their easy-to-clean design.

KHAI THÁC. Xử lý sự cố

• Lực hút thấp: Ensure all pump parts are correctly assembled and securely sealed. Check that the silicone valve and diaphragm are not damaged or worn.
• Không có điện: Check the battery indicator on the LED display. Recharge the pump using the provided USB Type-C cable if the battery is low.
• Khó chịu/Đau đớn: Verify that you are using the correct flange size. Refer to the nipple measurement card. Adjust suction levels to a comfortable setting. If discomfort persists, consult a lactation professional.
• Sữa bị rò rỉ: Ensure all parts are correctly assembled and tightly sealed. Check for any cracks or damage to the milk collector or flange.
• Máy bơm không bật: Ensure the pump is fully charged. Press and hold the power button for a few seconds.

8. Thông số kỹ thuật

• Kích thước sản phẩm: 2 x 3 x 3 inch
• Trọng lượng sản phẩm: 3.15 Bảng Anh
• Số hiệu sản phẩm: BP311
• Nhà sản xuất: Mẹ ấm cúng
• Tính năng đặc biệt: Cầm tay
• Số lượng mặt hàng: 1 (per pump unit, product is a 2-pack)
• Màu sắc: Cozy Red
• Kích cỡ: 2 Count (referring to the pack quantity)

9. Bảo hành và Hỗ trợ

For warranty information, please refer to the warranty card included in your product packaging or visit the official Momcozy website. For customer support, troubleshooting assistance, or to order replacement parts, please contact Momcozy customer service through their official channels.