GreenYi AHD Monitor Camera System User Manual

1. Giới thiệu

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GreenYi AHD Monitor Camera System. This system includes a 5-inch AHD TFT LCD monitor and a universal 720P camera, designed to enhance vehicle safety by providing clear visual assistance for rear, front, or side viewVui lòng đọc kỹ hướng dẫn sử dụng này trước khi lắp đặt và vận hành để đảm bảo chức năng hoạt động đúng cách và an toàn.

2. Thông tin an toàn

Observe the following safety precautions to prevent damage to the product and ensure safe operation:

• Ensure all power connections are secure and correctly polarized to avoid electrical shorts.
• Disconnect the vehicle's battery before performing any wiring to prevent electrical hazards.
• Không được cản trở tầm nhìn của người lái xe. view hoặc gây cản trở hệ thống điều khiển xe trong quá trình lắp đặt.
• Avoid installing the monitor or camera in locations exposed to extreme temperatures or direct sunlight for prolonged periods.
• This system is an aid to driving and does not replace the driver's responsibility for safe operation and awareness of surroundings.

3. Nội dung gói hàng

Xác minh rằng tất cả các mục được liệt kê dưới đây đều có trong gói hàng của bạn:

Hình 3.1: Quaview của tất cả các thành phần được bao gồm.

Monitor Package:

• 1 x 5-inch AHD 800x480 Car TFT LCD Monitor
• 1 x Bộ chuyển đổi nguồn tẩu thuốc lá
• 1 x Dashboard Mounting Bracket
• 1 x Windshield Suction Cup Mounting Bracket
• 1 x 5FT Power Cable (for monitor)
• 1 x User Manual (for monitor)
• 1 x RCA Video Coupler

Camera Package:

• 1 x HD 720P Backup Camera
• 1 x 26FT Double Shielded Video Cable
• 1 x 5FT Power Cable (for camera)
• 1 x Metal Holder set
• 1 x Accessory Bag for Metal Holder
• 1 x Silicone Holder
• 1 x Accessory Bag for Silicone Holder
• 1 x User Manual (for camera)
• 1 x Băng dính
• 1 x Removal Tool
• 5 x Cà vạt khóa kéo
• 5 x Wire Clamps
• 1 x Tuốc nơ vít mini
• 1 x RCA Male to Male Coupler
• 1 x RCA Female to Female Coupler
• 1 x Electric Adhesive Tape
• 2 x T-tap Sets

4. Thông số kỹ thuật sản phẩm

Thông số kỹ thuật màn hình:

Thông số kỹ thuật của máy ảnh:

5. Thiết lập & Cài đặt

5.1 Cài đặt màn hình

The monitor can be installed using either the dashboard mounting bracket or the windshield suction cup mounting bracket.

1. Chọn Vị trí: Select a location on your dashboard or windshield that does not obstruct your view hoặc can thiệp vào điều khiển phương tiện.
2. Đính kèm giá đỡ:
   • For dashboard mount: Secure the dashboard bracket to the desired surface using the adhesive pad or screws (not included).
   • For suction cup mount: Press the suction cup firmly against a clean, smooth windshield surface and engage the locking lever.
3. Gắn màn hình: Attach the monitor to the chosen bracket. Adjust the angle for optimal viewđang.
4. Kết nối nguồn điện: Connect the monitor's power cable to the cigarette lighter adapter or directly to a 12-30V DC power source in your vehicle.

Hình 5.1: Monitor and camera components.

5.2 Cài đặt Camera

The camera offers versatile installation options for front, rear, or side views. Use the provided metal or silicone holders.

Hình 5.2: Examples of camera installation positions.

1. Select Mounting Position: Choose a suitable location (e.g., license plate area for rear view, grille for front view, under side mirror for side view).
2. Gắn giá đỡ: Secure the metal or silicone holder to the chosen surface using screws or adhesive tape.
3. Gắn Camera: Insert the camera into the holder.
4. Điều chỉnh góc: Use the mini screwdriver to adjust the camera's lens angle (360-degree rotatable body) for the desired viewquan điểm.
   

   Hình 5.3: Camera angle adjustment.

5.3 Sơ đồ đấu dây

Follow the wiring diagram carefully to connect the camera to the monitor and vehicle power supply.

Hình 5.4: Wiring connections for the camera system.

• Connect the 4-pin camera cable to the provided 26FT Double Shielded Video Cable.
• Connect the video cable's RCA end to the monitor's video input. The yellow plug is typically for the rear view máy ảnh.
• Connect the camera's 5FT power cable:
  • Dây màu đỏ: Connect to a 12-24V DC power source (e.g., reversing light positive, brake light positive, turning light positive, or ACC).
  • Dây đen: Connect to vehicle ground (GND).
• If connecting to a head unit with a trigger wire, connect the trigger wire (usually labeled "Reverse" or "Back") from the head unit to the reversing light positive.
• Ensure all connections are secure and insulated using the provided electrical adhesive tape and zip ties.

Ghi chú: All 4-pin cameras require the use of the provided power cable for connection to any monitor.

6. Hoạt động

6.1 Vận hành màn hình

The monitor will automatically power on and display the camera feed when the connected power source (e.g., reverse gear) is activated.

Hình 6.1: Monitor rear view with menu controls.

Use the buttons on the back of the monitor to access and adjust settings:

• Nút Menu: Press to enter the menu and navigate through options.
• Các nút Lên / Xuống: Use to adjust values or select menu items.
• Cài đặt có sẵn: Brightness, Contrast, Saturation, Tint, Language, Mode, Reset.

6.2 Tính năng của máy ảnh

The camera offers customizable features via switcher cables:

Hình 6.2: Camera feature switcher cables.

• Cáp trắng: Cut this cable to switch between mirror (rear view, default) and non-mirror (front view) image display.
• Orange Cable: Cut this cable to switch between CVBS and AHD video signal output. Ensure this matches your monitor's input capability.
• Green Cable: Cut this cable to toggle parking guidelines ON or OFF.

Ghi chú: Perform these cable modifications before final installation and power connection.

Hình 6.3: Camera fisheye lens with 170-degree viewgóc ing.

The camera features a 170-degree wide viewing angle fisheye lens, designed to cover a broad area and minimize blind spots.

7. Bảo trì

• Vệ sinh: Sử dụng một mềm, damp Dùng khăn mềm để lau màn hình và ống kính máy ảnh. Tránh sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi.
• Kiểm tra cáp: Periodically check all cables and connections for wear, damage, or loose contacts.
• Độ rõ của ống kính: Ensure the camera lens remains free of dirt, mud, snow, or ice to maintain clear image quality.
• Lắp đặt an ninh: Verify that the monitor and camera mounts are secure and have not loosened over time due to vehicle vibrations.

KHAI THÁC. Xử lý sự cố

9. Bảo hành & Hỗ trợ

For warranty information and technical support, please refer to the specific warranty card included in your product package or contact GreenYi customer service directly. Keep your purchase receipt as proof of purchase.

Thông tin liên lạc: Please visit the official GreenYi website or refer to the contact details provided in your product packaging for support.