1. Sản phẩm hếtview
The realme Buds Air 2 are True Wireless Stereo (TWS) in-ear earbuds designed for an enhanced audio experience. They feature Active Noise Cancellation (ANC), Bluetooth 5.2 connectivity, and a long-lasting battery. This manual provides instructions for setup, operation, and maintenance of your earbuds.

Image: realme Buds Air 2 earbuds in their charging case, presented in a gold color variant.
2. Có gì trong hộp
Khi mở bao bì sản phẩm, bạn sẽ thấy những mục sau:
- realme Buds Air 2 Earbuds (Left and Right)
- Vỏ sạc
- Cáp sạc USB Type-C
- Nhiều kích cỡ nút tai (S, M, L)
- Hướng dẫn sử dụng (Tài liệu này)
3. Hướng dẫn thiết lập
3.1. Sạc ban đầu
Before first use, fully charge the realme Buds Air 2. Place both earbuds into the charging case and connect the charging case to a power source using the provided USB Type-C cable. The indicator light on the case will show charging status.
3.2. Ghép nối với thiết bị
- Hãy đảm bảo tai nghe nằm trong hộp sạc và nắp hộp đang mở.
- Press and hold the function button on the charging case for 2-3 seconds until the indicator light flashes white, indicating pairing mode.
- On your smartphone or Bluetooth-enabled device, go to Bluetooth settings and search for 'realme Buds Air 2'.
- Select 'realme Buds Air 2' to connect. Once connected, the indicator light will turn solid white.
For subsequent connections, the earbuds will automatically connect to the last paired device when taken out of the case.
4. Hướng dẫn vận hành
4.1. Điều khiển cảm ứng
The realme Buds Air 2 feature intelligent touch controls on each earbud. The default controls are:
- Nhấn đúp: Phát/Tạm dừng nhạc, Trả lời/Kết thúc cuộc gọi.
- Nhấn ba lần: Bài hát tiếp theo.
- Press and hold one earbud: Switch between Noise Cancellation modes (ANC On/Transparency/Normal).
- Nhấn và giữ cả hai tai nghe: Enter/Exit Gaming Mode.
These controls can be customized via the realme Link app.
4.2. Khử tiếng ồn chủ động (ANC)
The earbuds offer Active Noise Cancellation up to 25dB, reducing ambient noise for an immersive listening experience. To activate or switch ANC modes, press and hold one earbud. The available modes are ANC On, Transparency Mode (allows you to hear your surroundings), and Normal Mode (ANC off).
Image: Illustration of Active Noise Cancellation waves around a realme Buds Air 2 earbud.
4.3. Chế độ chơi game
For an optimized gaming experience, activate Gaming Mode. This mode reduces audio latency to approximately 88ms, ensuring better synchronization between audio and video. To toggle Gaming Mode, press and hold both earbuds simultaneously.
Image: realme Buds Air 2 earbuds shown with a smartphone displaying a game, highlighting 88ms super low latency.
4.4. Phát hiện thiết bị đeo thông minh
The earbuds are equipped with smart wear detection. Music playback will automatically pause when you remove an earbud and resume when you put it back in.
Image: A person wearing realme Buds Air 2, illustrating the smart wear detection feature.
4.5. Cuộc gọi
The dual microphone environment noise cancellation feature helps ensure clear calls by reducing background noise.
5. Bảo trì
5.1. Vệ sinh
Thường xuyên vệ sinh tai nghe và hộp sạc bằng vải mềm, khô. Tránh sử dụng hóa chất mạnh hoặc vật liệu mài mòn. Đảm bảo các điểm tiếp xúc sạc trên cả tai nghe và hộp sạc đều không bị bám bụi bẩn.
5.2. Khả năng chống nước
The realme Buds Air 2 are IPX5 water resistant, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for workouts and light rain. However, they are not designed for swimming or submersion in water.
KHAI THÁC. Xử lý sự cố
- Tai nghe không ghép nối được: Ensure both earbuds are in the charging case, the lid is open, and the case has sufficient charge. Press and hold the function button until the indicator flashes white. If issues persist, try resetting the earbuds (refer to the realme Link app or online support for specific reset instructions).
- Không có âm thanh từ một bên tai nghe: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again. If the problem continues, try re-pairing the earbuds.
- Vấn đề sạc: Check if the charging cable is securely connected to both the case and the power source. Ensure the charging contacts on the earbuds and case are clean.
- Chất lượng âm thanh kém: Ensure the eartips provide a snug fit. Try different sizes of eartips for optimal seal. Check if the earbuds are clean and free from debris.
7. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Tên mẫu | realme Buds Air 2 |
| Số hiệu mẫu | RMA2003 |
| Kết nối | Bluetooth v5.2 |
| Wireless Dải | Lên đến 10 mét |
| Kiểm soát tiếng ồn | Khử tiếng ồn chủ động (lên đến 25dB) |
| Kích thước trình điều khiển | 10mm Diamond-class Hi-Fi Sound Driver |
| Total Playback | Lên đến 25 giờ (với hộp sạc) |
| Sạc nhanh | Sạc 10 phút cho 120 phút phát nhạc. |
| Chống nước | IPX5 |
| Độ trễ | 88ms (Chế độ chơi game) |
| Micrô | Dual Mic Environment Noise Cancellation for Calls |
| Cân nặng | 43 grams (earbuds + case) |
Image: An infographic summarizing the key features of the realme Buds Air 2, including ANC, battery life, driver size, and water resistance.
8. Bảo hành và Hỗ trợ
The realme Buds Air 2 come with a standard brand warranty. For detailed information regarding warranty terms, service centers, or to register your product, please refer to the official realme webtrang web hoặc thẻ bảo hành có trong bao bì sản phẩm của bạn.
For further assistance, you may contact realme customer support through their official channels.