ATOMSTACK P9 M50 10W Laser Engraver User Manual

1. Thông tin an toàn

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury. Always read and understand all safety instructions before use.

Bảo vệ mắt

The ATOMSTACK P9 M50 features a panoramic filter glass protective cover designed to filter 97% of ultraviolet light. This allows you and those nearby to observe the laser engraving process without needing additional protective eyewear. However, it is always recommended to exercise caution and avoid direct eye exposure to the laser beam.

Image: The panoramic filter glass effectively blocks laser light, protecting your eyes during operation.

Emergency Controls

The machine is equipped with an independent operation terminal that includes essential safety buttons:

• Nút dừng khẩn cấp: Immediately halts all machine operations. To restart, turn the button in the indicated direction to unlock it.
• Shutdown Button: Terminates the current operation and cuts off all power to the machine.
• Nút Đặt lại: Stops the current operation, closes the control terminal, and restarts the system.

Image: The independent control terminal showing the Emergency Stop, Shutdown, and Reset buttons for safe operation.

Biện pháp phòng ngừa an toàn chung

• Always operate the laser engraver in a well-ventilated area to dissipate fumes and smoke.
• Để bình chữa cháy ở gần.
• Không để máy không có người giám sát trong quá trình vận hành.
• Đảm bảo khu vực làm việc không có vật liệu dễ cháy.
• Giữ trẻ em và vật nuôi tránh xa máy đang hoạt động.

2. Thành phần sản phẩm

The ATOMSTACK P9 M50 Laser Engraver comes with several key components designed for efficient and precise engraving and cutting.

Hình ảnh: Trênview of the ATOMSTACK P9 M50 Laser Engraver, highlighting its main features including the 10W laser power and eye protection.

Thành phần chính

• Laser Engraver Unit: The primary frame and moving parts that house the laser module.
• Mô-đun laze: The 10W fixed-focus laser with an ultra-fine spot size of 0.06 x 0.06 mm.
• Independent Control Terminal: A separate unit for offline operation, featuring a touch screen and control buttons.
• Support Blocks: Four adjustable blocks to increase the machine's height for specific engraving tasks or when using a rotary roller.

Image: The Atomstack P9 M50 Independent Control Terminal, enabling offline engraving and touch operation.

Image: The four included support blocks, used to elevate the machine for various engraving and cutting applications.

3. Thiết lập

Follow these steps to assemble and prepare your ATOMSTACK P9 M50 Laser Engraver for its first use.

Cuộc họp

The P9 M50 features a fully modular design for quick and easy assembly. Most users can complete the assembly process within 10-20 minutes. Ensure all components are securely fastened according to the detailed instructions provided in the separate assembly guide.

The four support blocks can be used to increase the machine's height, which is beneficial for engraving larger objects or when integrating a rotary roller for cylindrical items. Using three auxiliary installations ensures the X-axis and Y-axis maintain a horizontal plane for ideal engraving results.

Cài đặt phần mềm

The ATOMSTACK P9 M50 is compatible with various mature engraving software, including LaserGRBL (free) and LightBurn (paid, with a trial period). These software options support multiple operating systems:

• Cửa sổ: Compatible with Win XP, Win 7, Win 8, Win 10.
• Máy Mac: Supported by LightBurn.

Được hỗ trợ file Các định dạng bao gồm NC, BMP, JPG, PNG và DXF.

Image: The laser engraver connected to a computer running LaserGRBL or LightBurn software, demonstrating software compatibility.

4. Hoạt động

The ATOMSTACK P9 M50 offers flexible operation modes for your engraving and cutting projects.

Hoạt động ngoại tuyến

The independent control terminal allows you to operate the engraver without connecting it to a computer. This provides convenience and portability for your projects.

Quy trình khắc và cắt

The enhanced dual compression spot technology reduces the laser focus area to an ultra-fine 0.06 x 0.06 mm. With a 10W laser output, the machine can efficiently cut through materials such as 20mm thick wood and 15mm thick acrylic. It can also directly engrave on mirror stainless steel, ceramics, and glass. The engraving and cutting speed is up to 40% higher than common laser engravers.

Image: The ATOMSTACK P9 M50 demonstrating its capability to cut 20mm thick wood with precision, resulting in smooth edges.

Achieving Fine Details

The ultra-fine laser spot enables high-resolution image engraving, capturing intricate details in your designs.

Image: A detailed tiger portrait engraved on wood, illustrating the precision achieved with the ultra-fine laser spot.

Khắc Examptập

Image: A collection of diverse projects, including engravings on wood, leather, and metal, demonstrating the versatility of the ATOMSTACK P9 M50.

Video Demonstration (Not Available)

No official product videos with 'Seller' creator type and m3u8 format were found in the provided data. Therefore, no video demonstration can be embedded at this time.

5. Bảo trì

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P9 M50 Laser Engraver.

Cleaning the Laser Lens

• Periodically inspect the laser lens for dust, debris, or residue.
• Use a soft, lint-free cloth and a small amount of lens cleaning solution (specifically designed for optical lenses) to gently wipe the lens.
• Avoid using abrasive materials or excessive force, as this can scratch or damage the lens.

Vệ sinh thân máy

• Wipe down the machine's frame and surfaces with a damp cloth to remove dust and engraving residue.
• Ensure the machine is powered off and unplugged before cleaning.

Bôi trơn

• Occasionally apply a small amount of lubricant to the guide rails and moving parts to ensure smooth operation. Refer to the full product manual for specific lubrication points and recommended lubricants.

KHAI THÁC. Xử lý sự cố

This section provides solutions to common issues you might encounter with your ATOMSTACK P9 M50 Laser Engraver.

Các vấn đề thường gặp và giải pháp

• Máy không bật nguồn: Check all power connections. Ensure the power adapter is securely plugged into both the machine and a working electrical outlet.
• Tia laser không hoạt động: Verify that the laser module is correctly installed and connected. Check software settings to ensure the laser power is not set to zero.
• Engraving/Cutting quality is poor:
  • Ensure the material is properly focused. The P9 M50 has a fixed focus, so ensure the material is at the correct distance from the laser head.
  • Adjust laser power and speed settings in your software for the specific material being used.
  • Nếu thấy ống kính laser bị bẩn, hãy lau sạch.
• Machine not connecting to software:
  • Đảm bảo cáp USB được kết nối chắc chắn.
  • Install the correct drivers for your operating system.
  • Khởi động lại cả máy và máy tính của bạn.

If you encounter any persistent issues that cannot be resolved using these tips, please contact our professional after-sales engineering team for assistance.

7. Thông số kỹ thuật

8. Bảo hành & Hỗ trợ

Thông tin bảo hành

Please refer to the official ATOMSTACK website or your purchase documentation for detailed warranty terms and conditions. Warranty coverage typically includes manufacturing defects and component failures under normal use.

Hỗ trợ khách hàng

For any technical issues, operational questions, or warranty claims, our professional after-sales engineering team is available to provide support. You can reach them through the contact information provided on the ATOMSTACK official webtrang web hoặc các kênh hỗ trợ của nhà bán lẻ.

When contacting support, please have your product model (P9 M50) and a detailed description of the issue ready to facilitate a quicker resolution.