XINMENG Z1 Phone Cooler
Hướng dẫn sử dụng bộ tản nhiệt điện thoại di động XINMENG
Model: Z1 Phone Cooler
Giới thiệu
Cảm ơn bạn đã muaasing the XINMENG Mobile Phone Radiator. This portable phone fan and heatsink is designed to provide fast cooling for your mobile device, enhancing performance during gaming, video watching, and other demanding tasks. Its compact and quiet design makes it an ideal accessory for all types of cell phones with widths ranging from 2.63 to 3.46 inches.
Thông tin an toàn quan trọng
Vui lòng đọc kỹ tất cả hướng dẫn an toàn trước khi sử dụng.
- When the radiator is operating, it is normal for water droplets to condense on the surface of the thermally conductive silicone pad. This is a result of the cooling process and does not indicate a malfunction.
- After connecting the power supply, do not leave the power supply unnecessarily. Always disconnect the power when not in use or when leaving the device unattended for extended periods.
- Since this device has a built-in ceramic semiconductor, avoid high temperatures. Choose a place with low humidity and temperature for storage and operation.
- Do not subject the device to strong impacts or drops, as this may damage the internal components, especially the ceramic semiconductor.
Nội dung gói
Vui lòng kiểm tra xem có đầy đủ các mục trong gói hàng của bạn không:
- XINMENG Mobile Phone Radiator (Z1 Phone Cooler)
- USB Data Cable (approximately 1.5 meters)
- Hướng dẫn sử dụng (tài liệu này)
Hướng dẫn thiết lập
- Giải nén thiết bị: Carefully remove the XINMENG Mobile Phone Radiator and its accessories from the packaging.
- Gắn vào điện thoại: The cooler features a retractable back clip. Gently extend the clip and attach it to your mobile phone. Ensure your phone's width is between 2.63 and 3.46 inches (67-89 mm) for a secure fit. The cooling pad should be centered on the back of your phone for optimal heat dissipation.
Image: The XINMENG Mobile Phone Radiator securely attached to the back of a smartphone, demonstrating its compact design and how it clips onto the device. The fan with RGB lighting is visible.
- Kết nối nguồn: Connect the provided 1.5m USB data cable to the cooler's USB port. Plug the other end of the USB cable into a 5V USB power source (e.g., a wall adapter, power bank, or computer USB port). The cooler will automatically turn on and begin cooling upon power connection.
Hình ảnh: Một chi tiết view of the cooler's retractable buckle design and the USB power input, highlighting its ease of use and universal compatibility.
Hướng dẫn sử dụng
The XINMENG Mobile Phone Radiator is designed for simple, plug-and-play operation.
- Làm mát tự động: Once connected to a 5V power source, the cooler will immediately activate its cooling fan and ceramic semiconductor, rapidly reducing your phone's temperature.
- Tản nhiệt hiệu quả: The cooler is capable of reducing phone temperature by 9-25°C within a short period, preventing overheating during intensive use.
Image: A visual comparison illustrating the effectiveness of the cooler, showing a phone's temperature at 53.7°C without the cooler versus 25.7°C with the cooler after 30 minutes of gaming.
- Hoạt động yên tĩnh: The cooler features a noise reduction design, ensuring a quiet environment for gaming, watching videos, or making calls.
- Đèn RGB: The integrated RGB LED lights illuminate the fan blades, providing a dynamic and immersive e-sports atmosphere during use. The lights cycle through various colors including red, green, blue, purple, yellow, and rainbow.
BẢO TRÌ
To ensure the longevity and optimal performance of your XINMENG Mobile Phone Radiator, follow these maintenance guidelines:
- Vệ sinh: Use a soft, dry cloth to wipe down the exterior of the cooler. Do not use liquid cleaners or abrasive materials.
- Loại bỏ bụi: Periodically check the fan blades and vents for dust accumulation. Use a can of compressed air or a soft brush to gently remove any dust to maintain airflow.
- Kho: Khi không sử dụng, hãy bảo quản thùng giữ nhiệt ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ quá cao hoặc quá thấp.
- Xử lý cẩn thận: Tránh làm rơi thiết bị hoặc để thiết bị chịu những va đập mạnh, vì điều này có thể làm hỏng các bộ phận bên trong.
Xử lý sự cố
If you encounter any issues with your XINMENG Mobile Phone Radiator, please refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Cooler does not turn on. | Không có kết nối nguồn điện hoặc nguồn điện không đủ. | Ensure the USB cable is securely connected to both the cooler and a 5V power source. Try a different USB port or power adapter. |
| Hiệu suất làm mát kém. | Improper placement, dust accumulation, or phone case interference. | Ensure the cooler's cooling pad is centered on the phone's back. Clean any dust from the fan and vents. Remove thick phone cases that might hinder heat transfer. |
| Water droplets on cooling pad. | Normal condensation due to cooling process. | This is normal and expected. Wipe away any excess moisture with a dry cloth if desired. |
| Cooler does not fit phone. | Phone width outside compatible range. | Verify your phone's width is between 2.63 - 3.46 inches (67 - 89 mm). The cooler is not designed for devices outside this range. |
Thông số kỹ thuật
| Thương hiệu | Tân Mông |
| Người mẫu | Z1 Phone Cooler |
| Chiều rộng điện thoại tương thích | 2.63 - 3.46 inch (67 - 89 mm) |
| Đầu vào nguồn điện | 5 Volts (cấp nguồn qua USB) |
| Công nghệ làm mát | Ceramic Semiconductor, Turbo Fan |
| Cân nặng | 4.6 ounce (khoảng 130g) |
| Chiều dài cáp | 1.5 mét |
| Đặc trưng | Quiet Operation, RGB LED Lighting, Retractable Clip |
Image: A diagram illustrating the product dimensions and available colors (Black and White) of the XINMENG Mobile Phone Radiator.
Bảo hành và Hỗ trợ
For warranty information and technical support, please contact XINMENG customer service through the retailer where you purchased the product or visit the official XINMENG store page on Amazon:
Visit the XINMENG Store on Amazon
Please have your purchase receipt and product model information (Z1 Phone Cooler) ready when contacting support.