sofirn SP36

Sofirn SP36 Pro Flashlight Instruction Manual

Kiểu: SP36

Giới thiệu

Thank you for choosing the Sofirn SP36 Pro, a high-performance, super bright flashlight designed for various lighting needs. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your device to ensure optimal performance and longevity.

Sofirn SP36 Pro Flashlight

The Sofirn SP36 Pro, a compact and powerful flashlight.

Nội dung gói

Vui lòng kiểm tra xem có đầy đủ các mục trong gói hàng của bạn không:

  • 1 x Sofirn SP36 Pro Flashlight
  • 3 x 18650 Batteries (pre-inserted)
  • 1 x Cáp sạc USB-A sang USB-C
  • 1 x Hướng dẫn sử dụng
  • 2 x Vòng chữ O dự phòng

Tính năng sản phẩm

  • Đầu ra siêu sáng: Equipped with SS-T40 5000K LED, delivering up to 8000 Lumens and a maximum beam distance of 450 meters.
  • Sofirn SP36 Pro showing 8000 lumens output and 450 meters beam range

    The flashlight illuminates a wide area with its powerful 8000 lumen output.

  • Anduril 2.0 Programmable UI: Features a remarkable user interface with multiple light modes to suit various scenarios.
  • Onboard USB-C Charging: Built-in USB-C charging port allows for convenient and fast recharging via computer or car charger.
  • Sofirn SP36 Pro connected to a power bank via USB-C cable, indicating charging status

    The flashlight features a convenient USB-C charging port for easy power replenishment.

  • Compact & Tough Design: With a 50mm head and 126.7mm length, weighing 300g (without batteries), its soda can-shaped design offers a comfortable grip. Constructed with durable Aluminum shell and IPX8 waterproof rating.
  • Sofirn SP36 Pro submerged in water, highlighting its IPX8 waterproof rating

    The IPX8 waterproof rating ensures durability in wet conditions.

Thiết lập và sử dụng lần đầu

  1. Lắp đặt pin: The flashlight comes with batteries pre-inserted. Before first use, unscrew the tail cap and remove the small piece of insulating paper located between the battery and the contact point. Ensure the batteries are correctly oriented (positive end towards the head).
  2. Mức phí ban đầu: It is recommended to fully charge the flashlight before its first use. Connect the provided USB-C cable to the flashlight's charging port and a compatible USB power source. The indicator light on the button will show charging status.
  3. Hiệu chuẩn nhiệt độ: For maximum output and accurate thermal regulation, perform temperature calibration as per the Anduril 2.0 UI instructions (refer to the Operating Instructions section or the included manual for detailed steps).

Hướng dẫn vận hành (Giao diện người dùng Anduril 2.0)

The Sofirn SP36 Pro utilizes the advanced Anduril 2.0 user interface, offering both a Simple UI and an Advanced UI. The flashlight typically ships in Simple UI mode.

Thao tác cơ bản (Giao diện người dùng đơn giản)

  • Bật/Tắt: Single click the side button to turn the flashlight on or off.
  • Stepless Ramptrong: When ON, press and hold the button to smoothly increase or decrease brightness. Release the button at your desired brightness level.
  • Sofirn SP36 Pro showing various lumen outputs from 7LM to 8000LM

    The flashlight offers a wide range of brightness levels, from a dim 7 lumens to a powerful 8000 lumens.

  • Chế độ Turbo: From ON, double-click and hold to jump directly to Turbo mode. Release to return to the previous brightness.
  • Firefly/Moonlight Mode: From OFF, press and hold the button for a very low output, ideal for discreet lighting.
  • Bộ nhớ chế độ: The flashlight will remember the last used brightness level (except for Turbo and Firefly/Moonlight) when turned off and back on.

Advanced Features (Advanced UI)

To access the full range of Anduril 2.0 features, switch to Advanced UI. This includes stepped ramping, special modes (strobe, beacon, lightning), and battery voltage kiểm tra.

  • Switching UI: From ON, 10 clicks and hold on the 10th click to switch between Simple UI and Advanced UI.
  • Pin Voltage Kiểm tra: From OFF, 3 clicks to blink out the battery voltage (e.g., 4 blinks, pause, 1 blink for 4.1V).

For a complete guide to all Anduril 2.0 features, please refer to the detailed instructions in the included manual or online resources for Anduril 2.0 UI.

Sạc

The Sofirn SP36 Pro features a built-in USB-C charging port, allowing you to charge the included 18650 batteries directly within the flashlight. This eliminates the need for an external charger.

  • Quy trình sạc: Open the rubber cover on the side of the flashlight to reveal the USB-C port. Insert the provided USB-A to USB-C cable into the port and connect the other end to a USB power source (e.g., wall adapter, power bank, computer USB port).
  • Đèn báo sạc: The power button will illuminate to indicate charging status. Typically, a flashing blue light indicates charging, and a solid blue light indicates a full charge.
  • Thời gian sạc: A full charge for the three 18650 batteries typically takes approximately 5 hours with a 5V 2A power source.

BẢO TRÌ

  • Vệ sinh các điểm tiếp xúc: If you experience a bad connection or intermittent operation, wipe the spring or the ends of the battery with alcohol to remove any debris or residue.
  • Tightening Tubes: Ensure the flashlight body tubes are fully tightened to maintain proper electrical contact and water resistance.
  • Lưu trữ dài hạn: When not in use for an extended period, unscrew the body tube slightly or remove the batteries to prevent accidental activation and battery drain.
  • Khả năng chống nước: Always ensure the USB-C port's rubber cover is securely closed to maintain the IPX8 waterproof rating.

Xử lý sự cố

  • Đèn pin không bật:
    • Check if the insulating paper has been removed from between the battery and contact.
    • Đảm bảo pin được lắp đúng cực.
    • Fully tighten the body tubes to ensure proper electrical connection.
    • Charge the batteries if they are depleted.
  • Hoạt động không liên tục:
    • Clean battery contacts and springs with alcohol.
    • Đảm bảo tất cả các bộ phận được siết chặt an toàn.
  • Giảm độ sáng/Thời gian hoạt động:
    • Perform temperature calibration as per the Anduril 2.0 UI instructions.
    • Đảm bảo pin được sạc đầy.

Thông số kỹ thuật

Thương hiệusofirn
Người mẫuSP36
Loại nguồn sángLED (4*LED 5000K)
Độ sáng trắng8000 Lumen (Tối đa)
Khoảng cách đường dẫn ánh sáng450 mét
Nguồn điệnBattery Powered (3 Lithium Polymer 18650 batteries included)
Cổng sạcUSB-C
Vật liệuNhôm
Mức độ chống nướcChống nước IPX8
Trọng lượng sản phẩm300 Grams (without batteries)
Thời gian chạy72 hours (low setting)

Bảo hành và Hỗ trợ

The Sofirn SP36 Pro comes with a 1-year manufacturer's warranty covering defects in materials and workmanship.

For technical support, warranty claims, or additional product information, please visit the official Sofirn website or contact their customer service through the details provided on their packaging or official store page.

Bạn có thể tìm thêm thông tin và hỗ trợ tại Sofirn Amazon Store.

Tài liệu liên quan - SP36

Trướcview Hướng dẫn sử dụng Sofirn SP36 BLF Anduril (SP36 Pro)
Hướng dẫn sử dụng đèn pin Sofirn SP36 BLF Anduril và SP36 Pro, chi tiết về các biện pháp an toàn, hướng dẫn khởi động nhanh, sơ đồ giao diện người dùng, thông số kỹ thuật, chế độ nhấp nháy, cấu hình chung, cấu hình nhiệt và khắc phục sự cố.
Trướcview Sách hướng dẫn sử dụng đèn pin XHP70.2: Hướng dẫn và bảo quản
Hướng dẫn toàn diện về Đèn pin LED sạc XHP70.2, bao gồm hướng dẫn sử dụng thiết yếu, cách chăm sóc pin, quy trình sạc và mẹo bảo trì để đạt hiệu suất tối ưu.
Trướcview Hướng dẫn sử dụng đèn pin sạc EDC Sofirn SC28
Sách hướng dẫn sử dụng đầy đủ cho đèn pin sạc EDC Sofirn SC28, bao gồm thông số kỹ thuật, cách vận hành, an toàn và xử lý sự cố. Đèn có độ sáng 2800 lumen và đạt chuẩn hiệu suất ANSI/NEMA FL1.
Trướcview Hướng dẫn sử dụng đèn pin Sofirn SC32: Tính năng, hoạt động và thông số kỹ thuật
Sách hướng dẫn sử dụng đầy đủ cho đèn pin Sofirn SC32, bao gồm chi tiết các tính năng, hiệu suất ANSI/NEMA FL1, chế độ vận hành, sạc, hướng dẫn an toàn và xử lý sự cố. Tìm hiểu cách sử dụng đèn pin LED 2000 lumen của bạn.
Trướcview Sofirn ST2 User Manual
Comprehensive user manual for the Sofirn ST2 flashlight. Includes detailed specifications, charging instructions, operation guides for white, red, and UV light modes, lock/unlock functions, and important safety warnings and precautions.
Trướcview Hướng dẫn sử dụng Sofirn SK40 - Đèn pin LED chiến thuật
Sách hướng dẫn sử dụng đầy đủ cho đèn pin chiến thuật Sofirn SK40, bao gồm thông số kỹ thuật, hiệu suất ANSI/NEMA FL1, chế độ hoạt động, đèn báo trạng thái pin, hướng dẫn sạc, thông tin liên hệ và các cảnh báo an toàn quan trọng.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.