Inscabin P200 Portable DAB/DAB+ FM Digital Radio User Manual

Giới thiệu

Cảm ơn bạn đã muaasing the Inscabin P200 Portable DAB/DAB+ FM Digital Radio. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

Hình 1: Mặt trước view of the Inscabin P200 Portable DAB/DAB+ FM Digital Radio.

Cài đặt

1. Tháo dỡ và tính phí ban đầu

Carefully remove the radio from its packaging. Ensure all components are present. Before first use, fully charge the built-in 1800mAh rechargeable battery. Connect the appropriate charging cable to the DC 9V port on the back of the unit and to a power source.

Figure 2: Back panel of the Inscabin P200, showing the charging port and antenna.

2. Powering On and Antenna Adjustment

Locate the power switch on the back of the unit and slide it to the 'ON' position. Extend the telescopic antenna for optimal reception when using DAB/DAB+ or FM radio modes.

3. Initial Scan for Radio Stations

Upon first power-on, the radio will typically prompt you to perform an automatic scan for DAB/DAB+ stations. Follow the on-screen instructions. This process will find and store all available digital radio stations in your area. For FM radio, a similar auto-scan function is available to find and store FM stations.

4. Thiết lập thời gian và ngày tháng

Navigate to the 'System Settings' menu using the control buttons. Select 'Time/Date' to manually set the current time and date if it is not automatically updated via DAB signal.

Hướng dẫn sử dụng

1. Lựa chọn chế độ

Press the 'MODE' button to cycle through available modes: DAB Radio, FM Radio, Bluetooth, and AUX-in. The current mode will be displayed on the color LCD screen.

Figure 3: Front panel controls and display for mode selection and navigation.

2. Vận hành Radio DAB/DAB+

• Danh sách trạm: After an auto-scan, use the navigation buttons to browse the list of available DAB/DAB+ stations.
• Quét toàn bộ: If you move to a new location or wish to update the station list, perform a 'Full Scan' from the DAB menu.
• Dò thủ công: For advanced users, manual tuning allows direct input of DAB frequencies.
• Cài đặt trước: Save your favorite stations by pressing and holding a preset button (e.g., 1-10, if available, or follow on-screen instructions for digital presets). Recall saved stations by briefly pressing the corresponding preset button. The device supports up to 40 presets.

3. Hoạt động của đài FM

• Tự động quét: In FM mode, initiate an auto-scan to find and store available FM stations.
• Điều chỉnh thủ công: Use the navigation controls to fine-tune FM frequencies.
• Cài đặt trước: Similar to DAB, save and recall your preferred FM stations using the preset functions.

4. Kết nối Bluetooth

Switch the radio to Bluetooth mode. The device will enter pairing mode, indicated on the LCD screen. On your smartphone, tablet, or other Bluetooth-enabled device, search for 'Inscabin P200' (or similar name) in the Bluetooth settings and connect. Once paired, you can stream audio wirelessly to the radio.

5. Kết nối AUX-in

Connect an external audio device (e.g., MP3 player, laptop) to the AUX-in port using a 3.5mm audio cable. Switch the radio to AUX-in mode to play audio from the connected device.

6. Sử dụng tai nghe

For private listening, plug standard 3.5mm headphones into the headphone jack on the back of the unit. The internal speaker will automatically mute.

7. Cài đặt bộ chỉnh âm

Access the 'System Settings' menu and select 'Equaliser'. Choose from various preset sound profiles (e.g., Normal, Classic, Jazz, Pop, Rock, Speech) or customize your own 'My EQ' settings for personalized audio experience.

8. Đồng hồ báo thức kép

The Inscabin P200 features a dual alarm clock function. Navigate to 'System Settings' and then 'Alarm' to set up two independent alarms. You can configure alarm time, source (DAB, FM, or buzzer), and volume.

9. Hẹn giờ ngủ

To set a sleep timer, go to 'System Settings' and select 'Sleep'. Choose a duration (e.g., 15, 30, 60 minutes) after which the radio will automatically turn off.

10. Điều khiển từ xa

The radio comes with a remote control for convenient operation from a distance. Use it to change modes, adjust volume, navigate stations, set presets, and control other functions without directly interacting with the unit.

BẢO TRÌ

1. Vệ sinh

Lau sạch radio bằng vải mềm, khô. Không sử dụng chất tẩy rửa có tính mài mòn, sáp hoặc dung môi vì chúng có thể làm hỏng lớp hoàn thiện. Tránh xịt trực tiếp chất lỏng lên thiết bị.

2. Chăm sóc pin

To prolong battery life, avoid fully discharging the battery frequently. Recharge the battery when the low battery indicator appears. If the unit will not be used for an extended period, charge it periodically to maintain battery health.

3. Lưu trữ

Store the radio in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the antenna is retracted to prevent damage.

Xử lý sự cố

• Không có điện: Ensure the power switch is 'ON' and the battery is charged. Connect the radio to a power source using the charging cable.
• No Radio Signal (DAB/FM): Extend the telescopic antenna fully. Perform a 'Full Scan' to search for stations. Try moving the radio to a different location, closer to a window, to improve reception.
• Bluetooth không kết nối: Ensure the radio is in Bluetooth mode and discoverable. Turn off and on Bluetooth on your external device. Make sure no other device is currently connected to the radio.
• Không có âm thanh: Check the volume level on both the radio and the connected device (if using Bluetooth/AUX-in). Ensure headphones are not plugged in if you expect sound from the speaker.
• Điều khiển từ xa không hoạt động: Check the battery in the remote control. Ensure there are no obstructions between the remote and the radio.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Inscabin webtrang web. Giữ lại bằng chứng mua hàng để yêu cầu bảo hành.