Hướng dẫn sử dụng thiết bị ghi hình hành trình hai camera COMTEC ZDR025

1. Giới thiệu

The COMTEC ZDR025 is a high-performance dual-camera drive recorder designed to capture both front and rear views of your vehicle in Full HD resolution. Released in December 2019, this device is equipped with advanced features such as STARVIS technology for superior night vision, GPS for accurate location data, and a G-sensor for impact detection. It offers comprehensive recording capabilities, including continuous, impact, and manual recording, along with intelligent safety driving support and parking surveillance functions to enhance your driving experience and provide crucial evidence in unforeseen events.

Image: The COMTEC ZDR025 main unit and rear camera, showcasing thiết kế nhỏ gọn của chúng.

2. Thiết lập

2.1 Nội dung gói

Trước khi cài đặt, hãy đảm bảo tất cả các thành phần đều có sẵn:

• Đơn vị chính x1
• Camera lùi x1
• Camera Cable (approx. 9.0m) x1
• Main Unit Mounting Stay x1
• Main Unit Mounting Stay Fixing Double-Sided Tape x1
• Rear Camera Fixing Double-Sided Tape x1
• Tẩy dầu mỡasing Cleaner x1
• 12V Cigarette Plug Cord (approx. 4m) x1
• microSDHC Card (32GB/Class10) x1
• Instruction Manual (with Warranty) x1

2.2 Các bước cài đặt

1. Chuẩn bị bề mặt lắp đặt: Use the included degreasing cleaner to thoroughly clean the area on your windshield where the main unit will be mounted, and the rear window for the rear camera. Ensure the surface is dry and free of dust.
2. Lắp đặt thiết bị chính: Attach the main unit mounting stay to the main unit. Apply the double-sided tape to the stay and firmly press the main unit onto the cleaned windshield, ideally behind the rearview gương để tránh cản trở bạn view.
3. Lắp đặt camera sau: Attach the rear camera to the rear window using the provided double-sided tape. Position it centrally for optimal rear view ghi âm.
4. Kết nối các máy ảnh: Connect the rear camera to the main unit using the long camera cable. Route the cable neatly along the vehicle's interior trim to conceal it and prevent interference with driving.
5. Lắp thẻ nhớ microSD: Insert the included 32GB microSDHC card into the main unit's designated slot.
6. Kết nối nguồn điện: Connect the 12V cigarette plug cord to the main unit and then into your vehicle's cigarette lighter socket. For parking surveillance functionality, the separately sold parking surveillance direct wiring cord [HDROP-14] is required for a continuous power supply.
7. Thiết lập ban đầu: Once powered on, follow the on-screen prompts to set the date, time, and other preferences. Ensure GPS reception is active for accurate time and location data.

Hình ảnh: Examples of the main unit and rear camera installed in a vehicle.

3. Hướng dẫn vận hành

3.1 Ghi âm cơ bản

The ZDR025 begins recording automatically when the engine is turned ON, thanks to its high-speed startup system. It records both front and rear views in Full HD (2 million pixels).

• Ghi liên tục: Records continuously from engine ON to OFF. Older data is automatically overwritten when the microSD card capacity is reached.
• Impact Recording: The built-in G-sensor detects impacts and automatically saves the relevant footage as protected 'Impact Recording Data'. This prevents it from being overwritten by continuous recording.
• Ghi thủ công: Press the designated button to manually initiate a recording. This footage is also saved as protected 'Manual Recording Data'.

Image: The ZDR025 main unit display during recording, showing Full HD, HDR, and speed information.

3.2 Tính năng ghi âm nâng cao

• STARVIS Technology: The rear camera incorporates Sony's STARVIS back-illuminated CMOS sensor, enabling bright and clear recording even in low-light conditions such as at night or inside tunnels.
• HDR/WDR Function: Equipped with High Dynamic Range (HDR) and Wide Dynamic Range (WDR) functions (rear camera supports HDR only), the device records clear images even in scenes with significant brightness differences, such as strong backlighting, whiteouts, or blackouts.
• LED Traffic Light Compatibility: Designed to record reliably even with different power frequencies used by LED traffic lights in various regions (Eastern/Western Japan).
• Recording Image Inversion: The built-in G-sensor automatically detects the device's orientation and inverts the recorded image, allowing flexible installation on dashboards or other surfaces.

3.3 Safety Driving Support Functions

The ZDR025 includes several features to assist with safe driving:

• Rear Vehicle Approach Notification: Detects vehicles approaching from behind and alerts you with voice or alarm. It can also automatically save this event as 'Rear Vehicle Approach Recording Data'.
• Forward Vehicle Departure Notification: Cảnh báo khi xe phía trước bắt đầu di chuyển.
• Front Signal Notification: Detects and alerts you when the traffic light ahead turns green.
• Driving Support Function: Detects sudden acceleration, sudden deceleration, or sudden steering and provides alerts.
• Vehicle Speed Alarm: Notifies you if you exceed a preset speed limit.

Note: These safety driving support functions are aids and do not prevent accidents. Always pay attention to actual traffic conditions and drive safely. Some functions require active GPS reception. Performance may vary based on environmental conditions.

3.4 Parking Surveillance Function (Optional)

Requires the separately sold parking surveillance direct wiring cord [HDROP-14].

• Impact Quick Recording: Activates upon impact detection while parked, recording images. This mode conserves power for extended surveillance.
• One-Time Parking Surveillance Mode: Temporarily activates parking surveillance even if the main function is OFF. Useful for specific situations like parking in unfamiliar areas.
• Parking Surveillance Mode Pass: Temporarily disables parking surveillance mode. Useful in environments prone to vibrations (e.g., mechanical parking lots, windy days) to prevent false triggers.
• Ghi thời gian trôi đi: Records still images at 1-second intervals and compresses them into a short video, allowing for long-duration parking surveillance. This also applies to normal driving mode.

3.5 Viewing Dữ liệu được Ghi lại

Hình ảnh được ghi lại có thể viewed directly on the main unit's LCD screen. For detailed analysis, use the dedicated viewer software downloadable from the COMTEC webđịa điểm.

• Viewer Phần mềm: Allows you to check not only video and audio but also G-sensor information. You can also convert recorded data to video or still images and save them to your computer.

4. Bảo trì

• Chăm sóc thẻ SD: The ZDR025 uses a proprietary file system that significantly reduces SD card fragmentation, minimizing the need for frequent formatting. However, it is still recommended to periodically check the SD card's health via the device's settings or the viewer software. If the SD card is corrupted, the device's LED display will indicate an abnormality upon startup.
• Vệ sinh ống kính: Regularly clean the front and rear camera lenses with a soft, lint-free cloth and a mild lens cleaner. Avoid abrasive materials that could scratch the lens.
• Vệ sinh thiết bị: Wipe the main unit and rear camera body with a dry or slightly damp cloth. Do not use strong chemical cleaners.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your ZDR025, refer to the following common problems and solutions:

For further assistance, please refer to the detailed troubleshooting section in the full instruction manual or contact COMTEC customer support.

6. Thông số kỹ thuật

7. Bảo hành và Hỗ trợ

The COMTEC ZDR025 comes with a warranty. Please refer to the warranty information provided in the included instruction manual for details on coverage and terms.

For technical support, inquiries, or to download the latest viewer software, please visit the official COMTEC website. Contact information for customer service can also be found in your instruction manual.