Kepma UV LED Nail Dryer Mini Lamp

1. Giới thiệu và kết thúcview

The Kepma UV LED Nail Dryer Mini Lamp is a compact and portable device designed for curing gel nail polish, gel stickers, and UV resin. Featuring dual light sources (365nm+405nm), it provides efficient and quick curing. Its mini size and lightweight design make it ideal for personal use and travel. Please note, this lamp is specifically designed for gel-based products and is not suitable for traditional nail polish, which requires air drying.

Image: The Kepma UV LED Nail Dryer Mini Lamp highlighting its innovative dual light sources for efficient curing.

2. Tính năng sản phẩm

• Nguồn sáng kép: Utilizes both 365nm and 405nm wavelengths for effective curing of various gel nail polishes, gel stickers, and UV resins.
• Nhỏ gọn và di động: Measures approximately 3.54"D x 5.12"W x 0.79"H and weighs 0.11 lb, making it easy to carry in a makeup bag or handbag.
• Cài đặt hẹn giờ: Offers three curing time options: 60 seconds (single press), 180 seconds (second press), and a continuous "Stay On" mode (press and hold for 3-4 seconds).
• Bảo vệ mắt và da: Emits light closer to white light, designed to be gentle on eyes and skin.
• Thiết kế bền bỉ: Engineered for a long lifespan of approximately 50,000 hours.

Image: The mini lamp with its compact dimensions clearly illustrated.

3. Có gì trong hộp

• Kepma UV LED Nail Dryer Mini Lamp
• Cáp nguồn (USB)

Image: The product packaging displaying the nail lamp and its included power cable.

4. Thiết lập

1. Unfold the two small legs on the sides of the lamp to elevate it, creating space for your hand or foot.
2. Connect the provided USB power cable to the micro-USB socket on the side of the lamp.
3. Plug the other end of the USB cable into a compatible power source, such as a mobile power bank or a USB wall adapter (not included). The lamp is not rechargeable and requires continuous power during use.

Image: Visual guide for connecting the power cable and setting up the lamp's legs.

5. Hướng dẫn vận hành

1. Đảm bảo lamp is properly set up and connected to a power source.
2. Apply your gel nail polish or UV resin product as directed by its manufacturer.
3. Place your fingers or toes under the lamp.
4. To activate the 60-second timer: Nhấn nút BẬT / TẮT một lần.
5. To activate the 180-second timer: Press the ON/OFF button a second time.
6. To activate the "Stay On" mode: Press and hold the ON/OFF button for 3-4 seconds. The lamp will remain on until manually turned off or the self-protection function activates after 15 minutes.
7. Allow the product to cure for the recommended time. For best results, cure one hand (four fingers) at a time, then the thumb separately.
8. After curing, remove your hand/foot. The lamp will turn off automatically if a timer was selected.

Important: This lamp is only for gel-based products. It will not dry traditional nail polish.

6. Bảo trì

• Vệ sinh: Lau sạch lamp's exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Kho: When not in use, fold the legs back into the lamp's body for compact storage. Store in a cool, dry place away from direct sunlight and moisture.
• Xử lý: xử lý lamp with care to avoid damage to the LED bulbs or the folding legs.

KHAI THÁC. Xử lý sự cố

• Gel Polish Remains Sticky After Curing: This is normal for many gel polishes. It is called the inhibition layer and should not be wiped until a top coat is applied and cured. Ensure you are using gel nail polish, not traditional polish. Verify the curing time recommended by your gel polish brand. Apply gel polish in thin coats; thick coats may not cure properly.
• Lamp Không bật: Kiểm tra xem cáp USB có được kết nối chắc chắn với cả hai cổngamp and the power source. Ensure the power source is active.
• Lamp Turns Off Too Quickly: Confirm you have selected the desired timer setting (60s, 180s) or activated the "Stay On" mode by pressing and holding the button for 3-4 seconds. The lamp has a self-protection function that may activate after 15 minutes in "Stay On" mode, requiring it to be turned on again.

Image: Frequently Asked Questions regarding gel polish curing with the lamp.

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

This Kepma UV LED Nail Dryer Mini Lamp đi kèm với một Bảo hành 12 tháng from the date of purchase. For any product inquiries, technical support, or warranty claims, please contact customer support through the retailer where the product was purchased or visit the official Kepma webtrang web để được hỗ trợ thêm.