Tai nghe Nitecore NU30amp Hướng dẫn sử dụng

Giới thiệu

The Nitecore NU30 is a high-performance, lightweight rechargeable headlamp designed for various outdoor activities. It features a powerful primary white LED, high CRI auxiliary white LEDs for close-range illumination, and a red auxiliary LED for preserving night vision. With its integrated USB-C charging and durable construction, the NU30 provides reliable lighting for your adventures.

Hình ảnh: Mặt trước view của đầu Nitecore NU30amp Với băng đô có thể điều chỉnh.

Nội dung gói

Vui lòng kiểm tra gói hàng để biết các mục sau:

• Tai nghe Nitecore NU30amp
• Cáp sạc USB-C sang USB-C
• Băng đô
• Nhãn dán Nitecore

Sản phẩm trênview

The Nitecore NU30 features a dual-button interface for intuitive control over its various light sources and brightness levels. The headlamp unit is attached to an adjustable, elastic headband for comfortable wear.

Image: Diagram illustrating the location of the Power Button and Mode Button on the Nitecore NU30 headlamp.

Kiểm soát:

• Nút nguồn: Điều khiển bật/tắt nguồn và mức độ sáng cho đèn trắng chính.
• Nút chế độ: Switches between different light sources (primary white, auxiliary white, auxiliary red) and special modes.

Sạc đầuamp

The NU30 headlamp is equipped with a built-in 1500mAh Li-ion battery and a USB-C charging port for convenient recharging. A power indicator will show the charging status.

1. Tìm cổng sạc USB-C ở bên cạnh đèn pha.amp.
2. Connect the included USB-C to USB-C charging cable to the headlamp and a USB power source (e.g., wall adapter, power bank, computer).
3. The power indicator will illuminate during charging.
4. Charging is complete when the indicator light changes or turns off (refer to the power indicator section for details). A full charge typically takes approximately 2 hours.

Image: The Nitecore NU30 headlamp being charged via its USB-C port.

Hướng dẫn sử dụng

The NU30 offers multiple light sources and modes for various lighting needs.

Image: Diagram illustrating the three distinct light sources available on the Nitecore NU30 headlamp.

Bật/Tắt nguồn:

• Bật: Press and hold the Power Button for 1 second. The headlamp will turn on in the previously used primary white light mode.
• Để tắt: Khi đầuamp is on, long press either the Power Button or the Mode Button until the light turns off.

Chuyển đổi nguồn sáng:

Khi đầuamp is on, short press the Mode Button to cycle through the light sources in the following order:

Primary White Light → Auxiliary White Light → Auxiliary Red Light → Primary White Light...

Adjusting Brightness (Primary White Light):

When the Primary White Light is active, short press the Power Button to cycle through brightness levels:

Low → Mid → High → Low...

Auxiliary White Light Modes:

When the Auxiliary White Light is active, short press the Power Button to cycle through:

Ultralow → Flood → Ultralow...

Image: Visual comparison demonstrating the wide and even illumination of the TrueVision+ flood beam.

Auxiliary Red Light Modes:

When the Auxiliary Red Light is active, short press the Power Button to cycle through:

Low → High → Slow Flashing → Low...

Special Modes (SOS / Beacon):

Khi đầuamp is off, press and hold the Mode Button for 1 second to directly access SOS mode. While in SOS mode, short press the Power Button to switch to Beacon mode. Short press the Power Button again to return to SOS. Long press either button to turn off.

Đèn báo nguồn:

The power indicator light provides information on the remaining battery power. Refer to the product's specific indicator patterns for detailed battery status (e.g., flashes for remaining power, solid for charging, off for fully charged).

BẢO TRÌ

Proper maintenance ensures the longevity and optimal performance of your Nitecore NU30 headlamp.

• Vệ sinh: Lau đầuamp với một mềm mại, damp vải. Tránh sử dụng chất tẩy rửa hoặc dung môi có tính ăn mòn.
• Kho: Lưu trữ tiêu đềamp in a cool, dry place when not in use. Recharge the battery every 3 months to maintain battery health if stored for extended periods.
• Khả năng chống nước: The NU30 is rated IP66, meaning it is protected against powerful water jets. Do not submerge the headlamp in water. Ensure the USB-C port cover is securely closed to maintain water resistance.

Xử lý sự cố

If you encounter issues with your NU30 headlampHãy thử các giải pháp sau:

• cái đầuamp không bật: Đảm bảo pin đã được sạc đầy. Kết nối đầu đèn.amp to a power source using the USB-C cable and check if the charging indicator activates.
• Ánh sáng phát ra yếu: Pin có thể yếu. Hãy sạc lại pin.amp đầy đủ.
• Không sạc được: Check the USB-C cable for damage and ensure the power source is functional. Try a different cable or power adapter.
• Các nút không phản hồi: Đảm bảo người đứng đầuamp is not in a locked mode (if applicable, refer to specific product features for lock-out functions). If issues persist, contact customer support.

Thông số kỹ thuật

Detailed technical specifications for the Nitecore NU30 headlamp:

Image: Comprehensive table detailing the technical specifications of the Nitecore NU30 headlamp.

Thông tin an toàn

Please read and follow these safety guidelines to prevent injury or damage to the headlamp:

• Do not shine the light directly into eyes, as this may cause temporary vision impairment.
• Không tháo rời hoặc sửa đổi headlampVì điều này có thể làm mất hiệu lực bảo hành và gây hư hỏng.
• Để xa tầm tay trẻ em.
• Tránh để lộ phần đầuamp với nhiệt độ khắc nghiệt hoặc ánh sáng mặt trời trực tiếp trong thời gian dài.

Bảo hành và Hỗ trợ

Nitecore products are backed by a warranty. For detailed warranty terms and conditions, please refer to the official Nitecore website or the warranty card included with your product. If you require technical support or have questions about your NU30 headlamp, please contact Nitecore customer service or your authorized dealer.

For more information, visit the official Nitecore webđịa điểm: www.nitecore.com