Hướng dẫn sử dụng máy ảnh chụp lấy liền Fujifilm Instax Mini 26

Giới thiệu

The Fujifilm Instax Mini 26 is an instant camera designed for capturing and printing photos immediately. It features simple operation and a compact design, allowing users to share physical prints with ease. This manual provides essential information for setting up, operating, and maintaining your Instax Mini 26 camera.

Có gì trong hộp

• Máy ảnh Instax Mini 26
• Rainbow film pack
• 2 pin CR2
• Close-up lens

Cài đặt

1. Lắp pin

The Instax Mini 26 requires two CR2 batteries. Open the battery compartment cover, insert the batteries according to the polarity indicators, and close the cover securely.

2. Tải phim

1. Open the film compartment door on the back of the camera.
2. Align the yellow mark on the film pack with the yellow mark on the camera.
3. Insert the film pack straight into the compartment. Do not press the two rectangular holes on the back of the film pack.
4. Close the film compartment door. The film counter will display 'S' (Start).
5. Press the shutter button once to eject the black film cover. The film counter will then show '10', indicating 10 exposures remaining.

Hình ảnh: Phía sau view of the Instax Mini 26 camera, showing the film compartment and a sticker illustrating how to load film correctly. The film eject slot is visible at the top.

Vận hành máy ảnh

1. Bật / Tắt nguồn

Press the power button (usually a red button or a switch near the lens) to turn the camera on. The lens will extend. Press it again to turn off the camera and retract the lens.

2. Chụp ảnh

1. Bật máy ảnh.
2. Nhìn qua viewcông cụ tìm để tạo khung cho ảnh của bạn.
3. Press one of the two shutter buttons (one for horizontal, one for vertical shooting) to take a picture. The photo will be ejected from the top slot.

Hình ảnh: Mặt trước view of the Fujifilm Instax Mini 26 camera, showcasing its blue and white design, lens, flash, and shutter button.

3. Lighten-Darken Control

Use the Lighten-Darken Control buttons to adjust the brightness of your prints. This feature allows you to make the print finish brighter or darker depending on the lighting conditions and desired effect.

4. Selfie Mirror and Close-up Lens

The camera includes a selfie mirror mounted on the lens for easy self-portraits. For detailed close-up shots, attach the included close-up lens. This allows you to focus on subjects as close as 35 cm.

Hình ảnh: Góc cạnh view of the Fujifilm Instax Mini 26 camera, highlighting the lens, flash, and the "instax mini 26" branding.

5. Automatic Exposure Compensation

The Instax Mini 26 features built-in automatic exposure compensation, which helps capture the right amount of light in most shooting situations, including low lighting conditions.

BẢO TRÌ

• Keep the lens clean using a soft, dry cloth. Avoid touching the lens directly.
• Bảo quản máy ảnh ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ cao.
• Nếu không sử dụng máy ảnh trong thời gian dài, hãy tháo pin ra.
• Use only genuine Fujifilm Instax Mini film for optimal performance.

Xử lý sự cố

Thông số kỹ thuật

• Phim ảnh: Fujifilm Instax Mini Instant Film
• Kích thước bước ảnh: 62mm x 46mm
• Ống kính: 2 components, 2 elements, f=60mm, 1:12.7
• Phạm vi tiêu cự: 0.6m - ∞
• Màn trập: Programmed electronic shutter, 1/400 sec.
• Kiểm soát tiếp xúc: Automatic, Interlocking range (ISO 800): LV 5.0 - LV 15.5, Exposure compensation (Lighten-Darken Control): ±2/3 EV
• Film Ejection: Tự động
• Đèn nháy: Built-in, automatic electronic flash, Fill-in Flash Mode, Red-eye Reduction Mode
• Nguồn điện: Hai pin lithium CR2/DL CR2
• Kích thước: 5.5 x 4.25 x 5.75 inch (xấp xỉ)
• Cân nặng: 1.2 pounds (excluding batteries, strap, and film pack)

Video sản phẩm chính thức

Bảo hành và Hỗ trợ

For detailed warranty information and customer support, please refer to the official Fujifilm website or contact their customer service. Specific warranty terms may vary by region and purchase location.

Official Fujifilm Webđịa điểm: www.fujifilm.com