Fiber Optic Link Solution - World Leading Leader in ProAV | Opticis
옵티시스 (Opticis) | 비디오 및 오디오 광링크 솔루션옵티시스 (Opticis) | 비디오 및 오디오 광링크 솔루션
User Manual for OPTICIS models including: OHM-44UHD HDMI 2.0 4x4 Matrix, OHM-44UHD, HDMI 2.0 4x4 Matrix
OHM-44UHD Manual Page 1 HDMI 2.0 4x4 Matrix USER MANUAL OHM - 44UHD Doc No. : OM-H4K201028 / Ver 1.1
File Info : application/pdf, 20 Pages, 1.22MB
DocumentDocumentHDMI 2.0 4x4 Matrix
USER MANUAL OHM 44UHD
Doc No. : OM-H4K201028 / Ver 1.1 OHM-44UHD Manual
Page 1
Manual Contents
1 Introduction...................................................................................................... 3 1.1 Applications........................................................................................... 3 1.2 Key Features............................................................................................... 3 1.3 System Requirements............................................................................... 4 1.4 OHM-44UHD Shipping Contents................................................................ 4
2 Operation Controls and Functions......................................................................... 4 2.1 Front Panel............................................................................................. 4 2.2 Real Panel............................................................................................. 5 2.3 Remote Control...................................................................................... 6 2.4 IR Pin Definitions.................................................................................... 6 2.5 RS-232 Protocols.................................................................................... 7 2.6 Telnet and RS-232 Commands.................................................................. 7 2.7 Telnet Control.......................................................................................... 9 2.8 WebGUI Control...................................................................................... 10
3 Connection Diagram............................................................................................. 17 4. Specifications......................................................................................................... 18
4.1 Technical Specification.............................................................................. 18 4.2 Supported Resolution................................................................................. 19
OHM-44UHD Manual
Page 2
1. Introduction
Welcome!
Congratulations on your purchase of HDMI 2.0 4x4 Matrix, OHM-44UHD. This manual contains information that will assist you in installing and operating the product.
Opticis HDMI 2.0 4x4 Matrix, OHM-44UHD, provides a high level of audio and video performance with support for resolutions up to 4K@60Hz (RGB & YCbCr : 4:4:4). It also supports HDR (High Dynamic Range) to deliver more realistic and objective video signal as well as pass-through support of digital audio formats to bring lossless sound. The four (4) HDMI inputs and four (4) HDMI outputs support full matrix switching function with various control methods such as front panel buttons, RS-232, telnet, Web GUI and IR remote. User-friendly WebGUI interface supports storing and recalling up to four routing presets, making remote control and configuration of the unit conveniently. Built in EDID management support allows the users to choose and select from multiple built-in EDIDs as well as to upload custom EDID files and download the EDID from connected displays.
1.1 Applications
Medical Imaging System Video Wall System Control Room and Conference Room Military, Aerospace, and education Digital Signage
1.2 Key Features
Supports HDMI 2.0 Standards Supports HDMI 2.0 resolution up to 4096x2160@60Hz (RGB & YCbCr : 4:4:4) Provides user-friendly EDID management tools with 4 slots for user-created EDIDs, and
EDID bypass support Supports storing and recalling of up to four routing presets Controllable via front-panel buttons, RS-232, telnet, WebGUI, and IR remote HDCP 1.4 and 2.2 compliant Supports HDR at 10 bit or 12 bit speeds respectively within its maximum bandwidth,
18Gbps Supports 3D content transmission Supports pass-through of LPCM 7.1, bit and HD bit audio formats over HDMI Certifies for FCC and CE standards
OHM-44UHD Manual
Page 3
1.3 System Requirements
You must have a HDMI source and a display. In order to be connected, it should support maximum graphic resolution feature of displays.
No need for special requirements of memory size, CPU speed, or chipsets, if you have already properly installed your HDMI systems or graphic cards
Initial trail of entire system with Opticis HDMI 2.0 optical extenders or certified HDMI copper cables for long distance transmission are recommended prior to installation of the system.
1.4 Shipping Group
OHM-44UDS Matrix: 1 EA IR Extender: 1 EA OTG USB converter: 1 EA 24V/2.7A DC Power Adaptor: 1 EA IR Remote Control with Battery: 1 EA Power Cord: 1 EA User Manual: 1 EA
2. Operation Controls and Functions
2.1 Front Panel
1 IR Window: Receives IR signals from the included IR remote for control of OHM-44UHD unit. 2 Power Button & LED: Press power button to turn OHM-44UHD on (green LED) or place it into
stand-by mode (red LED). 3 LOCK& LED: Press to lock all button functions on the front panel. Press and hold for 3 seconds to
release the lock function. The LED will be flashing when the front panel is in locked 4 A~D: Press and hold these buttons to switch available inputs for the associated output.
5 LED1~4: These LEDs will be illuminated to indicate which sources are currently selected for each output. No flashing LED for an output that indicates the output is muted.
OHM-44UHD Manual
Page 4
2.2 Real Panel
1
2
3
4
A
B
C
D
1
2
1
2
3
4
5 67
3
4 5
1 INPUT 1~4: Connect to HDMI display source such as PC, media players or set-top boxes. DVI
sources are supported with the use of an HDMI to DVI adapter.
2 OUTPUT A~D: Connect to HDMI displays such as monitor, TV or amplifiers for digital video.
3 IR IN: Connect to the provided IR Extender to extend the IR control range of the unit. Ensure that the remote being used is within direct line-of-sight of the IR Extender.
4 RS232: Connect directly to a PC, laptop or other serial control device to send RS-232 commands to control the unit.
5 Control: Connect directly, or through a network switch, to your PC/ laptop to control the OHM-44UHD via telnet/WebGUI.
6 SERVICE: Service slot is reserved for firmware update use only.
7 DC 24V: Plug the 24V DC power adapter into the unit and connect it to an AC wall outlet for power.
OHM-44UHD Manual
Page 5
2.3 . Remote Control
2.4 IR Pin Definitions
OHM-44UHD Manual
Page 6
2.5 RS-232 Protocols
MATRIX
Pin
Definition
1
NC
2
Tx
3
Rx
4
NC
5
GND
6
NC
7
NC
8
Nc
9
NC
REMOTE CONTROLLER
Pin
Definition
1
NC
2
Rx
3
Tx
4
NC
5
GND
6
NC
7
NC
8
Nc
9
NC
Baud Rate: 115200bps Data bit: 8 bits Parity: None Flow Control: None Stop Bit: 1
2.6 Telnet and RS-232 Commands
COMMAND
A N B N C N D N I N AB..... N SETIP x.x.x.x x.x.x.x x.x.x.x
IPCONFIG
RSTIP P0 P1 OHM-44UHD Manual
DESCRIPTION
Switch Output A to Input N
Switch Output B to Input N Switch Output C to Input N Switch Output D to Input N Switch All Output to Input N
Switch output AB....to input N Setting IP, Subnet, Gateway(Static IP) Display The Current IP Configuration Set IP Configuration to DHCP
DESCRIPTION OF PARAMETER N= 1~4 N= 1~4 N= 1~4 N= 1~4 N= 1~4 N= 1~4 X=0~255
NONE
NONE
Power Off Power On
NONE NONE
Page 7
STORE N SHOW N COMMAND PRESET N Name N N1 N1=ABCDEFGH(Max Length=8) ST EM N N1
EM? N RS USBISP HELP ? QUIT
Store Current I/ O to Position N Show Current Port N I/O Position DESCRIPTION
Preset the store I/O Position N Name port N as N1
N= 1~4
N= 1~4 DESCRIPTION OF PARAMETER N= 1~4
N= 1~4
Show Unit Firmware Version Setting port N EDID Mode to N1
Show port N current EDID mode. Routing Reset to Default Update FW by USB Display all available commands and its description Display all available commands Quit Telnet
NONE
N= 1~4 N1= 1-FHD2CH, 2-FHDMCH, 3-4KUHD2CH, 4-4KUHDMCH, 5-4KUHD+2CH, 6-4KUHD+MCH, 7-TXA, 8-TXB, 9-TXC, 10-TXD, 11-USER1, 12-USER2, 13-USER3, 14-USER4 N= 1~4
NONE NONE NONE
NONE
NONE
Note: Commands will not be executed unless followed by a carriage return. Commands are not case-sensitive.
OHM-44UHD Manual
Page 8
2.7 Telnet Control
The PC/Laptop needs to be connected to the same active networks with OHM-44UHD to use Telnet Control. · To access Telnet in Windows 7 or 10, click on the "Start" menu and type "cmd" in the search field, then press "Enter". · Under Mac OS X, go to GoApplicationsUtilitiesTerminal
See below for reference.
Once in the CLI (Command Line Interface) type "telnet" followed by the IP address of the unit (and the port number if it is non-standard) and then press "Enter"
This will connect us to the unit we wish to control. Type "help" to check the list of available commands.
OHM-44UHD Manual
Page 9
2.8 WebGUI Control
All primary functions of OHM-44UHD are controllable via the built in WebGUI. This control is presented across 3 separate tabs, including Switch, EDID Settings, and System Settings. The individual functions will be introduced in the following sections. To obtain device current IP address, you can either use RS232 or by installing Device Discovery Tool. Use current IP to login WebGUI to functions control
· Install the Device Discovery Tool Please obtain the Device Discovery software from your authorized dealer and save it in a directory where you can easily find it. Note: The unit's default IP address is 192.168.1.50
Connect OHM-44UHD and your PC/Laptop to the same active network and execute the Device Discovery software. Click on "Find Devices on Network" and a list of devices connected to the local network will show up indicating their current IP address.
By clicking on one of the listed devices you will be presented with the network details of that particular
device. If you choose, you can alter the static IP network settings for the device, or switch the
OHM-44UHD into DHCP mode to automatically obtain proper network settings from a local DHCP server. To switch to DHCP mode, please select DHCP from the IP mode drop-down, then click "Save" followed by "Reboot". Once you are satisfied with the network settings, you may use them to connect via Telnet or WebGUI.
The network information window provides a convenient link to launch the WebGUI directly.
OHM-44UHD Manual
Page 10
· Log in to the WebGUI To access the WebGUI, open a web browser on a PC/Laptop that is connected to an active network and type the IP address of OHM-44UHD into the web address entry bar. Log into the item by entering the appropriate user name and password. Note: The default user name and password are "admin"
· Switch Tab The Switch tab provides video routing settings, preset saving/loading, and I/O renaming options.
Routing Controls:
To begin assigning a new video route, please click the button of the HDMI output you wish to send video to (e.g. "OUTPUT A") and then click on the button of the preferred HDMI input port (e.g. "INPUT 3"). As you select each button they will change their color to orange. The new route will become active immediately and the routing information displayed on the buttons will change accordingly. If you need to route an input to multiple outputs, please select all of the appropriate output buttons before selecting the input port.
OHM-44UHD Manual
Page 11
Renaming I/O:
All inputs and outputs can be renamed as required. To rename the HDMI input and output ports please click the "edit" icon ( ). Click the "Save" icon to confirm the change. Note: Blank spaces (" ") are not allowed in names.
OHM-44UHD Manual
Page 12
Presets: OHM-44UHD can store up to 4 routing presets. Presets can be utilized to store multiple different routing states in advance for rapid, hassle-free, recall.
Preset Set: Once you have the matrix set the way you like, you can click the "store" icon ( ) in the upper right corner of the window. You may also name the preset at this stage by selecting the "edit" icon ( ). Click the preset's button when you are ready to commit the preset to memory.
Preset Recall: When you wish to load a previously stored setting, please click the "recall" icon ( ) and you will be presented with a choice of the available 4 presets. The preset will load immediately upon pressing the preset's button.
OHM-44UHD Manual
Page 13
· EDID Settings Tab OHM-44UHD provides the option of six built in EDIDs, four sink sourced EDIDs and four user uploaded EDIDs that can be assigned to each input port individually. The names of the four user uploaded EDIDs can changed if desired.
EDID Selection: The EDID Settings section allows for the assignment of an EDID to each individual input port. Select the preferred EDID from each dropdown menu. The EDID will be changed immediately. Note: In some rare cases it is possible for custom or external EDIDs to cause compatibility issues with certain sources. If this happens, it is recommended to switch to one of the 6 built in EDIDs for maximum compatibility.
EDID Renaming: All User EDIDs can be renamed as required. To rename an individual
User EDID please click the "edit" icon ( ). Click the "Save" icon to confirm the change. Note: Blank spaces (" ") are not allowed in names.
OHM-44UHD Manual
Page 14
EDID Upload: To upload a custom EDID, please click the "Choose File" button below the User EDID that you would like to change. A file selection window will appear, allowing you to locate and upload your preferred EDID file from your local PC. The EDID should be in the *.bin file format. Once the preferred file has been selected, please click the "Update" button, and the file will be transferred to the matrix.
EDID Download: To save an existing User EDID to your local PC please press the "Down- load" button next to the User EDID that you would like to save. The EDID will then be saved to your local PC as a *.bin file. To save a copy of the EDID from a connected sink, selected the preferred sink from the Sink EDID Download dropdown menu and then press the "Down- load" button next to the selection. The EDID will then be saved to your local PC as a *.bin file.
· System Settings This page provides system configuration options including turning the power on/off, changing the login password, changing the network settings, resetting the system to factory defaults, and updating the firmware.
Web User Settings:
To change the login password for OHM-44UHD, enter the username as "admin", type the current password in the "Old Password" field and then enter the preferred new password in the "New Password" and "Confirm Password" fields. Press "Save" to finalize the change.
OHM-44UHD Manual
Page 15
Web Login Timeout: This setting sets the length of idle time to wait before forcing a connected web user to be automatically logged out. Timeout values range from 5 to 60 minutes. To change this timeout value, select a new value from the dropdown and the change will be enforced immediately.
Network: The IP mode (DHCP or Static IP), IP address, subnet mask, and gateway of OHM-44UHD can be set here. When OHM-44UHD is set to "DHCP" mode, it will automatically attempt to obtain proper configuration information from the local DHCP server. If no DHCP server is available, or the user wishes to configure the network settings manually, please set OHM-44UHD to "Static IP" mode and enter the information as appropriate for your local network. Press "Save" to activate the changes.
Reset to Default:
To reset all routing settings press the "Routing Reset" button. To reset the entire OHM-44UHD to the factory defaults please press the "Factory Reset" button.
Firmware Upgrade:
To update the firmware of OHM-44UHD, press the "Choose File" button to select a new firmware file that is stored on your local PC. After an appropriate file has been selected, press the "Upgrade" button to begin the firmware update process.
OHM-44UHD Manual
Page 16
3. Connection Diagram
Blu-ray/PS4 Player Blu-ray/PS4 Player Blu-ray/PS4 Player Blu-ray/PS4 Player
1
2 INPUT 3
4
OUTPUT
IR IN
RS232
CONTROL
POWER
SERVICE
6GHDMI TV/Display
Projector
OHM-44UHD Manual
Page 17
4. Specifications
4.1 Technical Specifications
Video Bandwidth Input Ports
600MHz/18Gbps
4 x HDMI 1 x IR
1 x RS-232 1 x Mini USB(Service)
1 x RJ45(Control)
Output Ports Supported Resolutions :
IR Frequency Baud Rate
Power Supply ESD Protection
Dimensions
4 x HDMI 480i~1080p@24/50/60Hz 4K up to 4096x2160@60Hz (YUV 4:4:4, 8-bit)
VGA~WUXGA
30~50 kHz 115200 bps 24VDC/2.7A (US/EU standards, CE/FCC/ UL certified)
Human body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge)
436 mm x 44 mm x 160mm (W×H×D) [Case Only] 436 mm x 48 mm x 167.5mm(W×H×D) [All Inclusive]
Weight Chassis Material
Color Operating Temperature
Storage Temperature Relative Humidity
Power Consumption
OHM-44UHD Manual
2068g Metal Black 0°C~40°C/32°F~104°F -20°C~60°C/-4°F~140°F 20~90% RH (non-condensing)
21W
Page 18
4.2 Supported Resolutions (Hz)
DVI and HDMI Supported Resolutions (Hz) 640x480@60/72/75/85 720x400@85 800x600@56/60/72/75/85 1024x768@60/70/75/85 1152x864@75 1280x720@60 1280x768@60/75/85 1280x800@60 1280x960@60 1280x1024@60 1360x768@60 1366x768@60 1400x1050@60 1440x900@60 1600x900@60 1600x1200@60 1680x1050@60 1920x1080@60 1920x1200@60 1920x1440@60 2560x1600@60 1440x576i@50 1440x480i@59.94/60 720x480p@59.94/60 720x576p@50 1280x720p@50/59.94/60 1920x1080i@50/59.94/60 1920x1080p@23.97/24/25/29.97/30/50/59.94/60 3840x2160@24/25/30/50/60 4096x2160@24/25/30/50/60
OHM-44UHD Manual
Input
Output
Page 19
© 2020 Opticis Co., Ltd. All Rights Reserved Version 1.1 October 2020
NO
Date
1.0
2019.09
1.1
2020.10
Content First released Company Address Changed
Remark
OPTICIS HQ Opticis Co., Ltd. 3F, 305, Sanseong-daero, Sujeong-gu, Seongnam-si, Gyeonggi-do, 13354 South Korea Tel: +82 (31) 719-8033 Fax: +82 (31) 719-8032 www.opticis.com
For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis website www.opticis.com or contact techsupp@opticis.com
OHM-44UHD Manual
Page 20