Philips 800144 Downlight Surface Mounted LED Fixture User Manual

پروڈکٹ ختمview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

اہم خصوصیات:

• توانائی کی کارکردگی: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• لمبی عمر: Rated for 36,000 hours (based on 3 hours/day usage).
• ورسٹائل ماؤنٹنگ: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• نرم سفید روشنی: Provides a comfortable ambiance for general room lighting.
• dimmable: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

سیٹ اپ اور انسٹالیشن

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

تنصیب کے مراحل:

1. سب سے پہلے حفاظت: Ensure power to the installation area is turned off at the circuit breaker before beginning.
2. بڑھتے ہوئے سطح کو تیار کریں: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. وائرنگ جوڑیں: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. ماؤنٹ فکسچر: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. بجلی کی بحالی: ایک بار جب فکسچر محفوظ طریقے سے نصب اور وائرڈ ہو جائے تو، سرکٹ بریکر پر بجلی بحال کریں۔
6. ٹیسٹ کی فعالیت: مناسب آپریشن کی تصدیق کے لیے لائٹ سوئچ آن کریں۔

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

آپریٹنگ ہدایات

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

ہلکے رنگ کا درجہ حرارت:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

dimmable فعالیت:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

دیکھ بھال

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

صفائی:

• صفائی سے پہلے، یقینی بنائیں کہ سرکٹ بریکر پر فکسچر کی بجلی بند ہے۔
• فکسچر کے بیرونی حصے کو نرم سے صاف کریں، ڈیamp کپڑا
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• بجلی بحال کرنے سے پہلے یقینی بنائیں کہ فکسچر مکمل طور پر خشک ہے۔

خرابی کا سراغ لگانا

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• لائٹ آن نہیں ہوتی:
  • اس بات کو یقینی بنانے کے لیے سرکٹ بریکر کو چیک کریں کہ فکسچر کو بجلی فراہم کی گئی ہے۔
  • Verify that the light switch is in the "on" position.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• ہلکی ہلکی پھلکی:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • ڈھیلے وائرنگ کنکشن چیک کریں۔
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • If using a dimmer, ensure it is set to the desired brightness level.
  • Verify that the fixture is receiving the correct voltage (120 وولٹ)۔

If these steps do not resolve the issue, contact Philips customer support for further assistance.

وضاحتیں

وارنٹی کی معلومات

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering حصوں اور مزدوری کے لیے 2 سال خریداری کی تاریخ سے. وارنٹی کے دعووں کے لیے براہ کرم اپنی خریداری کا ثبوت اپنے پاس رکھیں۔

For warranty service or questions, please contact Philips customer support.

کسٹمر سپورٹ

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips webرابطے کی تفصیلات اور معاون وسائل کے لیے سائٹ۔

مینوفیکچرر: فلپس لائٹنگ

برانڈ: فلپس