UNITY M-LOK Mounting Kit
PRODUCT OVERVIEW
The AXON™ SL M-LOK® Mounting Kit increases functionality of the AXON™ SL remote switch by expanding the mounting capabilities to the M-LOK® rail. It replaces the rail clamps with a frame that provides attachment to any M-LOK® rail surface.
ENSURE FIREARM IS UNLOADED
WARNING
CAUTION
OVER-TORQUING FASTENERS CAN DAMAGE YOUR MOUNT AND WILL NOT BE COVERED BY WARRANTY.
- Ensure the Rail Clamps on your AXON™ SL are uninstalled prior to installing the M-LOK® Mounting Kit. Set the Rail Clamps and associated screws aside for safe keeping.
- Insert the M-LOK® Screws through the AXON™ SL M-LOK® Mounting Kit Frame and thread partially into the M-LOK® nuts.
- Guide the AXON™ SL Control Module through open slot of M-LOK® Mounting Kit until fully seated.
- Place the AXON™ SL with M-LOK® Mounting Kit in desired location on the rail. Guide the M-LOK® Screws with the M-LOK® Nuts installed through the desired M-LOK® slot. Lightly snug both Screws before applying torque. When torqueing, do not exceed 10 in-lbs (1.13 Nm). Ensure M-LOK® Nuts are fully perpendicular to M-LOK® slots in rail (fully seated).
CUSTOMER SUPPORT
INFO@UNITYTACTICAL.COM
©2023 UNITY Tactical. All Rights Reserved.
Specifications subject to change without notice. PAT: UTIP.CO 
Documents / Resources
 | UNITY M-LOK Mounting Kit [pdf] Instruction Manual M-LOK Mounting Kit, Mounting Kit, Kit |
