Categories: Uncategorized

Vizio E421VA Manual

USER MANUAL

Vizio HDTV
Modl: E421VA

Dear VIZIO Customer,
Congratulations on your new VIZIO High Definition LCD Television purchase. This User
Manual covers E371VA, E421VA, E470VA and E550VA 120HZ series models, for any
specific difference between the models please refer to the specification sheets in Chapter 6.

Thank you for your support. For maximum benefit of your set, please read these
instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO HDTV.

For assistance, please call (877) 698-8462 or visit us at www.vizio.com

To purchase or inquire about accessories and installation services for your VIZIO LCD
HDTV, please visit our website at www.vizio.com or call toll free at (888) 849-4623.

We recommend you register your VIZIO HDTV either at our website www.VIZIO.com or
fill in your registration card and mail it in. For peace of mind and to protect your
investment beyond the standard warranty, VIZIO offers on-site extended warranty service plans. These plans give additional coverage during the standard warranty period. Visit our website or call us to purchase a plan.
Write down the serial number located on the back of your HDTV.


Purchase Date _________

VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.

TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs, Inc. This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for Energy Star rating.

THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS; IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. VIZIO, THE V LOGO, WHERE VISION MEETS VALUE AND OTHER VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC. PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. © 2010 VIZIO INC. ALL RIGHTS RESERVED.

Important Safety Instructions
Your HDTV is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference.

  • To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your HDTV.
  • Unplug the power cord before cleaning your HDTV. A damp cloth is sufficient for cleaning your HDTV. Do not use a liquid or a spray cleaner for cleaning your HDTV. Do not use abrasive cleaners.
  • Always use the accessories recommended by the manufacturer to insure compatibility.
  • When moving your HDTV from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your HDTV to avoid causing fire, electric shock, or component damage.
  • Use only with the cart, stand, tripod, bracket, or table specified by manufacturer or sold with your HDTV. When a cart is used, use caution when moving the cart/HDTV combination to avoid injury from tip-over. Do not place your HDTV on an unstable cart, stand, or table. If your HDTV falls, it can injure a person and cause serious damage to your HDTV. Use only a cart or stand recommended by the manufacturer or sold with your HDTV.
  • A distance of at least 3 feet should be maintained between your HDTV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your HDTV close to smoke. Operating your HDTV close to smoke or moisture may cause fire or electric shock.
  • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your HDTV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your HDTV in a bookcase or cabinet unless proper ventilation is provided.
  • Never push any object into the slots and openings on your HDTV cabinet. Do not place any objects on the top of your HDTV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your HDTV.
  • Your HDTV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
  • Do not apply pressure or throw objects at your HDTV. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
  • The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.
  • Your HDTV is equipped with a three-pronged grounded plug (a plug with a third grounding pin). This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the three-pronged, have an electrician install the correct outlet, or use an adapter to ground your HDTV safely. Do not defeat the safety purpose of the grounded plug.
  • When connected to a power outlet, power is always flowing into your HDTV. To totally disconnect power, unplug the power cord.
  • The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your HDTV that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying your HDTV.
  • Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
  • The wall socket should be installed near your HDTV and easily accessible.
  • Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock
  • Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
  • Unplug your HDTV during a lightning storm or when it will not be used for long period of time. This will protect your HDTV from damage due to power surges.
  • Do not attempt to repair or service your HDTV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.
  • Keep your HDTV away from moisture. Do not expose your HDTV to rain or moisture. If water penetrates into your HDTV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
  • • Do not use your HDTV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your HDTV yourself.
  • Avoid using dropped or damaged appliances. If your HDTV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your HDTV may cause fire or electric shock.
  • Do not install your HDTV in an area with heavy dust or high humidity. Operating your HDTV in environments with heavy dust or high humidity may cause fire or electric shock.
  • Follow instructions for moving your HDTV. Ensure that the power cord and any other cables are unplugged before moving your HDTV.
  • When unplugging your HDTV, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your HDTV will not be used for an extended period of time, unplug the power cord.
  • To reduce risk of electric shock, do not touch the connector with wet hands.
  • • Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator.
  • If any of the following occurs, contact the dealer:
  • o The power cord fails or frays.
  • o Liquid sprays or any object drops into your HDTV.
  • o Your HDTV is exposed to rain or other moisture.
  • o Your HDTV is dropped or damaged in any way.
  • o The performance of your HDTV changes substantially.

Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.

Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.

FCC Bulletin for New TV Owners
The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting. Analog-only TVs should continue to work as before to receive low power, Class A or translator television stations and with cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products.
For additional information, please contact the parties listed below, as appropriate:

FCC (US Federal Communications Commission)
http://www.fcc.gov/
Phone: 1-888-CALL-FCC (1-888-225-5322)
TTY: 1-888-TELL-FCC (1-888-835-5322)
Fax: 1-866-418-0232
E-mail: fccinfo@fcc.gov
NTIA (National Telecommunications and Information Administration)
http://www.ntia.doc.gov/
1-888-DTV-2009
Listings of US Television Stations
http://www.high-techproductions.com/usTVstations.htm
Note: Your HDTV comes with a built-in tuner capable of processing digital broadcasts. No extra converter box is needed.

Opening the Package
Your VIZIO HDTV and accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that your HDTV is in good condition and that all of the accessories are included.

Due to the weights and sizes of your HDTV models, we strongly advise that you have at least 2 people to unpack and install the HDTV.

The screen can easily be scratched or broken so please handle the product gently and never place the HDTV with the glass facing downwards on a surface without protective padding.

IMPORTANT: Save the carton and packing material for future shipping.

Package Contents
VIZIO E371VA or E421VA or E470VA or E550VA
Detachable Stand Base
4 Thumbscrews (to attach Stand)
VIZIO Remote Control
Power Cord
Screen Cleaning Cloth
Quick Setup Guide
Registration Card
2 AA Batteries for the Remote Control

Caution: Do not apply pressure or throw objects at your HDTV. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.

HDTV Accessories and Services
Additional certified accessories for your HDTV are sold separately, including:

  • Wall mounts
  • High Definition cables
  • Extra or replacement remote controls
  • Sound Bars
  • Blu-ray DVD Players

VIZIO also offers installation services and extended warranty services for your HDTV.

To purchase or inquire about additional accessories and services for your VIZIO HDTV, visit our website at www.VIZIO.com or call us toll free at 877-MYVIZIO (877-698-4946).

Chapter 1 Setting Up Your HDTV

  • Read this user manual carefully before installing your HDTV.
  • For the power consumption of your HDTV, please check the specification sheet for your model in Chapter 6. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be compromised.
  • Install your HDTV on a flat surface to avoid tipping.
  • For proper ventilation, you must allow a 1” space between the back of your HDTV and the wall.
  • Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the service life of the electronic components.
  • Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent poor ventilation and excessive component damage.
  • If you want to mount your HDTV on the wall, see below for additional information.
  • Read this user manual carefully before installing your HDTV.

VIZIO offers professional installation. Contact VIZIO for more information on these services at 877- MYVIZIO (877-698-4946) or www.VIZIO.com.

Attaching the TV Stand
Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV.

To unpack the TV and stand base:

  1. Remove the remote control, batteries, and power cord
    from the foam end caps.
  2. Remove the two top foam end caps.
  3. Remove the stand base under foam end cap.
  4. Remove the TV from the box and lay it
    face down on a clean, flat surface.

Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.

To attach the TV stand base:

  1. Line up the stand neck (attached to the TV) with the stand base.
  2. Push the stand base onto the stand neck.
  3. On the bottom of the base, insert the included (Qty. 4) thumbscrews and tighten it.
  4. Move the TV into an upright position.

Caution: Do not apply pressure to the screen or throw objects at your HDTV. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.

Wall Mounting Your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow the instructions below.

  1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to have it handy if you need to call for support.
  2. Remove the stand base and neck:
    a. Disconnect the cables from your HDTV.
    b. Place your HDTV face down on a soft,flat surface to prevent damage to the screen.
    c. Remove the TV stand base per above instructions.
  3. Mount your HDTV on the wall:
    a. Attach your HDTV to a wall mount(sold separately) using the mounting holes in the back panel of your HDTV (see illustration at the right).
    b. Read the instructions that came with your specific wall mount to properly hang your HDTV.

NOTE: If using wall mounts different from our certified ones, please verify that they are
UL/CSA/ETL listed wall mount brackets with suitable weight specs.

Preparing your LCD HDTV for Wall Mounting
Your VIZIO HDTV can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the TV on the wall, please follow the instructions below for removing the stand.

To remove the base stand:

  1. Unplug all cables from the HDTV.
  2. Place your HDTV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
  3. Remove the total of eight (4) screws holding the base stand to the TV.
  4. Carefully remove the stand, pulling the base towards you.

The TV can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang your TV.

The pitch of the mounting holes is 200mm horizontally and 200mm vertically. The screw type required is metric M6, .8mm pitch. The length of the screws will depend on the thickness plate being attached to the TV.

To find the perfect mount for your HDTV, browse VIZIO’s certified mount selection at www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).

Chapter 2 Basic Controls and Connections Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when powered on and it will get dimmer when powered off.

REMOTE CONTROL SENSOR and LIGHT
SENSOR – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal.
The light sensor allows controlling the adjustment of the backlight intensity automatically by sensing the ambient lighting, this is a feature selectable through the OSD menu.

Questions about your Manual? Post in the comments!

Fazlul Haque

Share
Published by
Fazlul Haque

Recent Posts

Merkury, Sierra Water Resistant Bluetooth Speaker User Manual

USER MANUAL SIERRA WATER RESISTANT SPEAKER Model: MI-S047B-101 INCLUDES: • SIERRA Speaker • Micro USB…

1 day ago

Parrico Thermal Imager User Manual PTI-NKH1

USER MANUAL Parrico Thermal Imager Model: PTI-NKH1 PTI-NKH1-01 Thermal Imager Operating Instruction Screen Elements Date…

2 days ago

Elehot A089 TWS Bluetooth Speaker User Manual

USER MANUAL Elehot TWS Bluetooth Speaker Model: A089 InstructionsBefore operation this unit, please read this…

2 days ago

Sky Labs ROK1 CART-I Smart Ring User Manual

USER MANUAL Sky Labs ROK1 Smart Ring Model: CART-I Thank you for choosing CART-I. Please…

2 days ago

Sharper Image Wireless Earbuds User Manual [XO-9656-2]

USER MANUAL Sharper Image True Wireless EarbudsModel: XO-9656-2 Before You Begin… Caution To ensure safe…

2 days ago

Philips NeoViu D1 User Manual

USER MANUAL Philips NeoViu Model: D1 Quick Reference Guide Please read the user manual before…

2 days ago