PLASTIC PAIL LID
TO ATTACH LID
Using proper closing equipment, such as a plate or roller closure, is recommended. If this equipment is not available, follow the instructions below.
ALIGN AND SECURE LID
- Place lid on top of container make sure container rim and lid are lined up.
- Use a rubber mallet to tap down the lid starting at point 1.
- Work clockwise around the lid tapping down each numbered point until the lid snaps in place.
Documents / Resources
|ULINE S-9943, S-21382 Plastic Pail Lid With Spout [pdf] Installation Guide|
S-9943, S-21382, Plastic Pail Lid With Spout