Car FM Transmitter with Bluetooth Function URZ0486
Safety Instructions
- Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
- Use only authorized accessories.
- Do not use this device if it has been damaged or its operation is abnormal.
- Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for check-up/repair.
- ALWAYS disconnect the device from power supply before cleaning.
- Clean this device with a soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
Product Description
The device is a car FM transmitter with Bluetooth functionality. It features a compact design and multiple ports for charging and audio output.
Key Components:
- LED Display
- USB-C Port (Power Delivery)
- USB-A Port (Quick Charge)
- Phone Button
- Microphone
- AUTO Button
- Knob (for volume/tuning)
- Previous Track Button
- Next Track Button
- AUX Output (3.5mm jack)
Installation
- Plug the FM transmitter into the car charger socket.
- Upon connection, the LED display will show the car battery voltage for a few seconds, then display "bt" to indicate it is in Bluetooth pairing mode.
Bluetooth Pairing
- Enable Bluetooth function on your external device (e.g., smartphone) and search for new Bluetooth devices.
- Select and connect with this device (URZ0486). If prompted, enter the password "0000" or "1234".
- When an incoming call is received while music is playing, the device will automatically switch to the call.
FM Transmitter Operation
Auto-scan Mode:
- Press the AUTO button to start automatic frequency searching.
- Tune your car radio to the same frequency found by the transmitter.
Manual Mode:
- Tune your car radio to an unused FM frequency.
- Double-press the AUTO button to enter manual tuning mode.
- Turn the knob on the device to match the same frequency as your car radio.
Music Playback
- Press the Phone Button to play or pause music.
- Press the buttons on the back of the device to skip to the previous or next song.
- Turn the knob to adjust the volume.
Call Management
- Press the Phone Button to answer or end an incoming call. Press and hold to reject a call.
- Press the Phone Button twice to redial the last number.
- During a call, press and hold the Phone Button to switch to a private conversation with your smartphone.
Voice Assistant Activation
- When in Bluetooth mode, press and hold the Phone Button to activate your smartphone's voice assistant (if supported by the smartphone).
Charging
- Connect your device using a USB cable (not included) to one of the two USB charging ports (USB-A or USB-C).
Power On/Off
- Press and hold the AUTO button for approximately 2 seconds to turn off FM transmission, LED display, and Bluetooth function, leaving only the charging capability active.
- Press and hold the AUTO button again for approximately 2 seconds to turn the device back on.
AUX Output
- When Bluetooth is connected, use the supplied 3.5 mm jack cable to connect this device to the AUX input of your car's head unit.
Technical Specifications
Feature | Specification |
---|---|
LED Display | 0.74" |
Microphone | Built-in |
Call Management | Supported |
Voltage Tester | Supported |
Material | ABS + Aluminum |
Bluetooth Version | 5.1 |
Bluetooth Range | Up to 7 m |
Bluetooth Profiles | AVRCP, HFP, A2DP |
Audio Formats | MP3, WAV, APE, FLAC |
Frequency Range (FM) | 87.6 – 107.9 MHz |
Frequency Stability (FM) | ±10 ppm |
USB Charging Ports | 2x (USB-C Power Delivery: max 24 W, USB-A Quick Charge: max 18 W) |
AUX Output | Yes |
Power Supply | 12 – 24 V |
Included Accessories | 3.5 mm jack cable |
Weight | 55.7 g |
Dimensions | 56 x 40 x 103 mm |
Declaration of Conformity
Lechpol Electronics Leszek Sp.k. hereby declares that the Car FM transmitter with Bluetooth function URZ0486 is in compliance with Directive 2014/53/UE. The full text of the EU Declaration of Conformity is available at: www.lechpol.pl.
This product complies with CE and RoHS standards.
Correct Disposal of Product (Waste Electrical & Electronic Equipment)
This marking on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact their retailer or local government office for details on environmentally safe recycling. Business users should contact their supplier and check contract terms. This product should not be mixed with other commercial wastes.
Manufactured in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.