Satel APSP-402 REPEATER PANEL
FIRE ALARM SYSTEMS / ACSP System / Remote repeater panels
Product Overview
The repeater panel is designed for the remote operation of the ACSP addressable fire alarm control panel. The APSP-402 control panel can be connected with one APSP-402 repeater panel. The panel may be installed inside a protected facility, within 1,000 meters from the control panel.
Key Features:
- Remote control of the control panel on levels 1 and 2 using the front panel.
- Connection to the control panel over the RS-485 communication bus.
- LEDs for signalling the status of the control panel.
- LCD display for:
- Presenting information about the alarm.
- Presenting messages.
- Viewing the list of current disablement, test, or failure conditions.
- Viewing the history of alarms and other events.
- Built-in piezo transducer for acoustic signalling.
- Switching mode power supply APS-318 included.
- Enclosure with a space for a 12 V / 7 Ah battery.
- Automatic switching to back-up power supply (battery) in case of failure of the main power supply.
Visual Description
A white, rectangular fire alarm repeater panel with a red and white interface. The front features a grid of buttons, several indicator LEDs (red, yellow, green), and an LCD screen. A prominent red circular logo with a flame-like symbol is centered below the screen.
Technical Data
| Technical Data | Value |
|---|---|
| Operating temperature range | -5...+40°C |
| Supply voltage (±15%) | 230 V AC, 50-60 Hz |
| Maximum humidity | 93±3% |
| Dimensions | 324 x 382 x 108 mm |
| Maximum current consumption from the 230V network | 250 mA |
| Transit temperature range | -25...+55°C |
| Operating duration of the stand-by supply | 72 h |
| Maximum internal apparent resistance of the battery (with cables and terminals in a circuit) | 1,1±10% Ω |
| Current draw from the battery when detecting | 65 mA |
| Current draw from the battery when emitting an alarm | 75 mA |
| Current draw from an integrated AC power adapter when detecting | 60 mA |
| Current draw from an integrated AC power adapter when emitting an alarm | 70 mA |
| Sealing of the casing | IP30 |
| Stand-by supply: internal acid battery | 12 V / 17 Ah |
| Maximum battery charging current | 1,4 A |
CE (European Conformity)
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Website: www.satel.eu
ACSP-402 Fire alarm control panel
TCPDF
