ATOMSTACK P1 5W Laser Engraver Instruction Manual

1. Вступ

The ATOMSTACK P1 is a portable 5W diode laser engraver and cutter designed for precision work on various materials. This manual provides essential information for the safe and effective use of your device, including setup, operation, maintenance, and troubleshooting.

Image 1.1: The ATOMSTACK P1 laser engraver, showcasinйого компактний дизайн таample engraved items.

1.1 Основні характеристики

• 5W Diode Laser: Підходить для гравірування та різання широкого спектру матеріалів.
• Універсальна сумісність матеріалів: Engraves wood, bamboo, paper, leather, cardboard, cork, stone, and more.
• AtomStack Software: Free, user-friendly software with design library and material parameter recommendations. Compatible with LightBurn (sold separately).
• Висока точність: CoreXY structure and dual motor drive for up to 0.1mm positioning accuracy.
• Компактний і портативний: Engraving area of 110×110mm, footprint 265×303×185mm, weight approximately 3kg.
• Високошвидкісне гравіювання: Up to 10,000mm/min.
• Функції безпеки: Fully enclosed design with visible window, built-in focus bar, USB safety interlock, secure enclosure detection, and gyro-based tilt detection.

2. Правила безпеки

Operating a laser engraver requires adherence to strict safety protocols to prevent injury and damage. Read and understand all safety instructions before operating the ATOMSTACK P1.

2.1 Загальні заходи безпеки

• Захист очей: Always wear appropriate laser safety glasses when the laser is active and the enclosure is open. The P1 features a visible window for observation, but direct exposure to the laser beam can cause permanent eye damage.
• Вентиляція: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving.
• Легкозаймисті матеріали: Do not engrave highly flammable materials without proper precautions. Keep a fire extinguisher nearby.
• Нагляд: Never leave the engraver unattended during operation.
• Діти та домашні тварини: Тримайте дітей і домашніх тварин подалі від робочої зони.
• Джерело живлення: Use only the provided power adapter. Ensure the power supply is stable and correctly grounded.

2.2 Вбудовані функції безпеки

• Повністю закритий дизайн: The P1 features a fully enclosed design with an orange visible window to contain laser light and fumes.
• Lid-Open Safety Stop: The engraving process automatically pauses if the lid is opened during operation.
• Виявлення безпечного корпусу: Ensures the enclosure is properly closed before operation.
• Виявлення нахилу на основі гіроскопа: Automatically stops operation if the machine is tilted or moved unexpectedly.
• Захисне блокування USB: Prevents operation if the USB connection is interrupted.

Зображення 2.1: закінченоview of the ATOMSTACK P1's safety features, including the enclosed design and various detection systems.

3. Вміст упаковки

Upon unboxing your ATOMSTACK P1, verify that all components are present and undamaged. Refer to the packing list included with your device for a complete inventory.

4. Налаштування

The ATOMSTACK P1 is designed for quick setup. Follow these steps to prepare your engraver for its first use.

4.1 Початкове розміщення

• Розмістіть гравер на стійкій, рівній поверхні.
• Ensure adequate clearance around the machine for ventilation and access.

4.2 Підключення живлення

1. Connect the power adapter to the engraver's power input port.
2. Підключіть адаптер живлення до відповідної електричної розетки.
3. Turn on the main power switch, usually located on the side or back of the unit.

4.3 Laser Module Installation/Replacement

If your laser module is not pre-installed or needs replacement, follow these instructions:

1. Ensure the engraver is powered off and unplugged.
2. Carefully remove the existing laser module or access the installation slot.
3. Align the new laser module with the mounting mechanism and secure it in place.
4. Connect any necessary cables to the laser module.

5. Інструкція з експлуатації

The ATOMSTACK P1 can be operated using the dedicated AtomStack Studio software or a compatible third-party application like LightBurn.

5.1 Встановлення та підключення програмного забезпечення

Download and install the AtomStack Studio software from the official ATOMSTACK website or app store. The software supports Windows/macOS (USB) and iOS/Android (WiFi/AP).

Image 5.1: The AtomStack Studio software interface shown across multiple devices, highlighting its user-friendly design.

5.1.1 Connecting via AtomStack App (WiFi/AP)

1. Ensure your P1 is powered on.
2. Open the AtomStack app on your iOS or Android device.
3. Follow the in-app instructions to connect to the P1 via WiFi or Access Point (AP) mode.

5.1.2 Connecting via AtomStack Studio Software (USB)

1. Connect the P1 to your Windows or macOS computer using the provided USB cable.
2. Open the AtomStack Studio software.
3. The software should automatically detect the connected device. If not, follow the software's connection prompts.

5.1.3 Connecting via LightBurn Software (USB)

The P1 is compatible with LightBurn software (purchased separately). Refer to LightBurn's documentation for specific connection instructions.

5.2 Процес гравіювання

1. Підготуйте матеріал: Place the material to be engraved or cut onto the working platform. Ensure it is flat and securely positioned.
2. Регулювання фокусу: Use the built-in focus bar to achieve precise focus. This ensures optimal engraving quality.
3. Design Selection: In the AtomStack Studio software or app, select or create your desired design.
4. Параметри параметрів: Adjust engraving parameters (power, speed, passes) based on the material type. The software provides recommended settings.
5. попередньоview та посада: Use the framing function to preview the engraving area on your material. Adjust the material or design position as needed.
6. Почати гравірування: Close the enclosure lid and initiate the engraving process from the software or app. The machine will automatically pause if the lid is opened during operation.

Зображення 5.5: Крупний план view of the ATOMSTACK P1 performing a detailed engraving, demonstrating its precision.

6. Використання аксесуарів

The ATOMSTACK P1 supports various accessories to expand its capabilities, such as rotary chucks and rollers for cylindrical objects.

6.1 Using the R8 Rotary Chuck

The R8 Rotary Chuck (sold separately) allows for engraving on cylindrical objects. Ensure the chuck is properly installed and configured in the software.

6.2 Using the R6 Rotary Roller

The R6 Rotary Roller (sold separately) is another accessory for engraving cylindrical items. Adjust the roller gap as needed for different object diameters.

Image 6.3: The ATOMSTACK P1 shown with optional accessories, including rotary chucks, rotary rollers, and an air purifier.

7. Технічне обслуговування

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P1.

7.1 Очищення

• Лазерна лінза: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain engraving quality.
• Робоча зона: Remove debris and dust from the engraving platform and interior of the machine after each use.
• Зовні: Протріть зовнішні поверхні рекламоюamp тканина. Не використовуйте агресивні хімікати.

7.2 Laser Module Care

The laser module is a critical component. Handle it with care and refer to the replacement instructions if necessary.

8. Вирішення проблем

This section addresses common issues you might encounter with your ATOMSTACK P1.

8.1 Поширені проблеми та рішення

9. Технічні характеристики

Technical specifications for the ATOMSTACK P1 5W Laser Engraver.

Image 9.1: Detailed specifications and material compatibility chart for the ATOMSTACK P1, including both single and dual laser versions.

10. Гарантія та підтримка

For warranty information, technical support, or service inquiries, please refer to the official ATOMSTACK webсайт або зверніться безпосередньо до служби підтримки клієнтів. Зберігайте чек про покупку для гарантійних претензій.

• Офіційний Webсайт: Visit the ATOMSTACK official webсайт для отримання найновіших ресурсів підтримки, поширених запитань та контактної інформації.
• Обслуговування клієнтів: Contact ATOMSTACK customer support for assistance with product issues or technical guidance.