IHSENO Tuya WiFi Motion Sensor (Chang Miton Sensor) Instruction Manual

1. Вступ

Thank you for choosing the IHSENO Tuya WiFi Motion Sensor. This device is designed to enhance your home security and automation by detecting human presence and movement. It integrates seamlessly with the Tuya Smart Life App, allowing for remote monitoring and control. Please read this manual carefully before installation and use to ensure proper operation and maximize the sensor's capabilities.

2. Продукт закінчивсяview і особливості

The IHSENO Tuya WiFi Motion Sensor is a Passive Infrared (PIR) detector that identifies human presence and movement within its detection range. Key features include:

• APP Remote Control: Monitor your home's security from anywhere using the mobile application.
• Виявлення руху: Capable of detecting various human movements, from walking to subtle gestures.
• Static Human Presence Detection: Advanced detection allows the sensor to identify human presence even when there is no active movement (e.g., sitting still).
• Журнал активності: Review historical records of detected human presence directly through the app.
• Регульовані параметри: Customize settings such as detection distance and sensitivity via the mobile application.
• Зв'язок сцени: Integrate with other Tuya smart devices for automated actions (e.g., turning on lights when motion is detected).
• Сигналізація низької потужності: Receive notifications when the battery level is low, prompting a battery change.
• Wide-Angle Infrared Detection: Features a 105° horizontal and 105° vertical detection angle, with a maximum detection distance of 6 meters (20 feet).

Figure 2.1: The IHSENO Tuya WiFi Motion Sensor and its remote monitoring capabilities via the mobile app, displaying a 'Someone alarm' notification.

Figure 2.2: Illustrations of the sensor's integration with smart cameras, automatic lighting, mobile notifications, and siren alarms for enhanced security.

Малюнок 2.3: Детально view of the sensor's 105° wide-angle infrared detection capabilities, including horizontal and vertical detection ranges and a 6-meter detection distance.

Figure 2.4: The motion sensor demonstrating scene linkage with various Tuya smart devices, enabling integrated smart home automation.

3. Вміст упаковки

Будь ласка, перевірте упаковку на наявність наступних предметів:

• 1 x датчик руху PIR
• 1 x Посібник користувача (цей документ)
• 1 х Двосторонній клей

Note: AAA Alkaline batteries are required but not included in the package.

4. Технічні характеристики

5. Посібник із налаштування

5.1 Встановлення батареї

1. Gently open the back cover of the PIR motion sensor.
2. Insert the required AAA Alkaline batteries (not included), ensuring correct polarity (+/-).
3. Надійно закрийте задню кришку.

Figure 5.1: The sensor is powered by AAA Alkaline batteries. Ensure batteries are installed correctly.

5.2 Завантаження програми та створення облікового запису

1. Завантажити Туя Смарт or Розумне життя додаток з магазину додатків вашого смартфона (iOS App Store або Google Play Store).
2. Зареєструйте новий обліковий запис або увійдіть, якщо у вас вже є обліковий запис.

5.3 Сполучення пристроїв

1. Переконайтеся, що ваш смартфон підключено до Мережа Wi-Fi 2.4 ГГц. The sensor does not support 5GHz WiFi.
2. Відкрийте додаток Tuya Smart або Smart Life.
3. Натисніть значок «+» у верхньому правому куті, щоб додати пристрій.
4. Select "Security & Video Surveillance" > "PIR Detector" or search for "Motion Sensor".
5. Follow the on-screen instructions to put the sensor into pairing mode (usually involves pressing and holding a reset button until an indicator light flashes).
6. Confirm the indicator light is flashing rapidly in the app and enter your 2.4GHz WiFi password.
7. Wait for the device to connect. Once connected, you can rename the sensor and assign it to a room.

5.4 Монтаж датчика

1. Choose a suitable location for mounting. Consider areas where human movement is expected, such as hallways, entryways, or rooms.
2. Ensure the chosen location is within the sensor's detection range (up to 6 meters) and has a clear line of sight.
3. Ретельно очистіть монтажну поверхню.
4. Peel off the protective film from the double-sided adhesive provided.
5. Attach the adhesive to the back of the sensor and then firmly press the sensor onto the desired wall or surface.

6. Інструкція з експлуатації

6.1 Віддалений моніторинг через застосунок

Once paired, you can monitor the sensor's status and receive alerts directly on your smartphone through the Tuya Smart or Smart Life app. The app will display real-time notifications when motion or presence is detected.

6.2 Adjusting Sensor Parameters

Within the app, navigate to the sensor's settings to customize its behavior:

• Чутливість до PIR: Adjust the sensitivity level (e.g., Low, Middle, High) to prevent false alarms or ensure detection of subtle movements.
• Keep Time (Cooldown Time): Set the duration for which the sensor remains in a 'triggered' state after detection. This prevents repeated triggers within a short period. The shortest setting can be 30 seconds, and the longest 120 seconds.
• Сигналізація руху: Enable or disable motion detection alerts.
• Lower Battery Notification: Turn on/off alerts for low battery status.
• SMS/Phone Notification: Configure additional notification methods (may require subscription or specific regional services).

Figure 6.1: Screenshot of the app interface showing adjustable parameters for the motion sensor.

6.3 Scene Linkage with Other Smart Devices

Leverage the Tuya ecosystem to create smart scenes:

1. In the app, go to the "Smart" or "Automation" section.
2. Створіть нову автоматизацію.
3. Set the condition: "When device status changes" > select your motion sensor > "Motion detected".
4. Set the action: "Run the device" > select another Tuya-compatible device (e.g., a smart light, smart curtain, or smart alarm) > define the action (e.g., "Turn On", "Open").
5. Збережіть автоматизацію.

7. Технічне обслуговування

7.1 Заміна батареї

When you receive a low battery notification from the app, or if the sensor's performance degrades, replace the AAA Alkaline batteries promptly. Refer to Section 5.1 for battery installation instructions.

7.2 Очищення

To ensure optimal performance, periodically clean the sensor's lens with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the device.

8. Вирішення проблем

• Датчик не виявляє руху:
  • Check battery level in the app and replace if low.
  • Ensure the sensor is mounted correctly and has a clear line of sight.
  • Adjust PIR sensitivity settings in the app to a higher level.
  • Будьте в курсі cooldown time (Keep Time) setting. If the sensor was recently triggered, it will not re-trigger until the cooldown period has passed. This is normal operation.
• Часті хибні тривоги:
  • Adjust PIR sensitivity settings in the app to a lower level.
  • Ensure the sensor is not facing direct sunlight, heat sources, or areas with significant air currents (e.g., near vents), which can cause false triggers.
• Sensor offline in app:
  • Check your home's 2.4GHz WiFi network status.
  • Ensure the sensor is within range of your WiFi router.
  • Перевірте рівень заряду батареї та замініть її, якщо необхідно.
  • Try restarting the sensor by removing and reinserting batteries.
  • If issues persist, try re-pairing the device with the app (refer to Section 5.3).

Figure 8.1: Explanation of the sensor's cooldown time, a crucial factor in understanding its detection behavior.

9. Важливі примітки та інформація з безпеки

• This device requires a Мережа Wi-Fi 2.4 ГГц for connectivity. It is not compatible with 5GHz WiFi networks.
• The sensor has a built-in cooldown time (Keep Time) after each detection. During this period, the sensor will not re-trigger, even if further motion is detected. This is a standard feature to conserve battery life and prevent excessive notifications. The cooldown time can be adjusted in the app from 30 to 120 seconds.
• Не піддавайте пристрій впливу екстремальних температур, прямих сонячних променів або високої вологості.
• Тримайте пристрій подалі від сильних електромагнітних полів.
• Цей пристрій призначений лише для використання в приміщенні.
• Не намагайтеся розбирати або ремонтувати пристрій самостійно. У разі виникнення проблем зверніться до служби підтримки клієнтів.

10. Гарантія та підтримка

For warranty information or technical support, please refer to the seller's contact details on your purchase platform or the official IHSENO website. Please have your product model number (Chang Miton Sensor) and purchase details ready when contacting support.