NB ERGONOMIC J5

NB ERGONOMIC J5 Heavy Duty Gaming Monitor Arm Instruction Manual

Модель: J5

вступ

Thank you for choosing the NB ERGONOMIC J5 Heavy Duty Gaming Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before installation and retain it for future reference.

This monitor arm is designed to support flat, ultrawide, and curved monitors ranging from 27 to 50 inches, with a load capacity of 2 to 18 kg. It features a robust mechanical spring for flexible adjustments and ergonomic positioning.

Інформація про безпеку

Вага: Do not exceed the maximum load capacity of 18 kg (39.6 lbs). Exceeding this limit may result in instability and potential injury.
Розмір монітора: Ensure your monitor falls within the recommended size range of 27 to 50 inches.
Стабільність столу: Verify that your desk is stable and strong enough to support the combined weight of the monitor arm and your monitor.
Установка: Follow all installation steps carefully. Improper installation can lead to product failure or personal injury. If you are unsure about any step, seek professional assistance.
Рухомі частини: Be aware of pinch points when adjusting the monitor arm. Keep hands and fingers clear of moving parts.
діти: Тримайте дрібні деталі подалі від дітей, щоб запобігти небезпеці задухи.

Вміст упаковки

Будь ласка, перевірте наявність усіх компонентів та їхню неушкодженість. Якщо якісь деталі відсутні або пошкоджені, зверніться до служби підтримки клієнтів.

All components of the NB ERGONOMIC J5 monitor arm laid out on a wooden surface.

Image: All components of the NB ERGONOMIC J5 monitor arm, including the base, arm sections, VESA plate, C-clamp, grommet mount parts, and various screws and tools.

Збірка кронштейна монітора (верхній та нижній кронштейни)
Робочий стіл Клamp (C-Clamp)
Основа кріплення Grommet
Пластина VESA
Комплект кріпильних елементів (гвинти, шайби, проставки)
Інструменти (шестигранні ключі)
Інструкція з експлуатації

Технічні характеристики

Параметр	Значення
Модель	J5
Сумісність розміру екрана	від 27 до 50 дюймів
Вантажопідйомність	Від 2 до 18 кг (від 4.4 до 39.6 фунтів)
Сумісність VESA	75х75 мм, 100х100 мм
матеріал	Aluminum alloy, Cold-rolled steel, ABS
Тип монтажу	C-Clamp або люверс
Кути повороту	360°
Кути нахилу	±50°
Swivel Angles	±90°
Вертикальний підйомник	250 мм (9.8 дюйма)
Максимальне розширення	630 мм (24.8 дюйма)

Table showing product parameters including model, screen size, capacity, materials, swivel, rotation, tilt, lift, mounting method, and VESA compatibility.

Image: Detailed product parameters for the J5 monitor arm, including dimensions and adjustment ranges.

Налаштування та встановлення

1. Desk Compatibility Check

Before installation, ensure your desktop is suitable for mounting. The monitor arm supports C-Clamp та варіанти кріплення люверсів.

Diagram showing unsuitable desktop types for monitor arm installation: fragile desktops (marble, glass), desktops with too narrow clamp surface due to bottom baffle, and desktops with irregular or beveled edges.

Зображення: Прamples of desktop types unsuitable for monitor arm installation.

Unsuitable Desktops: Fragile materials like marble or glass, desktops with insufficient clamping surface due to bottom baffles, or desktops with irregular/beveled edges are not suitable.
C-Clamp тип: Requires desk thickness of 20-90mm (0.8"-3.5") and a bottom depth above 50mm (1.97").
Grommet Type: Requires desk thickness of 20-90mm (0.8"-3.5") and a hole diameter of 10-60mm (0.4"-2.3").

Diagram illustrating the requirements for Grommet type and C-Clamp type mounting, including desk thickness and hole diameter/depth.

Image: Specifications for C-Clamp та варіанти кріплення люверсів.

2. Confirm VESA Hole Position

Locate the VESA mounting holes on the back of your monitor. The monitor arm supports VESA patterns of 75x75mm and 100x100mm.

Diagram showing how to locate VESA holes on a monitor, including removing a back cover if necessary. It also shows different screw sizes (M6x10, M6x12) for mounting.

Image: Guide to finding and confirming VESA hole positions on your monitor.

If your monitor has an embedded hole, the panel can be placed directly.
If the embedded position is small or the panel cannot be placed inside, use the heightening pads and lengthened screws provided in the screw package.

3. Assemble the Desk Mount

Choose either the C-Clamp or Grommet mount based on your desk and assemble the base according to the instructions provided in the package.

Close-up image of the C-Clamp mounting mechanism attached to a desk edge.

Image: Detail of the C-Clamp кріплення на стіл.

Close-up image of the Grommet mounting mechanism installed through a desk hole.

Image: Detail of the Grommet desk mounting.

4. Прикріпіть пластину VESA до монітора

Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure it is tightly fastened.

5. Кріплення монітора до кронштейна

Slide the VESA plate with the attached monitor onto the arm's mounting head until it clicks securely into place. Ensure the monitor is firmly seated.

Diagram showing the quick installation process where the VESA plate with the monitor slides onto the arm's mounting head.

Image: Quick installation and easy disassembly of the monitor from the arm.

Вибухнув view of the monitor arm's VESA plate and arm connection, highlighting the secure attachment points.

Зображення: Детальне view of the VESA plate and arm connection for stable mounting.

Інструкція з експлуатації

1. Регулювання положення монітора

The NB ERGONOMIC J5 monitor arm offers extensive flexibility for optimal viewкомфорту.

Diagram illustrating the various adjustment capabilities of the monitor arm: Tilt (±50°), Rotation (±90°), Swivel (360°), and Arm Rotation (360°).

Image: Full range of motion for the monitor arm, including tilt, swivel, and rotation.

Регулювання висоти: The arm allows for a vertical lift of up to 250mm (9.8 inches). Gently push or pull the monitor to the desired height.

сторона view of the monitor arm demonstrating the vertical lift range of 9.8 inches (250mm).

Image: Vertical lift capability of the monitor arm.

Розширення: The arm can extend up to 630mm (24.8 inches) from the base.

З верху до низу view of the monitor arm showing its maximum extension of 24.8 inches (630mm) and highlighting the internal mechanical spring mechanism.

Image: Maximum extension of the monitor arm and its mechanical spring.

Нахил: Adjust the monitor tilt from -50° to +50° to reduce glare and optimize viewкути.
Поворотний: Поверніть монітор на ±90° по горизонталі.
Обертання: Поверніть монітор на 360° для портретної або альбомної орієнтації.

2. Регулювання натягу

The monitor arm features a mechanical spring for smooth adjustments. The tension may need to be adjusted based on your monitor's weight to ensure it holds its position.

Diagram showing the tension adjustment screw on the monitor arm. Instructions indicate turning '+' to increase tension for heavier monitors and '-' to reduce tension for lighter monitors. A note advises to hang the monitor before adjustment.

Image: Guide for adjusting the arm's tension.

Важливо: Always attach your monitor to the arm before adjusting the tension.
Якщо монітор піднімає on its own, turn the tension screw in the '–' direction to reduce tension for a lighter monitor.
Якщо монітор падає, turn the tension screw in the '+' direction to increase tension for a heavier monitor.
Use the provided Allen wrench to make small, incremental adjustments until the monitor stays in the desired position.

3. Кабельний менеджмент

The monitor arm includes integrated cable management channels to keep your workspace tidy and organized.

Image showing cables routed neatly through the integrated cable management channels of the monitor arm, leading to a clean desk setup.

Image: Organized cable management feature of the monitor arm.

Route your display and power cables through the designated cable slots along the arm.
This helps protect cables and reduces clutter on your desktop.

Технічне обслуговування

Прибирання: Протріть кронштейн монітора м’якою тканиноюamp тканиною. Уникайте використання абразивних засобів для чищення або розчинників, які можуть пошкодити покриття.
Періодичні перевірки: Періодично перевіряйте всі гвинти та з'єднання, щоб переконатися, що вони міцно затягнуті. За потреби підтягніть.
Змащення: The mechanical spring mechanism is designed for long-term use and generally does not require lubrication. If you notice any stiffness, contact customer support.

Усунення несправностей

Monitor does not stay in position (sags or floats): This indicates incorrect tension adjustment. Refer to the "Tension Adjustment" section and adjust the spring tension using the provided Allen wrench until the monitor holds its position. Remember to adjust with the monitor attached.
Arm is difficult to move: The tension might be too high for your monitor's weight, or the pivot points might be stiff. Try reducing the tension slightly. If stiffness persists, ensure all assembly bolts are not overtightened.
Монітор хитається: Ensure all mounting screws (VESA plate to monitor, arm to base, and base to desk) are securely tightened. Check that your desk is stable.
Відсутні деталі або пошкоджені компоненти: Do not proceed with installation. Contact NB ERGONOMIC customer support immediately for assistance.

Гарантія та підтримка

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official NB ERGONOMIC website. If you encounter any issues or have questions regarding your J5 monitor arm, our support team is available to assist you.

Виробник: KUNSHAN HONGJIE ELECTRONICS CO., LTD

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.