вступ
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your TAVOSOP 2.4GHZ Wireless XLR Transmitter and Receiver system. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Налаштування
Що в коробці
Перевірте наявність усіх компонентів в упаковці:
- 1 х приймач
- 2 х передавачі
- 1 x 6.35mm to XLR plug
- 2 кабель для зарядки
- 1 х посібник користувача
Продукт закінченийview (Components and Controls)
The system consists of a receiver and two transmitters. Each unit features an LED display for power and frequency signal, a power button, and a charging interface.
Заряджання пристроїв
The transmitter and receiver units are equipped with built-in rechargeable lithium batteries. Use the provided USB cables to charge the devices. Connect the charging cable to the DC 5V charging interface on each unit and plug the other end into a standard USB power source (e.g., computer USB port, USB wall adapter).
A full charge typically provides 5-8 hours of operating time.
Початкове сполучення та підключення
The TAVOSOP wireless system is designed for plug-and-play operation. The transmitter and receiver should automatically pair when powered on. Ensure both units are charged before use.
- Увімкнення: Press and hold the power button on both the receiver and each transmitter until the LED display illuminates.
- Автоматичне сполучення: The units will automatically search for and connect to each other. The display on the receiver will show the channel and frequency when connected.
- Підключення до аудіообладнання: Plug the receiver into the input of your audio mixer, amplifier, or other compatible device. Plug the transmitter into your dynamic microphone or electric guitar/bass.
Інструкція з експлуатації
Підключення до звукового обладнання
The TAVOSOP system is versatile and can be used with various audio devices:
- Динамічні мікрофони: Connect the transmitter directly to the XLR output of your dynamic microphone.
- Electric Guitar/Bass: Use the included 6.35mm to XLR plug to connect the transmitter to your instrument's output.
- Audio Mixers/Ampліферів: Plug the receiver into an available XLR or 6.35mm input on your audio mixer, PA system, or ampліфірник.
Увімкнення/вимкнення та вибір каналу
To power on or off, press and hold the power button on each unit. The LED display will show the current channel (CH) and frequency (MHz). If interference occurs or you need to use multiple sets, you can change the channel by briefly pressing the power button on the receiver. The system supports multiple sets operating simultaneously without interference.
Поради щодо використання
- Ефективний діапазон: The wireless system provides an effective transmission range of approximately 30 meters (100 feet). Maintain line of sight for optimal performance.
- Low Noise and Latency: The 2.4G uncompressed wireless signal transmission ensures low noise and minimal latency for clear audio.
- Multiple Sets: Multiple TAVOSOP wireless systems can be used in the same area without interfering with each other, making it suitable for complex setups.
Технічне обслуговування
Догляд за акумулятором
Щоб максимально збільшити термін служби та продуктивність акумулятора:
- Fully charge the devices before first use.
- Уникайте частої повної розрядки акумулятора.
- If storing for an extended period, charge the batteries to about 50% and recharge every few months.
- Use only the provided charging cables or certified equivalents.
Очищення та зберігання
Keep the devices clean and dry. Use a soft, dry cloth to wipe down the units. Avoid using harsh chemicals or abrasive materials. Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Усунення несправностей
- Немає вихідного звуку:
рішення: Ensure both the transmitter and receiver are powered on and fully charged. Check that the receiver is securely plugged into the audio input of your mixer/amplifier and the transmitter into your microphone/instrument. Verify that the volume levels on your audio equipment are appropriately set. Confirm that the transmitter and receiver are paired (indicated by the display). - Перешкоди або статичний шум:
рішення: This system operates on the 2.4GHz band, which can be susceptible to interference from Wi-Fi routers, other wireless devices, or microwave ovens. Try changing the channel on the receiver. Ensure the transmitter and receiver are within the effective range (approx. 30 meters) and have a clear line of sight. Move away from potential sources of interference. - Короткий термін служби батареї:
рішення: Ensure the devices are fully charged before each use. Battery performance can degrade over time; if the issue persists, consider the age of the unit. - Пристрої, що не сполучаються:
рішення: Power off both the transmitter(s) and receiver, then power them back on. Allow a few seconds for automatic pairing. If they still do not pair, try manually changing the channel on the receiver.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | 1 receive + 2transmit |
| Бренд | TAVOSOP |
| Технологія підключення | Wireless (2.4GHZ UHF) |
| Тип роз'єму | XLR |
| Кількість каналів | 2 |
| Джерело живлення | Працює від батареї |
| Тип батареї | Літій-іонний (3 в комплекті) |
| Вага товару | 0.14 кілограма (5 унції) |
| Розміри упаковки | 6.69 x 4.76 x 1.46 дюймів |
| Включені компоненти | Передавач і приймач |
| Рекомендоване використання | Karaoke, Dynamic Microphones, Audio Mixers, Electric Guitar/Bass |
Гарантія та підтримка
Інформація про гарантію
For specific warranty details, please refer to the documentation provided with your purchase or contact the seller directly. Standard return policies typically allow for refunds or replacements within 30 days of purchase.
Підтримка клієнтів
If you encounter any issues or have questions regarding your TAVOSOP wireless system, please contact the seller or manufacturer for assistance. Provide your product model number and purchase date when seeking support.