EpheyFIF 1112212770

ATS-25Max Si4732A10 Full Radio Receiver Kit User Manual

Model: 1112212770 | Brand: EpheyFIF

1. Вступ

Welcome to the user manual for your ATS-25Max Si4732A10 Full Radio Receiver Kit. This manual provides detailed instructions on setting up, operating, and maintaining your device to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Ключові характеристики:

  • CW, RTTY F4, F8 Decoding Function with four audio spectrums.
  • Optimized microcontroller memory for faster interface speed.
  • Improved frequency display accuracy on the audio spectrum.
  • Multi-language support including Brazilian Portuguese, French, and Polish.
  • Supports 2.4-inch touch screen functionality.
  • Direct frequency input via numeric keypad.
  • Adjustable AM bandwidth (1-6 KHz) and SSB bandwidth (0.5-4.0 KHz).
  • Built-in 3.7V/3000mA lithium battery with Type-C charging.
  • 3.5mm stereo audio output and BNC antenna interface.

2. Вміст упаковки

Будь ласка, перевірте, чи всі перелічені нижче предмети входять до вашої упаковки:

  • 1 x ATS-25Max Host Unit
  • 1 x Short Whip Antenna
  • 1 x Telescopic Rod Antenna
  • 1 x Touch Stylus
  • 1 кабель для заряджання Type-C
  • 1 x Set of Corner Protective Pads
ATS-25Max Radio Receiver and included accessories

Image: The ATS-25Max receiver unit along with its accessories, including two antennas, a stylus, a USB-C charging cable, and small clear protective pads.

3. Продукт закінчивсяview

Familiarize yourself with the components and interfaces of your ATS-25Max receiver.

Фронт view of ATS-25Max Radio Receiver with antennas

Зображення: спереду view of the ATS-25Max receiver, showing the 2.4-inch touch screen display, control buttons, tuning knob, and two attached antennas (one telescopic, one stubby).

ATS-25Max Radio Receiver with dimensions

Image: The ATS-25Max receiver with indicated dimensions: 11.2 cm in width and 11.7 cm in height (including the telescopic antenna fully extended).

Інтерфейси задньої панелі:

Rear panel of ATS-25Max Radio Receiver

Image: Close-up of the rear panel of the ATS-25Max receiver, showing the USB Type-C port for charging and data, a power ON/OFF switch, a 3.5mm headphone jack, and a BNC antenna connector with an AUTO/SSB/LW/MW/FM/SW switch.

  • USB Charge/Download Port: Type-C interface for charging the internal battery and for firmware updates/data transfer.
  • Вимикач живлення: Вмикає/вимикає живлення пристрою.
  • Phone Head (3.5mm Audio Jack): Для підключення навушників або зовнішніх аудіопристроїв.
  • ANT (BNC Connector): Main antenna input.
  • Antenna Mode Switch: Selects between AUTO, SSB, LW, MW, FM, and SW antenna modes.

4. Налаштування

4.1 Заряджання батареї

  1. Connect the supplied Type-C charging cable to the USB Charge/Download port on the rear of the receiver.
  2. Підключіть інший кінець кабелю до стандартного USB-адаптера живлення (не входить до комплекту) або USB-порту комп’ютера.
  3. The LED charge indicator will illuminate during charging. A full charge takes approximately 2-3 hours.

4.2 Підключення антени

  1. Select the appropriate antenna for your desired frequency band (e.g., telescopic rod antenna for SW/FM, short whip antenna for general use).
  2. Attach the antenna to the BNC connector on the rear panel by aligning the connector and twisting to lock.
  3. Ensure the Antenna Mode Switch is set to the correct band (e.g., SW for shortwave, FM for FM radio).

4.3 Початкове ввімкнення

  1. After charging and connecting the antenna, slide the Power ON/OFF switch to the 'ON' position.
  2. The 2.4-inch touch screen will power on and display the main interface.

5. Інструкція з експлуатації

The ATS-25Max features an intuitive touch screen interface and a rotary tuning knob for navigation and control.

Close-up of ATS-25Max touch screen interface

Зображення: Детальний view of the ATS-25Max's touch screen display, showing frequency, signal strength meter, volume control, and various touch buttons for functions like MUTE, VOL, AGC, ATT, HAM, BAND, FREQ, MODE, BFO, STEP, BANDW, and NEXT.

5.1 Основна операція

  • Увімкнення/вимкнення живлення: Use the switch on the rear panel.
  • Регулювання гучності: Adjust the volume using the 'VOL' button on the touch screen or the dedicated volume control if available.
  • Налаштування: Use the large rotary knob on the right side of the unit to tune frequencies. The 'STEP' button on the screen allows you to change the tuning step size.

5.2 Вибір режиму

Tap the 'MODE' button on the touch screen to cycle through available modulation modes:

  • FM: Frequency Modulation (64-108 MHz, with RDS support).
  • AM: Amplitude Modulation (for MW and SW bands).
  • SSB: Single Sideband (LSB/USB, for amateur radio and utility signals).
  • CW: Continuous Wave (Morse code).
  • RTTY: Radioteletype.
  • FT4/FT8: Digital modes for weak signal communication.

5.3 Frequency Input and Band Selection

  • Прямий частотний вхід: Tap the frequency display area on the screen to bring up a numeric keypad, allowing direct entry of desired frequencies.
  • Вибір діапазону: Use the 'BAND' button to cycle through predefined frequency bands (e.g., LW, MW, SW, FM).
  • Broadcast Search: The receiver supports automatic broadcast searching. Refer to the on-screen menu for this function.

5.4 Decoding Functions

The ATS-25Max supports various decoding functions:

  • Декодування CW: Displays decoded Morse code on the screen.
  • RTTY, FT4, FT8 Decoding: Decodes and displays digital communication. The DIGI decoder buffer can be scrolled, and decoded data can be saved to a 'decoder.log' file in SPIFFS.
  • Audio Spectrums: View four different audio spectrums for signal analysis.

5.5 Налаштування мови

The device supports multiple languages. Navigate to the system settings menu (usually accessible via a gear icon or 'MENU' button on the screen) to change the interface language to French, Brazilian Portuguese, Polish, or other supported languages.

6. Технічні характеристики

ОсобливістьСпецифікація
Номер моделі1112212770
БрендEpheyFIF
Дисплей2.4-дюймовий сенсорний екран
матеріалАлюмінієвий сплав Casing
ПідключенняUSB Type-C (Charging/Data), 3.5mm Audio Jack, BNC Antenna
Джерело живленняBuilt-in 3.7V/3000mA Lithium Battery
Максимальний зарядний струм1.2А
Вихідна потужність аудіо1.5 Вт
Розміри (Д x Ш x В)120 x 115 x 48 mm (excluding protruding parts)
Діапазон частот FM64-108 MHz (with RDS)
Діапазон частот LW153-500 кГц
Діапазон частот СВЧ520-1710 кГц
Діапазон частот SW1730-30000 кГц
AM Bandwidth1-6 кГц
SSB Bandwidth0.5-4.0 кГц

7. Технічне обслуговування

7.1 Очищення

  • Протріть пристрій м’якою сухою тканиною. Для стійкого бруду використовуйте злегкаamp тканину з м’яким милом, потім витріть насухо.
  • Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the casing або екран.

7.2 Догляд за акумулятором

  • Щоб продовжити термін служби акумулятора, уникайте частого повного розряджання акумулятора.
  • If storing the unit for an extended period, charge the battery to approximately 50% every 3-6 months.

7.3 оновлень мікропрограми

The manufacturer may release firmware updates to improve performance or add new features. Check the official product support page periodically for the latest firmware and instructions on how to update your device via the Type-C USB port.

8. Вирішення проблем

If you encounter issues with your ATS-25Max receiver, refer to the table below for common problems and solutions.

проблемаМожлива причинаРішення
Пристрій не включається.Акумулятор розрядився.Заряджайте пристрій за допомогою кабелю Type-C.
No reception or weak signal.Antenna not connected or incorrect mode.Ensure antenna is securely connected. Check the Antenna Mode Switch is set to the correct band. Extend the telescopic antenna fully.
Сенсорний екран не реагує.Тимчасовий збій програмного забезпечення.Restart the device. If issue persists, ensure screen is clean and dry. Use the provided stylus for precision.
Audio distortion or no sound.Volume too low, MUTE engaged, or faulty headphones.Increase volume. Check if 'MUTE' is active on screen. Test with different headphones or use the internal speaker.
Decoding functions not working.Incorrect mode selected or weak signal.Ensure the correct decoding mode (CW, RTTY, FT4, FT8) is selected. Improve signal strength.

9. Гарантія та підтримка

9.1 Інформація про гарантію

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

9.2 Підтримка клієнтів

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly through the platform where you purchased the product. Provide your model number (1112212770) and a detailed description of the issue to expedite support.

© 2024 EpheyFIF. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.