Dragon LED Stereo Gaming Headset

Dragon LED Stereo Gaming Headset

User Manual

  • DESIGNED FOR EXTENDED GAMING COMFORT
  • TRUE STEREO SOUND 2.1 CHANNEL
  • HIGH SENSITIVITY FLEXIBLE MICROPHONE

CLEANING AND CARE

Clean the gaming headset with a soft dry cloth.
Do not use any abrasive cleaning agents or chemical cleaners as this may damage the product.

TECHNICAL SPECIFICATIONS

  • Speaker Diameter: 50mm
  • Impedance:210 Ω +/- 15%
  • Sensitivity: 98dB +/- 3dB
  • Frequency: 20-20000Hz
  • Mic Dimension: 6.0.*2.7mm
  • Mic sensitivity: -38 +/- 3dB
  • Mic Impedance: 2.20 Ω
  • Directivity: Omnidirectional
  • Led working voltage: DC5V +/- 15%
  • LED working current: 30 mA
  • Headset interface: USB +2 X 3.5mm Jack
  • Cable length: 2m +/- 0.3m

PARTS AND FEATURES

PARTS AND FEATL JRES

  1. AUDIO PLUG
  2. MICROPHONE PLUG
  3. USB (FOR LED LIGHTS)
  4. MICROPHONE
  5. LED LIGHTS
  6. SPEAKER
  7. VOL UME KNOB
  8. 3. 5MM MAL E-TO-FEMALE
    Y-SPLITTER CABLE ADAPTER

GaMNG HEADSET SET-UP

  1. Connect the headset to a source (computer, gaming, console, etc.). Use the 3.5mm male-to-female Y-Splitter cable adapter included if necessary.
  2. Plug the USB connector to any available USB port. (Be aware that this is an optional step and is only used to activate the LED display. This does not affect the overall audio/headset functionality.)
  3. Your headset is now ready to use! Open your computer’s sound settings to fine-tune the headset to your liking. Some gaming consoles require users to route the audio to the headset from the console’s main audio settings. Please refer to your console for specific instructions.