TTLOCK H31B Series Smart Lock User Manual
TTLOCK H31B Series Smart Lock

Special Attention: 

  1. Mechanical keys please keep outdoor, just in case keys lock in doors.
  2. Please charge for the battery when low wattage alarm.
  3. Reading this manual carefully before installation and keep it for future reference.

Lock Structure

Lock Structure

Mortise

Mortise

Installation

Turn the handle

Notice: Adjust the handle according to the direction you open the door

  1. Loose Four Screws
    Turn the handle
  2. Left Open the Handle Toword the Left; Right Open the Handle Toword the Right.
    Turn the handle
  3. Reinstall the Screw After Adjusting the Direection
    Turn the handle
  4. Loose Four Screws
    Turn the handle
  5. Left Open the Handle Toword the Left; Right Open the Handle Toword the Right.
    Turn the handle
  6. Reinstall the Screw After Adjusting the Direection
    Turn the handle

Installation Diagram 

Step 1 Install Mortise
Installation Diagram 

Step 2 Install Sliding Screw Casing and Fixed Front Panel
Installation Diagram 

The screw casing place is adjustable from 55mm to 100mm far from the square shaft.
Depending on the location of the hole-drilling or the old door hole.

Step 3 Connect Front and Back Panels
Installation Diagram 

Step 4 Install Back Panel
Installation Diagram 

Step 5 Install the Battery
Installation Diagram 

Specifications

Suitable for ModelsH31B
MaterialsZinc Alloy
Front Panel Lock Size270•70•20mm
Back Panel Lock Size270•70•20mm
Lock Weight3KG
Unlocking wayBluetooth
Gateway(option)
Fingerprint
Password
Card
Mechanical key
ColourSilver
Black
Doors ApplicableAluminum door
Wooden doorSliding doorSwing door
Working Voltage6V/8x AAA Batteries
Door Thickness to Fit30.80mm
Data Capacity500 Password
SOO Card
Working Temperature-25T-60t
Working Humidity20%-90%
Low Wattage AlarmLess than 4.5V

System Initialization

Open the cover plate of the back panel ,long press the “Reset” button on the back panel for 5s, press “000#”,and the initialization is complete
System Initialization

Registration

Connect lock to the phone

  1. Android mobile phone, please scan the left QR code as above
    QR Code
    Connect lock
  2. Apple mobile phone, please scan the right QR code as above
    QR Code
    Connect lock
  3. You can also search for TTLock in the APP store for download
    Connect lock
  4. Register a new account (phone number or email) or login with an existing account.
    Connect lock
  5. Touch the lock screen to light, click “+ Add Lock”
    Connect lock
  6. The lock nearby will appear on the phone screen, Click “+”
    Connect lock
  7. Re-name the lock
    Connect lock
  8. The lock added successfully
    Connect lock

User Management

Bluetooth management
After mobile phone and door lock connected, Click ” ” as show as figure2-1 to unlock. (the phone is within 5meters from the door lock)
User Management

Remote control management (Option)
After confirming that your phone and door lock are connected to the gateway, click ” ” as show as figure 2-1 to unlock.
You can unlock it anywhere you have a network. (How to set up the gateway to connect to your phone refer to step 5.3)
User Management

e-Key management
Click on the ” ” as shown in figure 2-1,you can send the eKey to other users of TTlock to authorize the unlock˄the receiver must be download the APP and resitter an account˅ɠ Enter recipient’s account of TTlock, set the name and effective time of the eKey as shown in figure 2-2ɒSendɒThe recipient’s account has Bluetooth unlock permission

The Admin password management
Click ” “as shown in figure 2-1ɒSee Basic ɒAdmin Passcode as shown in finger2-3ɒinput Passcode on the keypad of lock ɒ “#” to unlock.
User Management

Dynamic password management
Click ” “as shown in finger 2-1ɒfinger 2-4 You can set the effective time and effective number of passwordsɒGenerate passwordɒInput password to unlock.
User Management

Unlock records
Click ” “as shown in finger 2-1ɒyou can query your unlock record as shown in finger 2-5
User Management

IC Cards management
Click ” ” as shown in finger 2-1ɒClick ” “ɒAdd IC Cards as finger 2-6
User Management

Add Gateway – optional and not included, will be purchased separately

Light Status

Light Status

Pair the Gateway with APP

  1. Activate the APP
    Gateway with APP
  2. Press”=
    Gateway with APP
  3. Select (Gateway
    Gateway with APP
  4. Select [G2] Gateway with APP
  5. Plug in the gateway and power it on, while the light flashes alternately in red and blue
    Gateway with APP
  6. Press”+” sign
    Gateway with APP
  7. Add Gateway
    Gateway with APP
  8. Select the network and fill in the password
    Gateway with APP
  9. Add complete

Packing List

    PicturePacking ListPacking List  Packing ListPacking List
NameFront PanelBack PanelUser ManualMortise
Quantity1111
    PicturePacking ListPacking ListPacking List  Packing List
NameStrikeStrike BoxMechanical KeyCard
Quantity1123
    Picture   Packing ListPacking List  Packing List Packing List
NameFixing screws 1(For Battery Cover)Opposite Pull ScrewSliding ScrewSliding Screw Casing
Quantity23*122
    Picture  Packing List   Packing ListPacking List   Packing List
NamePointed Screw (For Wooden Door)Fixing screws 2 (For Aluminum Door)Waterproof rubber plateGateway – will be purchased separately
Quantity4421 (Optional)

Documents / Resources

TTLOCK H31B Series Smart Lock [pdf] User Manual
H31B Series Smart Lock, H31B Series, Smart Lock, Lock

References

Leave a comment

Your email address will not be published. Required fields are marked *