TRIPP LITE B127M-101-H HDMI over Cat6 Extenders for 
Medical Applications Owner's Manual

TRIPP LITE B127M-101-H HDMI over Cat6 Extenders for Medical Applications Owner's Manual

tripplite.com/warranty

tripplite.com/support

Package Contents

B127M-004-H Splitter Unit

  • External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
  • International Plug Adapters: NEMA 1-15P North America; AS/NZS 3112 Australia; BS 1363 U.K.; CEE 7/16 Schuko
  • Mounting Hardware
  • Owner’s Manual

B127M-100-H Receiver Unit

  • Mounting Hardware
  • Owner’s Manual

B127M-101-H Extender Kit

  • External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
  • International Plug Adapters: NEMA 1-15P North America; AS/NZS 3112 Australia; BS 1363 U.K.; CEE 7/16 Schuko
  • Mounting Hardware
  • Owner’s Manual

Optional Accessories

  • N202-Series Cat6 24 AWG Solid-Wire Patch Cables
  • P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables

Product Features

B127M-004-H

  • Split and extend an HDMI signal to four receivers up to 230 ft. (70 m) away over STP Cat6 cabling
  • Supports video resolutions up to 4K x 2K (3840 x 2160) @ 60 Hz, as specified in HDMI 2.0, with 4:4:4 Chroma Subsampling
  • Support up to 7.1-channel surround sound audio
  • Power-over-Cable (PoC) technology provides power from splitter unit to all connected receiver units
  • HDCP 2.2 and HDR-compatible
  • Multi-resolution support allows all connected receivers to connect to any 1080p, 4K/30 Hz or 4K/60 Hz HDMI display without affecting the resolution of the other connected displays
  • Local HDMI port supports 4K/60 Hz video
  • Meets IEC 61000-4-2 (ESD) Test Level 4 Standard (8 KV Contact, 15 KV Air), IEC 60601-1-2 & CISPR 11 Group 1 Class EMI/RFI Standards for medical environments
  • Includes mounting hardware that enables the splitter unit to be wall-mounted, rack-mounted or pole-mounted
  • Plug-and-play – no software or drivers required

Product Features

B127M-100-H

  • Receive an HDMI signal from a B127M transmitter/splitter up to 230 ft. (70 m) away over STP Cat6 cabling
  • Supports video resolutions up to 4K x 2K (3840 x 2160) @ 60 Hz, as specified in HDMI 2.0, with 4:4:4 Chroma Subsampling
  • Support up to 7.1-channel surround sound audio
  • Power-over-Cable (PoC) technology provides power to the receiver from a connected extender/splitter
  • HDCP 2.2 and HDR-compatible
  • Meets IEC 61000-4-2 (ESD) Test Level 4 Standard (8 KV Contact, 15 KV Air), IEC 60601-1-2 & CISPR 11 Group 1 Class EMI/RFI Standards for medical environments
  • Includes mounting hardware that enables the receiver unit to be wall-mounted, rack-mounted or pole-mounted
  • Plug-and-play – no software or drivers required

Product Features

B127M-101-H

  • Transmitter extends an HDMI signal to the receiver up to 230 ft. (70 m) away over STP Cat6 cabling
  • Supports video resolutions up to 4K x 2K (3840 x 2160) @ 60 Hz, as specified in HDMI 2.0, with 4:4:4 Chroma Subsampling
  • Support up to 7.1-channel surround sound audio
  • Power-over-Cable (PoC) technology provides power from transmitter unit to connected receiver unit
  • HDCP 2.2 and HDR-compatible
  • Multi-resolution support allows connected receiver to connect to any 1080p, 4K/30 Hz or 4K/60 Hz HDMI display
  • Local HDMI port supports 4K/60 Hz video
  • Meets IEC 61000-4-2 (ESD) Test Level 4 Standard (8 KV Contact, 15 KV Air), IEC 60601-1-2 & CISPR 11 Group 1 Class EMI/RFI Standards for medical environments
  • Includes mounting hardware that enables the transmitter and receiver units to be wall-mounted, rack-mounted or polemounted
  • Plug-and-play – no software or drivers required

Disclaimer

Before installation, please check the following settings of your source(s) and TV/monitor(s):

  1. Set display to 60 Hz. Double-check factory settings, as default can be set to a lower frequency (Hz) than advertised.
  2. Ensure the input setting of your monitor is set at HDMI 2.0. Some displays may have default setting at HDMI 1.4.
  3. Verify your monitor has the HDR feature enabled. Some displays may have this feature disabled as a factory setting.
  4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/monitor. Confirm with your TV/monitor manufacturer which HDMI ports support UHD Deep Color.

Note: To connect a local monitor to the transmitter in your installation, the UHD Deep Color setting may need to be disabled on your local TV/ monitor (depending make/mode) to achieve 4K @ 60 Hz resolution.

Mounting Instructions

The B127M-004-H, B127M-100-H and B127M-101-H include mounting hardware that allows for a variety of mounting methods.

The following images illustrate how the included mounting brackets can be attached for different installations.

Note: The model shown in the below images is for illustrative purposes only. Your product may vary by model number, size or port orientation.
The mounting options for all over Cat6 units are the same.

Wall-Mount

TRIPP LITE B127M-101-H HDMI over Cat6 Extenders for Medical Applications - Wall-Mount

19” Rack-Mount Pole-Mount

TRIPP LITE B127M-101-H HDMI over Cat6 Extenders for Medical Applications - 19” Rack-Mount, Pole-Mount

Standard Splitter Installation

Notes:

  • Test to ensure the entire installation works properly before pulling cables through ceilings/walls.
  • To achieve maximum distance and performance, use 24 AWG solidwire Cat6 cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher than 24 AWG will result in shorter extension distance. Higher-gauge cabling, such as 26 AWG, has a more limited transmission capability than lower-gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
  • The installation diagram shows a B127A-004-H splitter unit and B127M-100-H receiver units.
  • External power is not required for remote receiver units due to Power over Cable (PoC) technology incorporated in the units.

Standard Splitter Installation

TRIPP LITE B127M-101-H HDMI over Cat6 Extenders for Medical Applications - Standard Splitter Installation

  1. Make sure all equipment in the installation—such as TVs, Blu-ray™ players and the splitter—is powered OFF.
  2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect the HDMI source to the INPUT port on the splitter unit.

Standard Extender Kit Installation

3. Optional for B127M-004-H: Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT port on the B127M-004-H unit.
4. Using Cat6 cable, connect the RJ45 output ports on the local splitter unit to the RJ45 input ports of up to four remote receiver units.
5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI port to a monitor.
6. Turn on the power to your connected TVs/monitors. The LOCAL (orange) LED will illuminate to indicate the local port has been connected to a display.
7. Connect the external power supply to the splitter unit. Plug it into an available wall outlet or a Tripp Lite surge protector, power distribution unit (PDU) or uninterruptible power supply (UPS). The POWER (green) LED on the local splitter unit will illuminate to indicate the unit is receiving power from the external power supply. The POWER (green) LED on the remote receiver units will illuminate to indicate the unit is receiving power from the local splitter unit through PoC technology.
8. Turn on the power to the HDMI source. The OUTPUT (orange) LED on the local splitter unit will illuminate to indicate a signal is being received from the source.
9. The (orange) RJ45 LED will illuminate on both the local splitter and remote receiver units to indicate a signal is being received from the source to display. The screen should now display on the connected monitor(s).

Notes:

  • Test to ensure the entire installation works properly before pulling cables through ceilings/walls.
  • To achieve maximum distance and performance, use 26 AWG solidwire Cat6 cable. Using stranded-wire Cat6 cable or cable with a gauge (AWG) size higher than 26 AWG will result in shorter extension distance. Higher-gauge cabling, such as 26 AWG, has a more limited transmission capability than lower-gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
  • The installation diagram shows a B127A-101-H transmitter and receiver kit.
  • External power is not required for remote receiver units due to Power over Cable (PoC) technology incorporated in the units.

TRIPP LITE B127M-101-H HDMI over Cat6 Extenders for Medical Applications - Standard Extender Kit Installation

  1. Make sure all equipment in the installation—such as TVs, Blu-ray™ players and the transmitter and receiver units—are powered OFF.
  2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect the HDMI source to
    the INPUT port on the transmitter unit.
  3. Optional for B127M-101-H: Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT port on the B127M-101-H transmitter unit.
  4. Using Cat6 cable, connect the RJ45 output port on the local transmitter unit to the RJ45 input port of the remote receiver unit.
  5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI port to a monitor.
  6. Turn on the power to your connected TVs/monitors. The LOCAL (orange) LED will illuminate to indicate the local port has been connected to a display
  7. Connect the external power supply to the transmitter unit. Plug the unit into an available wall outlet or a Tripp Lite surge protector, power distribution unit (PDU) or uninterruptible power supply (UPS). The POWER (green) LED on the local splitter unit will illuminate to indicate the unit is receiving power from the external power supply. The POWER (green) LED on the remote receiver unit will illuminate to indicate the unit is receiving power from the local transmitter unit through PoC technology.
  8. Turn on the power to the HDMI source. The OUTPUT (orange) LED on the local transmitter unit will illuminate to indicate a signal is being received from the source.
  9. The (orange) RJ45 LED will illuminate on both the local transmitter and remote receiver units to indicate a signal is being received from the source to display. The screen should now display on the connected monitor(s).

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase.

TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

disposal iconUnder the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

  • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
  • Send the new equipment back for recycling when this ultimately becomes waste

WARNING

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

 

 

Tripp.lite logo

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

 

 

Documents / Resources

TRIPP LITE B127M-101-H HDMI over Cat6 Extenders for Medical Applications [pdf] Owner's Manual
B127M-101-H, B127M-100-H, B127M-004-H, HDMI over Cat6 Extenders for Medical Applications, HDMI over Cat6 Extenders, Cat6 Extenders, B127M-101-H, Extenders

Leave a comment

Your email address will not be published.