TRAILER VALET Blackout Series Drop Hitch

Operating Instructions

STEP 1: Place the Drop Hitch at the desired drop on the drawbar in order to ensure that your vehicle and trailer are properly positioned.

STEP 2: Insert the keylock pin into the Drop Hitch when you have achieved the desired position along the drawbar.

STEP 3: To lock the keylock pin in place, turn key counter clockwise. To unlock, turn key clockwise.

STEP 4: Pull keylock pin to ensure that it has been engaged. Do not operate without making sure keylock assemble is securely locked in place.

Important safety information

Ensure safety chains are attached between vehicle and trailer. DO NOT attach chains directly to hitch. Do not exceed either the Tow vehicle’s rated load or your Trailer Valet Drop Hitch capacity rating. Secure your Trailer Valet Drop Hitch to receiver with keylock or hitch pin.

Ball Mounts & Drop Hitches

SKU BSDH00 10 BSDH00 11 BSDH00 20 BSDH00 40
Ball Size 2” 2” 2” and 2-5/16”
Drop 2” 4” 2” 0-6”
Rise N/A N/A 2” 5-1/4”
Type Standard Standard Reversible Adjustable
Capacity 5,000 LBS 6,000 LBS 6,000/7,500 LBS 14,000 LBS
Material Steel Steel Steel Steel
Class Class III Class III Class III Class V
SKU BSDH00 30 BSDH00 31 BSDH00 32 BSDH00 33
Ball Size 2” and 2-5/16” 2” and 2-5/16” 2” and 2-5/16” 2” and 2-5/16”
Drop 0-4” 0-6” 0-8” 0-10”
Rise 0-4” 0-6” 0-8” 0-10”
Type Adjustable Adjustable Adjustable Adjustable
Capacity 8,000/10,000 LBS 8,000/10,000 LBS 8,000/10,000 LBS 8,000/10,000 LBS
Material aluminum aluminum aluminum aluminum
Class Class IV Class IV Class IV Class IV

Documents / Resources

TRAILER VALET Blackout Series Drop Hitch [pdf] Instruction Manual
BSDH0010, BSDH0011, BSDH0040, BSDH0030, BSDH0020, BSDH0031, BSDH0033, BSDH0032, Blackout Series, Drop Hitch

Leave a comment

Your email address will not be published. Required fields are marked *