DOG PALACE Premium Insulated Dog House
Thank you for purchasing a DOG PALACE PREMIUM Insulated Dog House.
If you have any questions regarding assembly please contact us at 1-866-570-6845 or [email protected].
DO NOT RETURN THIS PRODUCT TO THE STORE WHERE YOU PURCHASED IT.
|4 – 3” cap screws|
|4- hinged screw covers|
|4 – 2” coated deck screws|
MANUFACTURED IN THE USA212 SOUTH MAIN ST.
Ste. Marie, IL 62459
E-mail: [email protected]http://www.asldoghouses.com/doghouse-products/dog-palace-doghouse.html
A place for a panel on a flat surface with round support rings facing down. Insert rear end panel into end opposite of drain hole.
Insert side panels into the floor and rear end panel, front corner first as illustrated.
Place the roof on side panels and slide into the rear end panel as illustrated.
Insert 2 Cap Screws through 2 Screw Hinged Covers. Screw the assembly through one of the holes near the top of the end panel and into the roof with a Phillips screwdriver (snug only) then close the Hinged Screw Cover.
Insert front-end panel assembly with door into foor as illustrated (repeat Step 4 assembly instructions).
Screw 2 Coated Deck Screws into the 1/8” dia. predrilled holes at each end of the floor with a Phillips screwdriver. (Snug Only do not over tighten)
Documents / Resources
|TRACTOR SUPPLY 1571875 DOG PALACE Premium Insulated Dog House [pdf] Instruction Manual|
1571875, DOG PALACE Premium Insulated Dog House