GBP-2005 Instruction Manual
Revision 1.0
Dated: 08-16-2024
GBP-2005 Gateway
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Trackonomy
© Trackonomy Systems 2023
Technical Support
Thank you for choosing Trackonomy. Please contact your Trackonomy account manager for account and product support. To contact Trackonomy directly, visit us at www.trackonomy.com or call 1-833-TRACKONOMY.
Trademarks
Trackonomy Systems, TrackonomyTM, InvisiblesTM and the Trackonomy logo are trademarks and/or registered trademarks of Trackonomy Systems, Inc. Information is subject to change without notice.
Other brand and product names are trademarks or registered trademarks of their respective holders.
© 2020 Trackonomy Systems, Inc. All rights reserved.
Recycling
Smart devices are electronic products including a battery. Return used devices to Trackonomy for recycling& refurbishing. When disposing labels, please consult the appropriate state, regional or local regulations for additional e-waste requirements. Contact Trackonomy if you have any questions.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, Trackonomy reserves the right to make changes to the products described in this document without notice.
Trackonomy does not assume any liability that may occur due to the use or application of the products in unintended ways.
Trackonomy requires that the GBP-2005 and GBP family of products need to be used according to all local and regional regulations. GBP-2005 and GBP family of products consists of a proprietary suite of electronics components that are not user serviceable. For any use case scenarios or use case scenarios or additional support, please contact Trackonomy.
Overview
Trackonomy provides a quick and easy solution for labeling and tracking your assets starting at the point of origination. You use a simple app on a tablet to set-up, configure and test your GBP-2005 product.
Step-by-step Usage
- Secure your GBP-2005 to the asset and enable it.
- Use the tablet application to link the GBP-2005 to an asset.
- Test the link using the tablet app’s built-in test routine.
- When the app successfully confirms the link, the asset is ready to be deployed.
- Repeat steps 1 to 4 if you have multiple assets.
- Use the final check table to confirm you have not missed any assets.
- Task complete. Deploy and monitor the assets.
Tracking Assets
Trackonomy provides multiple options for monitoring assets. One of them is App based and for deployments inside a facility. Alternatively, the device also works with Trackonomy’s Asset Origination Infrastructure or Full Visibility Infrastructure.
3.1 Find an asset application
Use the Find an Asset app to locate assets tagged with a GBP-2005 inside a facility.
- Secure your GBP-2005 to the asset and enable it.
- Use the tablet application to link the GBP-2005 to an asset.
- Test the link using the tablet app’s built in test routine.
- When the app successfully confirms the link, the asset is ready to be deployed.
- Repeat steps 1 to 4 if you have multiple assets.
- Use the final check table to confirm you have not missed any assets.
- Task complete. Deploy and monitor the assets.
- You can periodically use the App to continue monitoring.
3.2 Asset Origination and Full Visibility Infrastructure
The Asset Origination and Full Visibility Infrastructure solutions provide customized reporting and notification using Trackonomy infrastructure and our cloud solutions. Please contact your local Trackonomy sales contact for more information.
Compliance
FCC Statement 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
ISED Canada
CAN ICES-3 (B) / NMB-3 (B)
This device complies with ISED Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3 (B) / NMB-3 (B)
Exposure Warning
The antennas used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.
© Trackonomy Systems 2023
Documents / Resources
 | TRACKONOMY GBP-2005 Gateway [pdf] Instruction Manual 2AXA8-GBP-2005, 2AXA8GBP2005, GBP-2005 Gateway, GBP-2005, Gateway |