5665 Three Channel Alarm Timer
“
Product Specifications
- Alarm volume switch
- Start/Stop channel buttons
- Start/Stop All button
- Timer Clock/Clear setting button
- Seconds button
- Minutes button
- Hours button
- Battery operated
- Alarm duration switch
Product Usage Instructions
Initial Setup
- Remove the battery cover and insert batteries.
- Adjust the buzzer volume using the volume slider.
- Adjust the alarm duration using the duration slider.
- Press TIMER/CLOCK until the time appears on the screen.
- Use the Hours/Minutes/Seconds buttons to configure the alarm
and date. - Hold TIMER/CLOCK until you hear an audible beep.
- To activate the alarm, press the START/STOP ALL button when
ALARM is flashing. ALARM will appear on the display if the alarm is
active. - Set the time using the Hours/Minutes/Seconds buttons and press
TIMER/CLOCK when done. - Replace the battery cover.
Setting a Timer
- Press TIMER/CLOCK until the timer is displayed.
- Press and hold START/STOP on the timing channel to be
configured. - Use the Hours/Minutes/Seconds buttons to configure the
timer. - Press START/STOP on the timing channel to set the timer.
Starting a Timer
- To start/stop an individual channel, press the START/STOP
button for that channel. - To start/stop all channels, press the START/STOP ALL
button. - If a channel has not been configured with a set time, pressing
START/STOP on that channel or START/STOP ALL will start a count up
and TIME UP will flash on that channel.
Warranty, Service, or Recalibration
Contact the manufacturer at 12554 Old Galveston Rd. Suite B230
Webster, Texas 77598 USA for warranty, service, or recalibration.
They are accredited as a Calibration Laboratory by A2LA.
FAQ
Q: How do I adjust the alarm volume?
A: Use the volume slider to adjust the buzzer volume.
Q: How do I set the alarm duration?
A: Adjust the alarm duration using the duration slider during
initial setup.
Q: How do I start a timer?
A: Press TIMER/CLOCK until the timer is displayed, configure the
timer using the H/M/S buttons, and press START/STOP on the timing
channel to start the timer.
“`
Traceable® 3-Channel Timer
Alarm volume switch
Start/Stop channel buttons
Start/Stop All button
Timer Clock/Clear setting button Seconds button
Minutes button
Hours button
Battery
Alarm duration switch
INITIAL SETUP
Remove battery cover and insert batteries.
Use the volume slider to adjust buzzer volume.
Use the duration slider to adjust alarm duration.
Press TIMER/CLOCK until time appears on screen.
Use H/M/S buttons to configure alarm and date.
Hold TIMER/CLOCK until there is an audible beep.
Note: To activate alarm, press START/STOP ALL button when ALARM is flashing. ALARM will appear on display if alarm is active.
Use H/M/S buttons to set time; press TIMER/CLOCK when done.
Replace battery cover.
SETTING A TIMER
STARTING A TIMER
WARRANTY, SERVICE, OR RECALIBRATION
1. Press TIMER/CLOCK until timer is displayed.
2. Press and hold START/STOP on the timing channel to be configured.
3. Use H/M/S buttons to configure timer. 4. Press START/STOP on timing channel
to set timer.
Note: To recall memory, simply press START/STOP button after the timer has alarmed.
To start/stop an individual channel, press the START/STOP button for that channel.
To start/stop all channels, press the START/STOP ALL button.
Note: If a channel has not been configured with a set time, pressing START/ STOP on that channel or START/STOP ALL will start a count up and TIME UP will flash on that channel.
12554 Old Galveston Rd. Suite B230 Webster, Texas 77598 USA
Ph. 281-482-1714 · Fax 281-482-9448 support@traceable.com traceable.com
Traceable® Products are ISO 9001:2015 QualityCertified by DNV and ISO/IEC 17025:2017
accredited as a Calibration Laboratory by A2LA.
Item No. 56000-13 Model No. 5665 ©2022 1065T8_M_92-5665-00 Rev. 1 07172025
3-Channel Timer Quick-Start Guide
Documents / Resources
 | Traceable 5665 Three Channel Alarm Timer [pdf] User Guide 5665 Three Channel Alarm Timer, 5665, Three Channel Alarm Timer, Channel Alarm Timer, Alarm Timer, Timer |