Podoru Wireless Power Bank

Product Parameters

• Name: Wireless Power Bank
• Model Number: KT-D003MINI
• Battery Type: Lithium Polymer
• Material: Fireproof ABS + PC
• Battery capacity: 5000mAh (3.7V 18.5Wh)
• Rated capacity: 3000mAh (5VDC, 2A)
• Energy conversion: ≥ 60%
• USB-C input: 5VDC, 3A / 9VDC, 2A
• USB-C output: 5VDC, 2A / 9VDC, 2.2A / 12VDC, 1.67A
• Lightning input: 5VDC, 2A
• Wireless charging output: 15W Max.
• Product size: 95x65x14mm / 3.74x2.55x0.55inch
• Net weight: 120g / 4.23oz
• Total output: 5VDC, 3A (15W Max.)
• Wireless charging operating frequency range: 111-205kHz
• Wireless charging output max: 5W when simultaneous charging or discharging.

Product Description

This product is a portable charging device that provides wired and wireless charging for mobile phones, tablets, e-books, game machines, and other devices. It features wired and wireless charging, magnetic suction positioning, power indicator lights, 20W PD fast charging, dual output (including wireless), 15W wireless fast charging, and a Lightning interface. The product includes FOD, overcharge, over-discharge, and temperature protection circuits.

Features

• Magnetic Attraction: Designed for wireless charging with magnetic alignment.
• Power Indicator Lights: Four lights on the left indicate the remaining battery level.
• Fast Charging: Supports PD fast charging and 15W wireless fast charging.
• Safety Protection: Built-in FOD, overcharge, over-discharge, and temperature protection.

Operating Instructions

Checking Quantity of Electricity:

Press the power button to check the remaining electricity. The four power indicator lights on the left will show the charge level.

Wireless Charging the iPhone 12 Series or Later:

To activate wireless charging, press the power button or place your compatible device on the charger. It will be held in place magnetically. There may be a 3-5 second delay before charging begins. The product will automatically turn off wireless charging if no device is connected within 30 seconds.

Wireless charging tips:

• Ensure the device is placed on the wireless charging area (emission area of the wireless charging coil).
• The charging distance should be within 2mm. If it exceeds 2mm, adjust the device's position.
• The charging contact surface on the back of the mobile phone should not contain metal substances like iron sheets, rings, or metal protective cases.
• If intermittent charging or overheating occurs, the device's receiving coil may not be aligned with the wireless charging coil, or there might be metal foreign bodies in the protective case. Try cooling the phone, removing the case, and re-aligning.

Recharging Your Portable Charger:

Connect a compatible charging cable (Type-C or Lightning) to the corresponding input port on the power bank. The power indicator lights will flash to indicate charging. When fully charged, the lights will stop flashing.

Charging Your Device Wirelessly and Recharging Your Portable Charger Simultaneously:

The power bank can be recharged while simultaneously charging a device wirelessly.

Charging Your Phone or Earbuds Using a Charging Cable:

Connect a Type-C charging cable to the corresponding output port. The power bank will automatically turn on the output. For some smartphones, you may need to press the power button once to initiate charging.

Charge mobile phones or other digital devices:

1. Verify that the charging voltage of your digital product matches the output voltage of the power bank.
2. Use the original charging cable for your digital product. Connect one end to the digital product and the other end to the power bank's output port. The wired output terminal will automatically start charging.
3. For wireless charging, press the power button once. Place the device with wireless charging capability in the center of the power bank's wireless charging area.

Important Safety Instructions

WARNING - When using this product, basic precautions should always be followed, including:

• Read all instructions before use.
• Close supervision is necessary when used near children.
• Do not put fingers or hands into the product.
• Do not expose the power bank to rain or snow.
• Use only power supplies or chargers recommended by the manufacturer.
• Do not use the power bank in excess of its output rating.
• Do not use a damaged or modified power bank.
• Do not disassemble the power bank. Seek qualified service personnel for repairs.
• Do not expose the power bank to fire or excessive temperatures (above 100°C / 212°F).
• Have servicing performed by a qualified repair person using identical replacement parts.
• Switch off the power bank when not in use.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer's Instructions.

Reminder:

• Please read all instructions and warnings before using this product. Improper use can damage the product or cause personal injury.
• The power bank has a conversion rate, so the battery capacity is not equal to the rechargeable capacity.
• Charge your power bank regularly (at least every 5 months) to maintain its service life.
• Avoid strong physical impacts, including knocking, throwing, or squeezing.
• Store the product in a cool, dry place. Do not store in hot or humid environments or dispose of in heat or fire.
• Operating temperature: 0°C to 45°C / 32°F to 113°F.
• Storage Temperature range: -10°C to 60°C / -4°F to 140°F.
• When disposing of batteries, keep different electrochemical systems separate.
• Non-professionals are strictly prohibited from disassembling this product.
• Avoid using electrical appliances or loads that exceed the output current of the product.
• If consumers violate the product manual and improperly apply or warn, the company will not bear any legal responsibility for damage caused.

SAVE THESE INSTRUCTIONS

Contact Information

• Email: podoruservices@hotmail.com
• USA: 1-323-405-8820 (Mon-Fri 9am - 6pm PST)
• Canada: 1-343-513-1011 (Mon-Fri 9am - 6pm PST)
• UK: 44-7488879800 (Mon-Fri 6pm - 3am BST)

Compliance Information

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

The RF transmitter on this device has not been tested for FCC compliance for those conditions where client transmitters are also in operation.

Certifications: CE, FCC, RoHS

Country of Origin: Made in China