1. Giriş
Thank you for choosing the ENEACRO SDS-MAX Hammer Drill, Model Z1C-SKT-4001WP. This powerful industrial tool is designed for heavy-duty drilling and demolition tasks in concrete, brick, and masonry. Featuring a 1500W motor and 12 Joules of impact force, it delivers efficient and reliable performance. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal use and longevity of your tool.
Image 1.1: ENEACRO SDS-MAX Hammer Drill, Model Z1C-SKT-4001WP, with key components labeled.
2. Genel Güvenlik Talimatları
Always follow basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operation.
- Çalışma Alanı Güvenliği: Çalışma alanınızı temiz ve iyi aydınlatılmış tutun. Dağınık veya karanlık alanlar kazalara davetiye çıkarır. Elektrikli aletleri yanıcı sıvılar, gazlar veya toz gibi patlayıcı ortamlarda çalıştırmayın.
- Elektriksel Güvenlik: Elektrikli aletlerin fişleri prize uygun olmalıdır. Fişte hiçbir şekilde değişiklik yapmayın. Topraklanmış veya topraklanmış yüzeylerle vücut temasından kaçının. Elektrikli aletleri yağmura veya ıslak koşullara maruz bırakmayın.
- Kişisel Güvenlik: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry.
- Alet Kullanımı ve Bakımı: Elektrikli aleti zorlamayın. Uygulamanız için doğru elektrikli aleti kullanın. Herhangi bir ayarlama yapmadan, aksesuar değiştirmeden veya elektrikli aletleri saklamadan önce fişi prizden çekin.
- Hizmet: Elektrikli aletinizin bakımını, yalnızca aynı yedek parçaları kullanan kalifiye bir tamirciye yaptırın.
3. Paket İçeriği
Verify that all items are present upon unpacking. If any parts are missing or damaged, contact customer support.
- ENEACRO 4001WP Rotary Hammer (1 unit)
- SDS-MAX 280mm Drill Bit (1 unit)
- 320mm SDS-MAX Chisel (1 unit)
- Auxiliary Grip (1 unit)
- Replaceable Carbon Brush Set (1 set)
- Lubricating Grease (1 unit)
- Dust Cap (1 unit)
- Tool Bag (1 unit)
Resim 3.1: Üzeriview of the ENEACRO SDS-MAX Hammer Drill and included accessories, showing dimensions and individual components.
4. Kurulum ve Montaj
4.1 Attaching the Auxiliary Grip
The 360° adjustable auxiliary grip provides better control and reduces fatigue. Loosen the grip clamp, slide the grip onto the front of the tool, and rotate it to the desired position. Tighten the clamp Çalıştırmadan önce güvenli bir şekilde.
4.2 Inserting SDS-MAX Bits
The SDS-MAX quick-release chuck allows for tool-free bit changes.
- Clean the shank of the SDS-MAX drill bit or chisel.
- Pull back the chuck collar and insert the bit into the chuck.
- Uç, kilitleme mekanizmasına oturana kadar hafifçe döndürün.
- Release the chuck collar. The bit should be held firmly but have a slight axial play, which is normal for SDS-MAX systems.
- Çıkarmak için, mandrenin yakasını geri çekin ve ucu dışarı çekin.
Resim 4.1: Yakın çekim views of the heat outlet, aluminum alloy housing, anti-dust bottom, and SDS-MAX chuck mechanism.
5. Kullanım Talimatları
The ENEACRO SDS-MAX Hammer Drill features three operating modes for various applications.
5.1 Mod Seçimi
Use the mode selector switch located on the side of the tool to choose the desired function:
- Darbeli Delme Modu: For drilling into concrete, stone, and other hard materials. This mode combines rotation and hammering action.
- Chisel-Only Mode (Demolition): For demolition work such as breaking concrete or removing tiles. This mode provides hammering action without rotation.
- Adjustable Chiseling Function: Allows you to adjust the angle of the chisel for optimal working position. To use, select this mode, rotate the chisel to the desired angle, then switch back to Chisel-Only mode to lock the position.
Image 5.1: Visual representation of the three operating modes: Hammer Drilling, Hammer Only (Chiseling), and Chisel Angle Adjustment.
5.2 Çalıştırma Yönergeleri
- Ensure the bit is securely inserted and the mode is correctly selected.
- Hold the tool firmly with both hands using the main handle and the auxiliary grip.
- Apply steady, moderate pressure. Do not force the tool; let the hammer action do the work.
- Entegre Emniyet Debriyajı will engage to protect against kickback if the bit binds in the material, reducing wrist strain.
- The Titreşim Önleme Sistemi minimizes hand strain during prolonged use.
Image 5.2: Demonstrating the safety clutch feature during operation, which protects against kickback.
Image 5.3: Illustrating the vibration control feature, which minimizes workplace vibrations to reduce user fatigue.
6. Bakım
Düzenli bakım, darbeli matkabınızın uzun ömürlü olmasını ve optimum performans göstermesini sağlar.
6.1 Temizlik
- Temizleme işlemine başlamadan önce aleti daima güç kaynağından ayırın.
- Wipe down the tool with a clean, damp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
- Ensure the dust-protected bottom construction and heat outlets are clear of debris to prevent overheating.
6.2 Yağlama
Periodically apply the provided lubricating grease to the SDS-MAX chuck and bit shanks to ensure smooth operation and prevent wear.
6.3 Karbon Fırça Değişimi
The carbon brushes are wear parts and should be inspected periodically. Replace them when they are worn down to their limit to maintain motor performance. Refer to the included carbon brush set for replacement instructions or consult a qualified technician.
7. Sorun Giderme
Bu bölüm, karşılaşabileceğiniz yaygın sorunları ele almaktadır. Burada listelenmeyen sorunlar için müşteri desteğiyle iletişime geçin.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Araç başlamıyor | No power supply; faulty power cord; worn carbon brushes. | Check power connection and outlet; inspect power cord for damage; replace carbon brushes. |
| Reduced impact/drilling power | Worn drill bit/chisel; insufficient lubrication; worn internal components. | Replace worn accessories; apply lubricating grease; contact service for internal inspection. |
| Aşırı titreşim veya gürültü | Loose components; damaged bit; internal malfunction. | Check for loose parts and tighten; replace damaged bit; discontinue use and contact service. |
| Alet aşırı ısınıyor | Tıkalı havalandırma delikleri; sürekli ağır yük; arızalı motor. | Clean ventilation slots; allow tool to cool down; contact service if problem persists. |
8. Teknik Özellikler
| Özellik | Şartname |
|---|---|
| Marka | ENEACRO |
| Model Numarası | Z1C-SKT-4001WP |
| Güç Kaynağı | Kablolu Elektrik |
| Motor Gücü | 1500 B |
| Etki Enerjisi | 12 Joule |
| Maksimum Dönme Hızı | 520 RPM |
| Etki Oranı | Dakikada 4100 vuruş |
| Cilttage | 230 Volt |
| Maksimum Ayna Boyutu | 40 mm |
| Matkap Tipi | Hammer Drill (SDS-MAX) |
| Fonksiyonlar | Hammer Drilling, Chisel Only, Adjustable Chiseling |
| Ağırlık | 6.9 Kilogram |
| Boyutlar (U x G x Y) | 16.54" x 4.33" x 10.63" |
| Ek Özellikler | 360° Adjustable Handle, Safety Clutch, Vibration Control, Dust-Protected Bottom |
9. Garanti ve Destek
ENEACRO provides a 24-month defect-free service for this product. For any inquiries, technical assistance, or warranty claims, please contact ENEACRO customer support. We aim to provide a response within 12 hours.
For further information or to register your product, please visit the official ENEACRO webLütfen siteyi ziyaret edin veya satın alma belgelerinizde verilen iletişim bilgilerine başvurun.