MiBOXER TRI-PW

MiBOXER TRI-PW 500W AC Triac Dimmer User Manual

Model: TRI-PW

1. Giriş

The MiBOXER TRI-PW 500W AC Triac Dimmer is designed for precise control of lighting systems in residential and commercial environments. This device integrates WiFi and 2.4GHz technology, allowing for remote operation via compatible applications and MiBOXER remote controls. It supports triac dimming, ensuring compatibility with a wide range of lighting fixtures, including LED, halogen, and incandescent lights, for smooth and consistent dimming from full brightness to a soft glow.

MiBOXER TRI-PW 500W AC Triac Dimmer

Resim 1.1: Üzeriview of the MiBOXER TRI-PW 500W AC Triac Dimmer unit.

2. Güvenlik Bilgileri

  • Elektrik tesisatı: Kurulum, yerel elektrik yönetmeliklerine ve kurallarına uygun olarak, yetkili bir elektrikçi tarafından yapılmalıdır.
  • Güç Bağlantısının Kesilmesi: Dimmer cihazını takmadan veya bakımını yapmadan önce daima devre kesiciden elektriği kesin.
  • Cilttage Uyumluluk: Giriş hacmini sağlayıntage matches the dimmer's specifications (100-240V AC).
  • Yük Kapasitesi: Do not exceed the maximum load capacity of 500W. Overloading can cause damage or fire.
  • Sadece İç Mekanda Kullanım: This device is intended for indoor use in dry locations. Avoid exposure to moisture or extreme temperatures.
  • Uyumluluk: Use only with compatible dimmable lighting fixtures (LED, halogen, incandescent).

3. Paket İçeriği

Paketin tüm bileşenlerinin mevcut olduğunu doğrulayın:

  • MiBOXER TRI-PW 500W AC Triac Dimmer Unit
  • User Manual (may be included as a separate document)
MiBOXER TRI-PW Dimmer with packaging and manual

Image 3.1: MiBOXER TRI-PW Dimmer unit shown with its packaging and a user manual.

4. Ürün Özellikleri

  • Powerful 500W Capacity: Supports high-power loads, suitable for various lighting fixtures.
  • Triac Dimming Technology: Provides flicker-free dimming for LED, halogen, and incandescent lights.
  • WiFi & 2.4GHz Control: Integrates with WiFi and MiBOXER 2.4GHz systems for smartphone or remote control.
  • Push Control Compatibility: Allows for quick, on-site dimming adjustments via a push button.
  • Uygulama ve Ses Kontrolü: Compatible with major smart home platforms for app-based and voice command control.
  • Hafıza Fonksiyonu: Retains previous lighting settings after power cycles.

5. Özellikler

Özellik Detay
Marka MiBOXER
Model Adı ÜÇ-PW
Özel Özellik 500W AC Triyak Dimmer
Frekans Bant Sınıfı Tek Bantlı
Kablosuz İletişim Standardı 802.11b
Uyumlu Cihazlar PUSH karartma desteği
Önerilen Kullanımlar Home lighting systems
Bağlantı Teknolojisi Wifi
Akıllı Ev Uyumluluğu Smart Home Compatible (e.g., Amazon Alexa, Google Assistant)
Kapsam LED, halogen, incandescent, high-power loads
Sıklık 2.4 GHz
Boyutlar (Yaklaşık) 117 mm (U) x 45 mm (G) x 24 mm (Y)
MiBOXER TRI-PW Dimmer dimensions diagram

Image 5.1: Technical drawing showing the approximate dimensions of the TRI-PW dimmer.

MiBOXER TRI-PW packaging dimensions

Image 5.2: Packaging dimensions for the MiBOXER TRI-PW dimmer.

6. Kurulum ve Kurulum

Önemli: Kurulum işlemine başlamadan önce devre kesiciden elektriğin kesildiğinden emin olun.

Kablolama Şeması

The MiBOXER TRI-PW dimmer supports two primary wiring methods for integration with a push switch. Both methods are suitable for triac dimming LED lights, traditional filament lamps ve halojen lamps.

Connection Diagram for MiBOXER TRI-PW Dimmer

Image 6.1: Wiring diagrams for connecting the MiBOXER TRI-PW dimmer with a push switch.

Method 1: Single-Wire Push Switch Connection

  • Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
  • Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
  • Connect one wire from the push switch to the 'PUSH' terminal on the dimmer.
  • Connect the other wire from the push switch to the Live (L) input terminal.

Method 2: Two-Wire Push Switch Connection

  • Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
  • Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
  • Connect the two wires from the push switch directly to the 'PUSH' terminals on the dimmer.

After wiring, secure the dimmer in a suitable electrical box or enclosure. Restore power at the circuit breaker.

7. Kullanım Talimatları

7.1. Push Switch Control

  • Kısa Basış: Turn the lights ON or OFF.
  • Uzun basma: Adjust the brightness level. Release the button to set the desired brightness.

7.2. WiFi App Control

The TRI-PW dimmer supports control via a smart app (e.g., Tuya Smart app). No additional 2.4G gateway is required for app control.

  1. Download the compatible smart home app from your device's app store.
  2. Hesabınıza kaydolun veya giriş yapın.
  3. Put the dimmer into pairing mode (refer to the app's instructions or the dimmer's specific pairing procedure, usually involving a long press of the 'SET' button or power cycling).
  4. Follow the in-app instructions to add the device to your network.
  5. Once connected, you can control the dimmer's ON/OFF state and brightness from your smartphone.
Smartphone controlling light dimmer via Tuya app

Resim 7.1: Örn.ample of controlling the dimmer using a smartphone application.

7.3. 2.4GHz Remote Control

The dimmer can be paired with MiBOXER 2.4GHz remote controls for direct wireless control.

  1. Dimmerin açık olduğundan emin olun.
  2. Refer to your MiBOXER 2.4GHz remote control's manual for specific pairing instructions. Typically, this involves pressing a "Link" or "Pair" button on the remote within a few seconds of powering on the dimmer or pressing the dimmer's 'SET' button.
  3. A successful pairing is usually indicated by the connected light flashing.

7.4. Sesli Kontrol (Alexa/Google Asistan)

The TRI-PW dimmer is compatible with smart home voice assistants like Amazon Alexa and Google Assistant when integrated through a compatible smart home app.

  1. Ensure your dimmer is successfully connected to the smart home app (e.g., Tuya Smart).
  2. Amazon Alexa veya Google Home uygulamanızı açın.
  3. Enable the skill or service for the smart home app you are using (e.g., "Tuya Smart" skill).
  4. Discover devices. Your dimmer should appear in the list.
  5. Assign a name to your dimmer (e.g., "Living Room Light").
  6. You can now control your light using voice commands, such as "Alexa, turn on Living Room Light" or "Hey Google, dim Living Room Light to 50%."
Amazon Alexa and Google Assistant devices

Image 7.2: The dimmer is compatible with voice control platforms like Amazon Alexa and Google Assistant.

8. Bakım

  • Temizlik: Disconnect power before cleaning. Wipe the dimmer with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Denetleme: Kablo bağlantılarının sıkılığını ve aşınma veya hasar belirtilerini periyodik olarak kontrol edin.
  • Donanım Yazılımı Güncellemeleri: If available, check the smart home app for firmware updates to ensure optimal performance and security.

9. Sorun Giderme

Sorun Olası Neden Çözüm
Işıklar açılmıyor. No power, incorrect wiring, faulty bulb, dimmer not paired. Check circuit breaker. Verify wiring according to diagrams. Test bulb. Re-pair dimmer with app/remote.
Işıklar titriyor veya vızıldıyor. Incompatible bulb, overloaded circuit, loose wiring. Ensure bulbs are dimmable and compatible with triac dimmers. Reduce load. Check wiring connections.
Dimmer not responding to app/remote. Dimmer out of range, WiFi issue, not paired. Ensure dimmer is within WiFi/2.4GHz range. Check WiFi router. Re-pair dimmer with app/remote.
Wi-Fi'ye bağlanılamıyor. Incorrect WiFi password, 5GHz network, dimmer not in pairing mode. Verify WiFi password. Ensure you are connecting to a 2.4GHz network. Put dimmer into WiFi pairing mode.

10. Garanti ve Destek

This MiBOXER TRI-PW dimmer comes with a 2 yıllık garanti satın alma tarihinden itibaren. Bu garanti, normal kullanımda malzeme ve işçilikteki kusurları kapsar.

The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or acts of nature.

For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase receipt and product model number (TRI-PW) available when contacting support.

Daha fazla bilgi için şu adresi ziyaret edebilirsiniz: Amazon'da MiBOXER Mağazası.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.