KIMISS Micro ATX Motherboard LGA 1155 User Manual

1. Üzeriview

This manual provides comprehensive instructions for the KIMISS Micro ATX Motherboard, designed for LGA 1155 socket processors. It supports Intel Core i3, i5, i7, Pentium, and Celeron CPUs, offering a robust platform for computing and gaming. This motherboard integrates essential features for a stable and high-performance desktop system.

Temel Özellikler:

• Superior CPU Compatibility: Supports 2nd generation LGA 1155 processors, including i7 2600k, i5 2500s, i5 2400s, i3 2130, Pentium G530/G630/G860, and similar CPUs.
• High Capacity Memory: Features DDR3 dual-channel non-ECC memory support, operating at 1066/1333/1600 MHz with a maximum capacity of 16GB.
• Fast M.2 NVMe NGFF Interface: Equipped with a high-speed M.2 hard drive interface, supporting both NVMe and NGFF dual modes for flexible storage options.
• Stable Power and Output: Utilizes a three-phase power design with solid-state capacitors and a 24+4 pin power socket for stable operation. Supports VGA and HD Multimedia Interface output, and includes a PCIe X16 graphics card slot.
• Numerous Input and Output Interfaces: Provides 6 USB 2.0 ports, 3 SATA2.0 ports, 1 M.2 hard drive interface, 10/100 Mbps LAN, VGA, HD Multimedia Interface, RJ45, and a 3-in-1 audio port.

2. Ürün Düzeni

Familiarize yourself with the various components and connectors on your motherboard before installation. This diagram illustrates the key areas and interfaces.

The motherboard features a central LGA 1155 CPU socket, two DDR3 memory slots, an M.2 NVMe/NGFF slot, and multiple SATA ports for storage. The rear I/O panel includes VGA, HD Multimedia Interface, USB ports, and a LAN port.

3. Kurulum ve Kurulum

Follow these steps carefully to install your motherboard and its components. Ensure your system is powered off and unplugged before beginning any installation.

3.1. CPU Kurulumu

1. Anakart üzerinde LGA 1155 CPU soketini bulun.
2. Yükleme kolunu yavaşça kaldırın ve CPU soket kapağını açın.
3. Align the triangular mark on your Intel LGA 1155 CPU with the corresponding mark on the socket. Carefully place the CPU into the socket without forcing it.
4. Priz kapağını kapatın ve yükleme kolunu tık sesi gelene kadar yerine itin.
5. Termal macunu uygulayın ve CPU soğutucusunu üreticinin talimatlarına göre takın.

3.2. RAM (Bellek) Kurulumu

1. Anakart üzerindeki iki adet DDR3 DIMM yuvasını bulun.
2. DIMM yuvasının her iki ucundaki klipsleri açın.
3. DDR3 bellek modülündeki çentiği DIMM yuvasındaki anahtarla hizalayın.
4. Hafıza modülünü, klipsler yerine oturana kadar yuvaya sıkıca yerleştirin. Her iki klipsin de kapalı olduğundan emin olun.

3.3. M.2 NVMe/NGFF Drive Installation

1. Anakart üzerindeki M.2 yuvasını bulun.
2. Remove the M.2 standoff screw from the motherboard.
3. Align the notch on your M.2 drive with the key in the M.2 slot and insert it at an angle.
4. Gently push the M.2 drive down and secure it with the standoff screw.

3.4. Güç Bağlantıları

Güç kaynağı ünitesinin (PSU) kablolarını anakarta bağlayın.

• 24-pin ATX Güç Konnektörü: Connect the main 24-pin power cable from your PSU to the 24-pin ATX connector on the motherboard. Ensure it is fully seated.
• 4-pin 12V CPU Power Connector: Connect the 4-pin 12V CPU power cable from your PSU to the corresponding connector near the CPU socket.

3.5. Çevresel Bağlantılar

• SATA Aygıtları: Connect your SATA hard drives or SSDs to the SATA2.0 ports using SATA data cables.
• Ön Panel Konektörleri: Connect the power switch, reset switch, HDD LED, and power LED cables from your computer case to the front panel header on the motherboard. Refer to your case manual for specific pin assignments.
• USB Bağlantı Noktaları: Connect front panel USB 2.0 ports to the internal USB headers.
• Ses: Connect front panel audio cables to the appropriate audio header.
• Genişletme Kartları: Install any PCIe X16 graphics cards or PCIe X1 expansion cards into their respective slots.

4. Kullanım Talimatları

Tüm bileşenler kurulduktan ve bağlandıktan sonra sisteminizi açabilirsiniz.

4.1. İlk Önyükleme

1. Connect your monitor to either the VGA or HD Multimedia Interface port on the motherboard's rear I/O panel.
2. USB bağlantı noktalarına bir klavye ve fare bağlayın.
3. Plug in the power cable to your PSU and turn on the power switch on the PSU.
4. Bilgisayarınızın kasasının üzerindeki güç düğmesine basın.
5. Sistem açılmalı ve BIOS/UEFI açılış ekranı görüntülenmelidir.

4.2. BIOS/UEFI Erişimi

To enter the BIOS/UEFI setup, press the designated key (usually SİL or F2) repeatedly during the initial boot sequence. From the BIOS/UEFI, you can configure boot order, system settings, and monitor hardware status.

5. Bakım

Doğru bakım anakartınızın uzun ömürlü olmasını ve optimum performans göstermesini sağlar.

5.1. Genel Temizlik

• Regularly clean dust from inside your computer case using compressed air.
• Ensure all fans (CPU, case, PSU) are free from obstructions to maintain adequate airflow.
• Always power off and unplug your system before cleaning.

5.2. BIOS Güncellemeleri

Üreticinin periyodik olarak kontrol edin website for BIOS/UEFI updates. Updates can improve system stability, add support for new hardware, or fix bugs. Follow the manufacturer's instructions carefully when performing a BIOS update, as an incorrect procedure can damage the motherboard.

6. Sorun Giderme

Bu bölümde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

6.1. Güç yok

• Ensure the PSU is plugged into a working power outlet and its switch is ON.
• Verify that the 24-pin ATX and 4-pin 12V CPU power connectors are securely attached to the motherboard.
• Check the front panel power switch connection to the motherboard.

6.2. Ekranda Görüntü Çıktısı Yok

• Confirm that the monitor is connected to the correct video output port (VGA or HD Multimedia Interface) on the motherboard or dedicated graphics card.
• Monitörün açık olduğundan ve doğru giriş kaynağına ayarlandığından emin olun.
• RAM modüllerini yeniden yerleştirin. Yanlış takılmış RAM, ekran gelmemesinin yaygın bir nedenidir.
• If using a dedicated graphics card, ensure it is properly seated in the PCIe slot and has adequate power connected.

6.3. Sistem Başlatılamıyor

• Anakart ve bileşenlere giden tüm güç bağlantılarını kontrol edin.
• Verify that the CPU and CPU cooler are correctly installed.
• RAM modüllerinin doğru şekilde yerleştirildiğinden emin olun.
• Disconnect all non-essential peripherals (e.g., extra hard drives, expansion cards) and try booting with only the CPU, one RAM stick, and the primary display.
• Clear the CMOS (Complementary Metal-Oxide-Semiconductor) by removing the CMOS battery for a few minutes or using the clear CMOS jumper (refer to motherboard diagram for location).

7. Özellikler

Detailed technical specifications for the KIMISS Micro ATX Motherboard.

8. Garanti Bilgileri

The KIMISS Micro ATX Motherboard comes with a manufacturer's warranty. Please refer to the following details:

• Üretici Garantisi: 2 yıl.
• İade politikasi: Typically 30 days for refund/replacement, subject to retailer terms.

For specific warranty claims or detailed terms and conditions, please retain your proof of purchase and contact the retailer or manufacturer directly.

9. Müşteri Desteği

If you encounter any issues not covered in this manual or require further assistance, please contact your retailer or the manufacturer's customer support. Have your product model number (KIMISSvytfq4rgks) and purchase information ready when seeking support.