giriiş
Thank you for choosing the Simyke BME28-RX Video Baby Monitor Add-on Display. This unit is designed to expand your existing Simyke BME28 or BMS28 series baby monitor system, allowing you to view your baby from multiple locations or replace a lost/damaged parent unit. It features a high-quality IPS screen for clear visuals and a long-lasting battery for extended use. Please read this manual carefully before use to ensure proper operation and safety.
Güvenlik Bilgileri
- Keep the monitor unit and power adapter out of reach of children.
- Do not place the monitor unit near water or heat sources.
- Use only the provided power adapter. Using unauthorized adapters may damage the unit and void the warranty.
- Avoid dropping or subjecting the unit to severe impact.
- Cihazı kendiniz sökmeye veya onarmaya çalışmayın. Yardım için müşteri desteğiyle iletişime geçin.
- Çalışma sırasında ünitenin etrafında uygun havalandırmanın olduğundan emin olun.
Kutuda Neler Var?
- 1x Simyke BME28-RX Baby Monitor (Display Only)
- 1x Güç Adaptörü
- 1x Kullanım Kılavuzu
Ürün Bittiview
Şekil 1: Ön view of the Simyke BME28-RX display unit, featuring the IPS screen and navigation buttons.
Şekil 2: The display unit with its screen active, showing a live feed and various status indicators like signal strength and temperature.
Şekil 3: Arka view of the display unit, highlighting the integrated speaker and the foldable kickstand for tabletop placement.
Display Unit Components
- IPS Ekran: High-resolution display for clear video feed.
- Yön tuşları: Up, Down, Left, Right, OK for menu navigation.
- Güç Düğmesi: Açmak/kapatmak için basılı tutun.
- Mikrofon Düğmesi: Press to activate two-way audio.
- Konuşmacı: For two-way audio and alerts.
- Şarj Portu: Güç adaptörünü bağlamak için.
- Ayaklık: Masa üstü yerleştirme için.
Kurmak
1. Charging the Display Unit
Before first use, fully charge the display unit. Connect the provided power adapter to the charging port on the side of the display unit and plug it into a power outlet. The charging indicator light will illuminate. A full charge typically takes approximately 3-4 hours.
2. Pairing with a Camera Unit
This display unit is an add-on and must be paired with a compatible Simyke BME28 or BMS28 series camera unit. If your camera is already paired with another display, you can add this new display. Refer to your original camera unit's manual for specific pairing instructions. Generally, the steps involve:
- Turn on both the display unit and the camera unit.
- Access the 'Camera Pairing' or 'Add Camera' option in the display unit's menu.
- Press the pairing button on the camera unit (location varies by model, usually on the back or bottom).
- The display unit will search for and connect to the camera. Once connected, the camera's video feed will appear on the screen.
Kullanım Talimatları
Güç Açık/Kapalı
- To turn on: Press and hold the Power button (⑂) until the screen illuminates.
- To turn off: Press and hold the Power button (⑂) until the screen goes blank.
Temel Fonksiyonlar
- Ses Kontrolü: Use the Up/Down navigation buttons to adjust the speaker volume.
- Parlaklık Kontrolü: Navigate to the 'Settings' menu and select 'Brightness' to adjust screen illumination.
- Menü Navigasyonu: Use the Up/Down/Left/Right navigation buttons to move through menu options. Press the OK button to confirm a selection.
Temel Özellikler
Şekil 4: Two-Way Audio feature, allowing communication with your baby.
Şekil 5: VOX Mode and Temperature Monitoring capabilities.
Şekil 6: Day and Night monitoring, ensuring visibility in all lighting conditions.
- İki Yönlü Ses: Press and hold the Microphone button (🎤) to speak through the camera unit to your baby. Release the button to hear your baby.
- VOX Modu (Sesle Çalışan Santral): This mode conserves battery by turning off the screen when no sound is detected from the baby's room. The screen will automatically light up when sound is detected. Enable/disable VOX mode in the 'Settings' menu.
- Sıcaklık İzleme: The display unit shows the real-time temperature of the baby's room, as detected by the camera unit. Set temperature alerts in the 'Settings' menu.
- Çoklu Kamera View: Birden fazla kamerayı eşleştirdiyseniz, kameralar arasında geçiş yapabilirsiniz. views or enable a scan mode to cycle through them automatically. This feature supports up to 4 cameras.
- Kızılötesi Gece Görüşü: The camera unit automatically switches to infrared night vision in low-light conditions, providing a clear black-and-white image on the display unit.
Bakım
- Temizlik: Use a soft, dry cloth to clean the display unit. Do not use abrasive cleaners or solvents.
- Depolamak: If storing the unit for an extended period, ensure it is fully charged and then store it in a cool, dry place. Recharge the battery every few months to maintain its health.
- Pil Bakım: Pil ömrünü uzatmak için pili sık sık tamamen boşaltmaktan kaçının.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Cihazda elektrik yok/açılmıyor. | Pil zayıf veya tamamen bitmiş. Güç adaptörü düzgün bağlanmamış. | Connect the power adapter and charge the unit for at least 30 minutes. Ensure the adapter is securely plugged into both the unit and the outlet. |
| No video/audio from camera | Camera is off or out of range. Unit is not paired with the camera. | Ensure the camera unit is powered on and within range. Re-pair the display unit with the camera unit following the 'Pairing' instructions. |
| Poor video/audio quality | Interference from other devices. Camera too far from display. | Move the display unit closer to the camera. Avoid placing the unit near other electronic devices (e.g., Wi-Fi routers, microwaves) that may cause interference. |
| Screen freezes or unit is unresponsive | Geçici yazılım hatası. | Perform a soft reset by pressing and holding the Power button for 10-15 seconds until the unit restarts. If the issue persists, contact customer support. |
| Pil çabuk bitiyor | High screen brightness. VOX mode disabled. Aging battery. | Reduce screen brightness. Enable VOX mode to conserve power. If the battery life has significantly degraded over time, it may be reaching the end of its lifespan. |
Özellikler
| Özellik | Şartname |
|---|---|
| Model Adı | BME28-RX Display only |
| Uyumlu Cihazlar | Simyke BME28, BMS28 series baby camera |
| Ekran Türü | IPS Ekran |
| Video Yakalama Çözünürlüğü | 240P |
| Bağlantı Teknolojisi | Kablosuz (Wi-Fi) |
| Güç Kaynağı | Corded Electric and Battery Powered |
| Pil Kapasitesi | 2500mAh Lityum Polimer (dahil) |
| Pil Ömrü | 14 saate kadar |
| Kanal Sayısı | 4 (en fazla 4 kamerayı destekler) |
| Boyutlar (U x G x Y) | 4.72 x 2.6 x 0.9 inç |
| Ürün Ağırlığı | 7.8 ons |
| Renk | Beyaz |
| İç/Dış Mekan Kullanımı | Kapalı |
| Montaj Tipi | Masa Üstü Montaj |
| Özel Özellikler | Portable, 2-Way Audio, Cry Detection (VOX Mode) |
Garanti ve Destek
Simyke products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your original baby monitor system or visit the official Simyke website. If you encounter any issues not covered in this manual, please contact Simyke customer service for assistance.
Üretici: Guangdong Envision Technology Limited
Menşei ülke: Çin