1. Giriş
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your ENEACRO Demolition Jack Hammer 1700W. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
The ENEACRO Demolition Jack Hammer is a heavy-duty tool designed for demanding tasks such as home renovations, wall and floor demolition, and road surface breaking. It features a robust 1700W motor delivering 65 joules of impact energy.
2. Güvenlik Bilgileri
Elektrikli aletleri kullanırken her zaman güvenliğe öncelik verin. Güvenlik talimatlarına uyulmaması ciddi yaralanmalara veya maddi hasara yol açabilir.
- Güvenlik gözlüğü, işitme koruması, eldiven ve sağlam ayakkabılar dahil olmak üzere uygun kişisel koruyucu ekipman (KKE) giyin.
- Çalışma alanının, özellikle çocuklar ve evcil hayvanlar olmak üzere, etraftaki kimselerden uzak olduğundan emin olun.
- Inspect the tool and power cord for any damage before each use. Do not operate if damaged.
- Ellerinizi ve bol giysileri hareketli parçalardan uzak tutun.
- Aleti ıslak koşullarda veya yanıcı sıvı veya gazların bulunduğu ortamlarda çalıştırmayın.
- Always unplug the tool before changing accessories, performing maintenance, or when not in use.
- Aleti sıkıca kavrayın ve olası geri tepmelere dikkat edin.
- Use only accessories specifically designed for this demolition hammer.
3. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- ENEACRO Demolition Jack Hammer (1700W)
- Pointed Chisel
- Düz Keski
- Spare Carbon Brushes (2 pcs)
- Tube of Lubricant
- Oil Bottle Wrench
- Altıgen Anahtarlar (2 adet)
- Heavy-duty Blow-molded Case with Wheels
Image: The ENEACRO Demolition Jack Hammer, its rolling carry case, and all included accessories: pointed chisel, flat chisel, carbon brushes, lubricant, oil wrench, and hex wrenches.
4. Ürün Bittiview
Familiarize yourself with the main components of the demolition hammer:
Image: Labeled diagram showing key components including the 360° rotating handle, handle lock, all-metal housing, anti-vibration control, SDS-Hex chuck, cylinder, viewable oil port, self-lock & switch, L wrench, carbon brushes, oil port wrench, advanced lube, lubricating oil, flat chisel, and point chisel. The overall dimensions and weight (14.5kg, 69cm length, 24cm height) are also indicated.
- SDS-Hex Chuck: Hızlı ve güvenli uç değişimi için.
- 360° Dönebilen Sap: Provides flexibility for various working angles.
- Self-Lock & Switch: Tetiği basılı tutmaya gerek kalmadan sürekli çalışma imkanı sağlar.
- Anti-Vibration Control: Uzun süreli kullanımda kullanıcı yorgunluğunu azaltır.
- Viewable Oil Port: For monitoring and adding lubricant.
5. Kurulum
5.1 Sapın Takılması
The 360° rotating handle can be adjusted to the most comfortable and effective position for your task. Loosen the handle lock, rotate the handle to the desired angle, and then securely tighten the lock.
Resim: Yakın çekim view of the demolition hammer's 360-degree adjustable handle, illustrating its rotational capability for optimal control and efficiency.
5.2 Installing/Changing Chisels
- Aletin güç kaynağından çıkarıldığından emin olun.
- Clean the SDS-Hex chuck and the chisel shank.
- Insert the chisel into the chuck, pushing and rotating it slightly until it locks into place. A slight pull on the chisel should confirm it is securely seated.
- Çıkarmak için, mandreni geri çekin ve keskiyi çıkarın.
Resim: Ayrıntılı view of the SDS-Hex chuck, highlighting the mechanism for tool-free bit changes and secure locking of chisels.
6. Kullanım Talimatları
6.1 Başlatma ve Durdurma
- Güç kablosunu uygun bir 120V elektrik prizine takın.
- To start, press the trigger switch.
- For continuous operation, press the self-lock button while the trigger is engaged. Release the trigger, and the tool will continue to run.
- To stop, press the trigger switch again (if self-lock is engaged) or release the trigger.
Image: A close-up of the demolition hammer's handle, showing the red self-lock switch for continuous operation.
6.2 Yıkım Teknikleri
Hold the tool firmly with both hands. Apply steady pressure and allow the hammer to do the work. Avoid forcing the tool, as this can reduce efficiency and increase wear.
Image: A worker using the demolition hammer for house demolition, breaking through a brick wall.
Image: A worker using the demolition hammer to break apart a large stone or rock formation.
Image: A worker using the demolition hammer to break up asphalt or concrete on a road surface.
Image: A worker using the demolition hammer to break down a rocky or mountainous terrain.
The advanced shock-absorbing system helps reduce vibration, minimizing hand fatigue and ensuring a more stable and comfortable grip during extended use.
Image: An internal diagram illustrating the anti-vibration system within the demolition hammer, designed to reduce user fatigue.
7. Bakım
7.1 Yağlama
Regular lubrication is crucial for the longevity and performance of your demolition hammer. Check the viewable oil port periodically. Use the provided lubricant and oil bottle wrench to add oil as needed.
Resim: Yakın çekim view of'un viewable oil port on the demolition hammer, indicating where to check and add lubricant.
7.2 Karbon Fırça Değişimi
The carbon brushes are wear items and will need replacement over time. The package includes spare carbon brushes. Refer to the diagram for the location of the carbon brush covers. Ensure the tool is unplugged before attempting replacement.
Resim: Yakın çekim view showing the carbon brush access points on the demolition hammer, along with spare carbon brushes.
7.3 Temizlik ve Depolama
After each use, clean the tool to remove dust and debris. Store the demolition hammer and its accessories in the provided heavy-duty blow-molded case with wheels. This case ensures organization and protection during transport and storage.
Image: A person pulling the heavy-duty blow-molded case with wheels, demonstrating its portability for the demolition hammer.
8. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Araç başlamıyor | No power supply; damaged cord; faulty switch; worn carbon brushes. | Check power connection; inspect cord for damage; test switch; replace carbon brushes. |
| Reduced impact power | Insufficient lubrication; worn chisel; worn internal components. | Add lubricant; replace chisel; contact service for inspection. |
| Aşırı titreşim/gürültü | Loose parts; damaged internal components; worn chisel. | Check for loose parts; replace chisel; contact service for inspection. |
| Chisel not locking | Chuck mechanism dirty or damaged; incorrect chisel type. | Clean chuck; ensure correct SDS-Hex chisel is used; contact service if mechanism is damaged. |
9. Özellikler
| Özellik | Detay |
|---|---|
| Marka | ENEACRO |
| Model Numarası | 107HC |
| Güç Kaynağı | Kablolu Elektrik |
| Cilttage | 120 Volt |
| Ampöfke | 14.5 Amps |
| Netage | 1700 Watt |
| Etki Enerjisi | 65 Joules (48 ft/lbs) |
| Chuck Tipi | SDS-Hex |
| Ürün Boyutları | 14.17"U x 7.09"G x 28.55"Y |
| Ürün Ağırlığı | 30 Pound |
| Malzeme | Metal |
| Özel Özellikler | Adjustable Handle, Rolling Toolbox, Self-Lock Button, Vibration Control |
10. Garanti ve Destek
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official ENEACRO webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.
ENEACRO is committed to providing quality tools and customer satisfaction. For any inquiries or assistance, please reach out to our support team.